References
- 1. Aspinwall D.K., Wise M.L.H., Stout K.J. et al. (1996), Electrical discharge texturing, Int. Journal of Machine Tools & Manufacture, 32(1-2), 183-193.
- 2. Bizi-Bandoki P., Benayoun S., Valette S. et al. (2011), Modifications of roughness and wettability properties of metals induced by femtosecond laser treatment, Applied Surface Science, 257(12), 5213-5218.
- 3. Braun D., Greiner Ch., Schneider J. et al. (2014), Efficiency of laser surface texturing in the reduction of friction under mixed lubrication, Tribology international, 77, 142-147.
- 4. Cannon A.H., King W.P. (2009), Casting metal microstructures from a flexible and reusable mold, Journal of Micromechanics and Microengineering, 19, 1-6.
- 5. Costa H.L., Hutchings I.M. (2009), Effects of die surface patterning on lubrication in strip drawing, Journal of Materials Processing Technology, 209(3), 1175-1180.
- 6. CZ Ferro-Steel (2011), ČSN 11373 – non-alloy steel for construction purposes (http://www.czferrosteel.cz/pdf/tyce-11373.pdf)
- 7. Demir A.G., Maressa P., Previtali B. (2013), Fibre laser texturing for surface functionalization, Physics Procedia, 41, 759-768.
- 8. Etsion I. (2005), State of the art in laser surface texturing, Journal of Tribology, 127(1), 248-253.
- 9. Etsion I., Kligerman Y., Halperin G. (1999), Analytical and experimental investigation of laser-textured mechanical seal faces, Tribology Transactions, 42(3), 511-516.
- 10. Gualtieri E., Borghi A., Calabri L. et al. (2009), Increasing nano-hardness and reducing friction of nitride steel by laser surface texturing, Tribology International, 42(5), 699-705.
- 11. Huang J., Beckemper S., Gillner A. et al. (2010), Tunable surface texturing by polarization-controlled three-beam interference, Journal of Micromechanics and Microengineering, 20(9), p. 095004.
- 12. Ibatan T., Uddin M.S. and Chowdbury M.A.K. (2015), Recent development on surface texturing in enhancing tribological performance of bearing sliders, Surface & coatings Technology, 272, 102-120.
- 13. Iyengar V.V., Nayak B.K., Gupta M.C. (2011), Ultralow reflectance metal surfaces by ultrafast laser texturing, Applied Optics, 49(31), 5983-5988.
- 14. Jeng Y-R. (1996), Impact of Plateaued Surfaces on Tribological Performance, Tribology Transactions, 39(2), 354-361.
- 15. Lu X., Khonsari M.M. (2007), An experimental investigation of dimple effect on the Stribeck curve of journal bearings, Tribology Letters, 27(2), 169-176.
- 16. Ma Ch., Bai S., Peng X. et al. (2013), Improving hydrophobicity of laser textured SiC surface with micro-square convexes, Applied Surface Science, 266(1), 51-56.
- 17. Ma Ch., Zhu H. (2011), An optimum design model for textured surface with elliptical-shape dimples under hydrodynamic lubrication, Tribology International, 44(9), 987-995.
- 18. Man H.C., Chiu K.Y., Guo X. (2010), Laser surface micro-drilling and texturing of metals for improvement of adhesion joint strength, Applied Surface Science, 256(10), 3166-3169.
- 19. Mourier L., Mazuyer D., Lubrecht A.A. et al. (2006), Transient increase of film thickness in micro-textured EHL contacts, Tribology International, 39(12), 1745-1756.
- 20. Ortabasi U., Meier D.L., Easoz J.R. et al. (1997), Excimer micromachining for texturing silicon solar cells, Lasers As Tools For Manufacturing II, SPIE Press, 54-64.
- 21. Plančak M., Kostka P., Schrek A. (2012), Dictionary of metal forming, Nakladateľstvo STU, Bratislava.
- 22. Preciz (2012), 1.2842 (90MnCrV8, 19 312 / 19 313),http://www.preciz.cz/sluzby-hlavni/material-normal/1.2842)
- 23. Qiu M., Minson B., Raeymaekers B. (2013), The effect of texture shape on the friction coefficient and stiffness of gas-lubricated parallel slider bearings, Tribology International, 67, 278-288.
- 24. Rech B., Kluth O., Repmann T. et al. (2002), New materials and deposition techniques for highly efficient silicon thin film solar cells, Solar Energy Materials and Solar Cells, 74(1-4), 439-447.
- 25. Ronen A., Etsion I., Kligerman Y. (2001), Friction-reducing surface-texturing in reciprocating automotive components, Tribology Transactions, 44(3), 359-366.
- 26. Samad-Zadeh A., Harsono M., Belikov A. et al. (2011), The influence of laser-textured dentinal surface on bond strength, Dental Materials, 27(10), 1038-1044.
- 27. Scaraggi M. (2012), Textured surface hydrodynamic lubrication: Discussion, Tribology Letters, 48(3), 375-391.
- 28. Schaeffer R.D. (2012), Fundamentals of laser micromachining, CRC Press. London.
- 29. Shen C. and Khonsari M.M. (2015), Numerical optimization of texture shape for parallel surfaces under unidirectional and bidirectional sliding, Tribology International, 82, 1-11.
- 30. Stašić J., Gaković B., Perrie W. et al. (2011), Surface texturing of the carbon steel AISI 1045 using femtosecond laser in single pulse and scanning regime, Applied Surface Science, 258(1), 290-296.
- 31. Tang W., Zhou Y., Zhu H. et al. (2013), The effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contact, Applied surface science, 273, 199-204.
- 32. Engineering ToolBox (2014), Friction and coefficients of friction, (http://www.engineeringtoolbox.com/friction-coefficients-d_778.html)
- 33. Varenberg M., Halperin G., Etsion I. (2002), Different aspects of the role of wear debris in fretting wear, Wear, 252(11-12), 902-910.
- 34. Vilhena L.M., Sedlaček M., Podgornik B. et al. (2009), Surface texturing by pulsed Nd:YAG laser, Tribology International, 42(10), 1496-1504.
- 35. Wahl R., Schneider J., Gumbsch P. (2012), Influence of the real geometry of the protrusions in microtextured surfaces on frictional behaviour, Tribology Letters, 47(3), 447-453.
- 36. Yan J., Zhang Z., Kuriyagawa T. et al. (2010), Fabricating micro-structured surface by using single-crystalline diamond endmill, Int. Journal of Advanced Manufacturing Technology, 51, 957-964.
- 37. Zhu X.P., Lei M.K., Ma T.C. (2003), Surface morphology of titanium irradiated by high-intensity pulsed ion beam, Nuclear Instruments & Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 211(1), 69-79.
- 38. Zum Gahr K.H., Wahl R., Wauthier K. (2009), Experimental study of the effect of microtexturing on oil lubricated ceramic/steel friction pairs, Wear, 267(5-8), 1241-1251.