References
- Abdel-salam M.(2005). “Precise Point Positioning Using Un-Differenced Code and Carrier Phase Observations”. Ph.D thesis, University of Calg ary, Canada.
- Bakker, P. and Tiberius, C. (2016). “Real-time single-frequency precise point positioning for cars and trains “. Innovation column. GPS world magazine. January, 2016.
- Bisnath, S.N., Beran, T., Langley, R. B. (2002). “Precise platform positioning with a single GPS receiver. “ GPS World, 13(4): 42-49.
- Bisnath, S., Gao, Y. (2008).”Current State of Precise Point Positioning and Future Prospects and Limitations”. International Association of Geodesy Symposia, Vol. 133 pp. 615-623, 2008.
- Chen, W., Hu, C., Gao, S., Chen, Y., Ding, X. (2009).” Error correction models and their effects on GPS precise point positioning”. Surv. Rev. 41(313): 238-252.
- Choy, S. (2009).” An Investigation into the Accuracy of single frequency Precise Point Positioning (PPP)”. Ph.D. thesis. RMIT university, Australia.
- Colombo, O.L., Sutter, A.W., Evans, A.G. (2004).”Evaluation of Precise, Kinematic GPS Point Positioning”. In: Proceedings of ION GNSS 17th International Technical Meeting of the Satellite Division, Long Beach, California, pp. 1423-1430.
- CSRS-PPP (2017). Canadian Spatial Reference System (CSRS) Precise Point Positioning (PPP) service. http://www.geod.nrcan.gc.ca/products-produits/ppp_e.php. Accessed (10/3/2017).
- Gao, Y., Shen, X. (2001). “Improving convergence speed of carrier phase based Precise Point Positioning”. In: Proceedings of ION GNSS 13th International Technical Meeting of the Satellite Division, Salt Lake City, Utah, pp. 1532-1539.
- Geng, J., Teferle, F.N., Meng, X., Dodson, A.H. (2010). “Kinematic precise point positioning at remote marine platforms”. GPS Solutions. 14(4): 343-350.
- GPS-SPS (2008). GPS standard positioning service (SPS) specifications. http://www.gps.gov/technical/ps/2008-SPS-performance-standard.pdf. Accessed (13/5/2017).
- Huber, K. and Heuberger, F. (2010).”PPP: Precise Point Positioning – Constraints and Opportunities”. FIG Congress 2010 (Facing the Challenges – Building the Capacity) Sydney, Australia, 11-16 April 2010.
- IGS (2017). International GNSS Service (IGS) products. http://igscb.jpl.nasa.gov/components/prods.html. Accessed (10/4/2017).
- Kouba, J., Héroux, P. (2001). “Precise point positioning using IGS orbit and clock products”. GPS Solutions. 5(2): 12-28.
- Marel, H. and Bakker, P. (2012).“GNSS Solutions: single versus dual frequency precise point positioning”. InsideGNSS magazine. July/August 2012.
- Promark 3.0 Manual (2005): Promark 3.0 Receivers Reference Manual. Copyright Thales Navigation Company.
- Rizos, C., Janssen, V., Roberts, C. and Grinter, T. (2012). “Precise point positioning: is the era of differential GNSS positioning drawing to an end?”. FIG Working Week 2012. Rome, Italy, 6–10 May 2012.
- Soycan, M., Ata, E. (2011). “Precise point positioning versus traditional solution for GNSS networks”. Sci. Res. Essays. 6(4): 799-808.
- Soycan, M. (2012).” A Quality Evaluation of Precise Point Positioning within the Bernese GPS Software Version 5.0”. Arabian Journal for Science and Engineering. 37-1. Pages 147-162 Earth Sciences.
- TEQC (2017). TEQC-UNAVCO tutorial. http://facility.unavco.org/software/teqc/doc/UNAVCO_Teqc_Tutorial.pdf. Accessed (5/4/2017).
- Mireault, Y., Tétreault, P., Lahaye, F., Héroux, P., and Kouba, J. (2008).”Online Precise Point Positioning: A New, Timely Service from Natural Resources Canada”. GPS world magazine, September 2008.
- Zumberge, J. F., Heflin, M. B., Jefferson, D. C., Watkins, M. M. and Webb, F. H. (1997).”Precise Point Processing for the Efficient and Robust Analysis of GPS Data from Large Networks”, J. Geophys. Res., 102(B3), 5005-5017.