References
- 1. Antipov Yu.A. (1995), The crack in the line section of elastic media in the presence of dry friction (in russian), Prikl. matematika i mehanika, 59, Vyp. 2, 290-306.
- 2. Aravas N., Sharma S.M. (1991), An elastoplastic analysis of the interface crack with contact zones, J. Mech. Phys. Solids, 39, 311-344.
- 3. Arhipenko K.M., Kriviy O.F. (2008), Interfacial beam at different types of contact interaction with inhomogeneous anisotropic plane (in ukrainian), Mashinoznavstvo, 8, No 3 (129), 16-21.
- 4. Bogdanovich P.N., Tkachuk D.V. (2009), Thermal and thermo-mechanical effects in sliding contact (in russian), Treniye i iznos, 30, No 3, 214-229.
- 5. Brussat T.R., Westmann R.A. (1974), Interfacial slip around rigid fiber inclusion, Journal of Composite Materials, 8, No. 4, 364-377.
- 6. Cherepanov G.P. (1966), On the development of cracks in compressed bodies (in russian), Prikladnaya matematika i mehanika, 30, No 1, 82-93.
- 7. Comninou M. (1977), The interface crack, J. Appl. Mech., 44, 631-636.
- 8. Comninou M., Schmueser D. and Dundurs J. (1980), Frictional slip between a layer and a substrate caused by a normal load, Int. J. Engn. Sci., 18, 131-137.
- 9. Datsyshyn O.P., Kadyra V.M. (2006), A fracture mechanics approach to prediction of pitting under fretting fatigue conditions, Int. J. of Fatigue, 28, No 4, 375-385.
- 10. Evtushenko A.A., Sulim G.T. (1981), Stress concentration near a cavity filled with a liquid, Soviet Materials Science, 16, No. 6, 546-549.
- 11. Goryacheva I.G. (2001), Mechanics of frictional interaction (in russian), Moskva, Nauka.
- 12. Goryacheva I.G., Rajeev P.T. and Farris T.N. (2001), Wear in partial slip contact, J. Tribology, 123, 848-856.
- 13. Herrmann K.P., Loboda V.V. (1999), On interface crack models with contact zones situated in an anisotropic biomaterial, Archive of App. Mech., 69, 317-335.
- 14. Hills D.A, Nowell D. and Sackfield A. (1993), Mechanics of elastic contact, Butterworth-Heinemann, Oxford.
- 15. Johnson K.L. (1985), Contact mechanics, Cambridge: Cambridge University press.
- 16. Kharun I.V., Loboda V.V. (2003), A set of interface cracks with contact zones in combined tension-shear field, ActaMechanica, 166, 43-56.
- 17. Kit G.S., Martynyak R.M. and Machishyn I.M. (2003), The effect of fluid in the contact gap on the stress state of conjugate bodies, Ibid, 39, No 3, 292-299.
- 18. Kundrat M.M., Sulym H.T. (2003), Prefracture zones in the composition of high-modulus elastic inclusion with symmetric and antisymmetric load (in ukrainian), Matematychni problem mehaniky neodnoridnyh struktur, Lviv, 322-324.
- 19. Loboda V.V., Kharun I.V. (2001), Plane Problem of a Crack on the Interface of Orthotropic Plates with Friction of Crack Lips, Materials Science, 37, Issue 5, 735-745.
- 20. Malanchuk N. et al. (2007), Local sliding of bodies surface inhomogeneities caused by the actions of power and heat loads (in ukrainian), Mashinoznavstvo, No 7, 15-20.
- 21. Martynyak R.M., Kryshtafovych A. (2000), Friction contact of two elastic half-planes with local recesses in boundary, J. Friction and Wear, 21, No 4, 6-15.
- 22. Martynyak R.M. et al. (2005), Elastic interaction of two half-planes shear in the local area borders on contact gap (in ukrainian), Mat. Metody ta fiz.-meh. polya, 48, No 3, 101-109.
- 23. Ostryk V.I., Ulitko A.F. (2006), Wiener-Hopf method to contact problems of theory of elasticity (in russian), Kiev, Naukova dumka.
- 24. Panasyuk V.V. et al. (1976), Distribution tense neighborhood of cracks in the plates and shells (in russian), Kiev, Naukova dumka.
- 25. Pasternak Ya.M., Sulym H.T., Piskozub L.G. (2010), Models of thin inclusion with the account of imperfect contact with the medium (in russian), Proc. of VI International symposium on Tribo-Fatigue MSTF 2010 (Minsk, 25 oct. - 1 nov. 2010) in 2 parts, part 2., Minsk, BGU, 399-404.
- 26. Piskozub J.Z., Sulim G.T. (2008), Thermoelastic equilibrium of piecewise homogeneous solids with thin inclusions, Journal of Engineering Mathematics. Special Issue Thermomechanics, 61, 315-337.
- 27. Popov G.Ya. (1966), Plane contact problem of the theory of elasticity with the forces of adhesion and friction (in russian), Prikladnaya matematika i mehanika, 30, No 3, 551-563.
- 28. Pyriev S.Yu. et al. (2012), Thermomechanical wear during quasi-stationary frictional heating (in russian), Treniye i iznos, 33, No 5, 435-443.
- 29. Schmueser D., Comninou M., Dundurs J. (1980), Separation and slip between a layer and substrate caused by a tensile load, Ibid, 18, 1149-1155.
- 30. Sekine H.(1982), Mechanics of debonding along the surfaces of dispersed flat inclusions in composite materials (A model of debonding along the surface of a flat inclusion), Trans. ASME. Journal of Applied Mechanics, 48A, No. 11 (435), 1415-1420.
- 31. Sulym H.T. (2007), Fundamentals of the mathematical theory of thermoelastic equilibrium of deformable bodies with thin inclusions (in ukrainian), Lviv, Doslidno-vydavnychyy tsentr NTSh.
- 32. Sulym H.T., Piskozub Y.Z. (2004), Conditions of contact interaction (review) (in ukrainian), Mat. metody i fiz.-meh. polya, 47, No 3, 110-125.
- 33. Ulitko A.F., Ostrik V.I. (2002), Interfacial crack subjected to frictional contact (in ukrainian), Visnyk Kyiv. un-tu., Ser. fiz.-mat. nauky, 2, 133-141.
- 34. Weertman J., Lin I.-H., Thomson R. (1983), Double slip plane crack model, Acta met., 31, No 4, 473-482.