References
- 1. Amara Y., Barakat G. (2010), Analytical modeling of magnetic field in surface mounted permanent-magnet tubular linear machines, IEEE Trans. on Magnetics, 46, 3870-3884.
- 2. Batdorff M.A., Lumkes J.H. (2009), High-fidelity magnetic equivalent circuit model for an axisymmetric electromagnetic actuator, IEEE Trans. on Magnetics, 45, 3064-3072.
- 3. Bianchi N. (2000), Analytical field computation of a tubular permanent-magnet linear motor, IEEE Trans. on Magnetics, 36, 3798-3801.
- 4. Boroujeni S.T., Milimonfared J., Ashabani M. (2009), Design, prototyping and analysis of a novel tubular permanent-magnet linear machine, IEEE Trans. on Magnetics, 45, 5405-5413.
- 5. Chevailler S., Markovic M., Jufer M., Perriard Y. (2004), Linear motor optimization using an analytical model, ICEM, Cracow, Poland, 5-8 September, paper no 311 (on conference CD).
- 6. Chung M.J., Gweon D.G. (2002), Modeling of the armature slotting effects in the magnetic field distribution of a linear permanent magnet motor, Electrical Engineering, 84, 101-108.
- 7. Gieras J.F., Piech Z.J., Tomczuk B. (2011), Linear synchronous motors, CRC Press, Taylor & Francis Group, USA.
- 8. Gysen B.L.J., Meessen K.J., Paulides J.J.H., Lomonova E.A. (2011), 3-D analytical and numerical modeling of tubular actuators with skewed permanent magnets, IEEE Trans. on Magnetics, 47, 2200-2212.
- 9. Kazan E., Onat A. (2011), Modeling of air core permanent-magnet linear motors with a simplified nonlinear magnetic analysis, IEEE Trans. on Magnetics, 47, 1753-1762.
- 10. Okonkwo R.C. (2006), Design and performance of permanent-magnet DC linear motors, IEEE Trans. on Magnetics, 42, 2179-2183.
- 11. Polinder H., Slootweg J.G., Hoeijmakers M.J., Compter J.C. (2003), Modeling of a linear PM machine including magnetic saturation and end effects: maximum force-to-current ratio, IEEE Trans. on Magnetics, 39, 1681-1688.
- 12. Sheikh-Ghalavand B., Vaez-Zadeh S., Hassanpour Isfahani A. (2010), An improved magnetic equivalent circuit model for iron-core linear permanent-magnet synchronous motors, IEEE Trans. on Magnetics, 46, 112-120.
- 13. Tomczuk B., Schröder G., Waindok A. (2007), Finite element analysis of the magnetic field and electromechanical parameters calculation for a slotted permanent magnet tubular linear motor, IEEE Trans. on Magnetics, 43, 3229-3236.
- 14. Tomczuk B., Waindok A. (2009), Tubular linear actuator as a part of mechatronic system, Solid State Phenomena, 147-149, 173-178.
- 15. Tomczuk B., Waindok A., Wajnert D. (2012), Transients in the electromagnetic actuator with the controlled supplier, Journal of Vibroengineering, 14, 39-44.
- 16. Wang J., Howe D. (2005), Tubular modular permanent-magnet machines equipped with quasi-Halbach magnetized magnets – Part I: magnetic field distribution, EMF, and thrust force, IEEE Trans. on Magnetics, 41, 2470-2478.
- 17. Wang J., Howe D., Jewell G.W. (2003), Fringing in tubular permanent-magnet machines: Part II. Cogging force and its minimization, IEEE Trans. on Magnetics, 39, 3517-3522.
- 18. Wang J., Jewell G.W., Howe D. (1998), A general framework for the analysis and design of tubular linear permanent magnet machines, IEEE Trans. on Magnetics, 35, 1986-1999.