Reluctance Network Model of a Permanent Magnet Tubular Motor

Andrzej Waindok; Bronisław Tomczuk

doi:10.1515/ama-2017-0029

.blurhash-client-img { display: none !important; }

Reluctance Network Model of a Permanent Magnet Tubular Motor

Acta Mechanica et Automatica

Volume 11 (2017): Issue 3 (September 2017)

By: Andrzej Waindok and Bronisław Tomczuk

Open Access

|Oct 2017

Abstract

The reluctance network model of a permanent magnet tubular motor (PMTM) has been presented in the paper. The reluctance values of the magnetic circuit have been calculated with using analytical expressions. The air gap reluctance has been determined with using both analytical expressions and the finite element method (FEM). Using the calculation model, the flux values coupled with the windings have been obtained and used in the calculations of force value. The calculated results have been compared with numerical and measured ones.

References

1. Amara Y., Barakat G. (2010), Analytical modeling of magnetic field in surface mounted permanent-magnet tubular linear machines, IEEE Trans. on Magnetics, 46, 3870-3884.10.1109/TMAG.2010.2053850
Search in Google Scholar Back to article
2. Batdorff M.A., Lumkes J.H. (2009), High-fidelity magnetic equivalent circuit model for an axisymmetric electromagnetic actuator, IEEE Trans. on Magnetics, 45, 3064-3072.10.1109/TMAG.2009.2017531
Search in Google Scholar Back to article
3. Bianchi N. (2000), Analytical field computation of a tubular permanent-magnet linear motor, IEEE Trans. on Magnetics, 36, 3798-3801.10.1109/20.908373
Search in Google Scholar Back to article
4. Boroujeni S.T., Milimonfared J., Ashabani M. (2009), Design, prototyping and analysis of a novel tubular permanent-magnet linear machine, IEEE Trans. on Magnetics, 45, 5405-5413.10.1109/TMAG.2009.2022837
Search in Google Scholar Back to article
5. Chevailler S., Markovic M., Jufer M., Perriard Y. (2004), Linear motor optimization using an analytical model, ICEM, Cracow, Poland, 5-8 September, paper no 311 (on conference CD).
Search in Google Scholar Back to article
6. Chung M.J., Gweon D.G. (2002), Modeling of the armature slotting effects in the magnetic field distribution of a linear permanent magnet motor, Electrical Engineering, 84, 101-108.10.1007/s00202-001-0108-0
Search in Google Scholar Back to article
7. Gieras J.F., Piech Z.J., Tomczuk B. (2011), Linear synchronous motors, CRC Press, Taylor & Francis Group, USA.
Search in Google Scholar Back to article
8. Gysen B.L.J., Meessen K.J., Paulides J.J.H., Lomonova E.A. (2011), 3-D analytical and numerical modeling of tubular actuators with skewed permanent magnets, IEEE Trans. on Magnetics, 47, 2200-2212.10.1109/TMAG.2011.2139220
Search in Google Scholar Back to article
9. Kazan E., Onat A. (2011), Modeling of air core permanent-magnet linear motors with a simplified nonlinear magnetic analysis, IEEE Trans. on Magnetics, 47, 1753-1762.10.1109/TMAG.2011.2111375
Search in Google Scholar Back to article
10. Okonkwo R.C. (2006), Design and performance of permanent-magnet DC linear motors, IEEE Trans. on Magnetics, 42, 2179-2183.10.1109/TMAG.2006.880397
Search in Google Scholar Back to article
11. Polinder H., Slootweg J.G., Hoeijmakers M.J., Compter J.C. (2003), Modeling of a linear PM machine including magnetic saturation and end effects: maximum force-to-current ratio, IEEE Trans. on Magnetics, 39, 1681-1688.10.1109/TIA.2003.819010
Search in Google Scholar Back to article
12. Sheikh-Ghalavand B., Vaez-Zadeh S., Hassanpour Isfahani A. (2010), An improved magnetic equivalent circuit model for iron-core linear permanent-magnet synchronous motors, IEEE Trans. on Magnetics, 46, 112-120.10.1109/TMAG.2009.2030674
Search in Google Scholar Back to article
13. Tomczuk B., Schröder G., Waindok A. (2007), Finite element analysis of the magnetic field and electromechanical parameters calculation for a slotted permanent magnet tubular linear motor, IEEE Trans. on Magnetics, 43, 3229-3236.10.1109/TMAG.2007.894216
Search in Google Scholar Back to article
14. Tomczuk B., Waindok A. (2009), Tubular linear actuator as a part of mechatronic system, Solid State Phenomena, 147-149, 173-178.10.4028/www.scientific.net/SSP.147-149.173
Search in Google Scholar Back to article
15. Tomczuk B., Waindok A., Wajnert D. (2012), Transients in the electromagnetic actuator with the controlled supplier, Journal of Vibroengineering, 14, 39-44.
Search in Google Scholar Back to article
16. Wang J., Howe D. (2005), Tubular modular permanent-magnet machines equipped with quasi-Halbach magnetized magnets – Part I: magnetic field distribution, EMF, and thrust force, IEEE Trans. on Magnetics, 41, 2470-2478.10.1109/TMAG.2005.854328
Search in Google Scholar Back to article
17. Wang J., Howe D., Jewell G.W. (2003), Fringing in tubular permanent-magnet machines: Part II. Cogging force and its minimization, IEEE Trans. on Magnetics, 39, 3517-3522.10.1109/TMAG.2003.819449
Search in Google Scholar Back to article
18. Wang J., Jewell G.W., Howe D. (1998), A general framework for the analysis and design of tubular linear permanent magnet machines, IEEE Trans. on Magnetics, 35, 1986-1999.10.1109/20.764898
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.1515/ama-2017-0029 | Journal eISSN: 2300-5319 | Journal ISSN: 1898-4088

Journal RSS Feed

Language: English

Page range: 194 - 198

Submitted on: Oct 10, 2016

Accepted on: Aug 16, 2017

Published on: Oct 7, 2017

Published by: Bialystok University of Technology

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

Reluctance Network Method,

Tubular Linear Motors,

Electrodynamic Force Calculation

Related subjects:

Engineering,

Electrical engineering,

Electronics,

Mechanical engineering,

Mechanics,

Bioengineering and biomedical engineering,

Biomechanics,

Civil engineering,

Environmental engineering

© 2017 Andrzej Waindok, Bronisław Tomczuk, published by Bialystok University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 11 (2017): Issue 3 (September 2017)