References
- Benhayoun, M., Benzaouia, A., Mesquine, F. and Hajjaji, A.E. (2013). System stabilization by unsymmetrical saturated state feedback control, 9th Asian Control Conference (ASCC), Istanbul, Turkey, pp. 1-5.
- Cen, Z., Noura, H. and Younes, Y.A. (2015). Systematic fault tolerant control based on adaptive Thau observer estimation for quadrotor UAVs, International Journal of Applied Mathematics and Computer Science 25(1): 159-147, DOI: 10.1515/amcs-2015-0012.10.1515/amcs-2015-0012
- Chen, J. and Patton, R.J. (2012). Robust Model-based Fault Diagnosis for Dynamic Systems, Vol. 3, Springer, Boston, MA.
- da Silva, J.M.G. and Tarbouriech, S. (2005). Antiwindup design with guaranteed regions of stability: An LMI-based approach, IEEE Transactions on Automatic Control 50(1): 106-111.10.1109/TAC.2004.841128
- Dardinier-Maron, V., Hamelin, F. and Noura, H. (1999). A fault-tolerant control design against major actuator failures: Application to a three-tank system, Proceedings of the 38th IEEE Conference on Decision and Control, Phoenix, AZ, USA, Vol. 4, pp. 3569-3574.
- Famularo, D., Franz, G. and Lucia, W. (2015). Multiple stuck positions actuator faults: A model predictive based reconfigurable control scheme, IEEE Conference on Decision and Control, Osaka, Japan pp. 5091-5096.
- Hu, T., Lin, Z. and Chen, B. M. (2002). An analysis and design method for linear systems subject to actuator saturation and disturbance, Automatica 38(2): 351-359.10.1016/S0005-1098(01)00209-6
- Jiang, B. and Chowdhury, F.N. (2005). Fault estimation and accommodation for linear MIMO discrete-time systems, IEEE Transactions on Control Systems Technology 13(3): 493-499.10.1109/TCST.2004.839569
- Jiang, B., Staroswiecki, M. and Cocquempot, V. (2006). Fault accommodation for nonlinear dynamic systems, IEEE Transactions on Automatic Control 51(9): 1578-1583.10.1109/TAC.2006.878732
- Li, Y. and Lin, Z. (2013). Design of saturation-based switching anti-windup gains for the enlargement of the domain of attraction, IEEE Transactions on Automatic Control 58(7): 1810-1816.10.1109/TAC.2012.2231532
- Noura, H., Theilliol, D., Ponsart, J. and Chamseddine, A. (2009). Fault-tolerant Control Systems: Design and Practical Applications, Advances in Industrial Control, Springer, Berlin/Heidelberg.
- Ossmann, D. and Varga, A. (2015). Detection and identification of loss of efficiency faults of flight actuators, International Journal of Applied Mathematics and Computer Science 25(1): 53-63, DOI: 10.1515/amcs-2015-0004.10.1515/amcs-2015-0004
- Pascal, G. and Pierre, A. (1994). A linear matrix inequality approach to H∞ control, International Journal of Robust and Nonlinear Control 4(4): 421-448.
- Qi, X., Qi, J., Theilliol, D., Zhang D., Han, J. and Song, D. (2014). A review on fault diagnosis and fault tolerant control methods for single-rotor aerial vehicles, Journal of Intelligent & Robotic Systems 73(1-4): 535-555.
- Tabatabaeipour, S.M. and Blanke, M. (2014). Calculation of critical fault recovery time for nonlinear systems based on region of attraction analysis, World Congress of the International Federation of Automatic Control, Cape Town, South Africa, pp. 6741-6746.
- Theilliol, D., Join, D. and Zhang, Y. (2008). Actuator fault tolerant control design based on a reconfigurable reference input, International Journal of Applied Mathematics and Computer Science 18(4): 553-560, DOI: 10.2478/v10006-008-0048-1.10.2478/v10006-008-0048-1
- Wu, F. and Soto, M. (2003). Extended LTI anti-windup control with actuator magnitude and rate saturations, 42nd IEEE Conference on Decision and Control, Maui, HI, USA, Vol. 3, pp. 2786-2791.
- Wu, L.B., Yang, G.H. and Ye, D. (2014). Robust adaptive fault-tolerant control for linear systems with actuator failures and mismatched parameter uncertainties, IET Control Theory & Applications 8(6): 441-449.
- Xu, D., Jiang, B. and Shi, P. (2015). Robust NSV fault-tolerant control system design against actuator faults and control surface damage under actuator dynamics, IEEE Transactions on Industrial Electronics 62(9): 5919-5928.
- Xu, F., Puig, V., Ocampo-Martinez, C., Olaru, S. and Niculescu, S.-I. (2017). Robust MPC for actuator-fault tolerance using set-based passive fault detection and active fault isolation, International Journal of Applied Mathematics and Computer Science 27(1): 43-61, DOI: 10.1515/amcs-2017-0004.10.1515/amcs-2017-0004
- Yang, G.H., Wang, H. and Xie, L. (2010). Fault detection for output feedback control systems with actuator stuck faults: A steady-state-based approach, International Journal of Robust and Nonlinear Control 20(15): 1739-1757.
- Zhang, Y. and Jiang, J. (2003). Fault tolerant control system design with explicit consideration of performance degradation, IEEE Transactions on Aerospace and Electronic Systems 39(3): 838-848.10.1109/TAES.2003.1238740