Antiplane Deformation of a Bimaterial Containing an Interfacial Crack with the Account of Friction I. Single Loading

Sulym, Heorhiy; Piskozub, Lyubov; Piskozub, Yosyf; Pasternak, Iaroslav

doi:10.1515/ama-2015-0020

Abstract

The paper presents the exact analytic solution to the antiplane problem for a non-homogeneous bimaterial medium containing closed interfacial cracks, which faces can move relatively to each other with dry friction. The medium is subjected to the action of normal and arbitrary single loading in a longitudinal direction. Based on the discontinuity function method the problem is reduced to the solution of the system of singular integral-differential equations for stress and displacement discontinuities at the possible slippage zones. Influence of loading parameters and the effects of friction on the sizes of these zones is analyzed. The stress intensity factors, stress and displacement discontinuities, energy dissipation are determined for several characteristic types of external loading.

References

1. Antipov Yu.A. (1995), The crack in the line section of elastic media in the presence of dry friction (in russian), Prikl. matematika i mehanika, 59, Vyp. 2, 290-306.
Search in Google Scholar
2. Aravas N., Sharma S.M. (1991), An elastoplastic analysis of the interface crack with contact zones, J. Mech. Phys. Solids, 39, 311-344.10.1016/0022-5096(91)90016-H
Search in Google Scholar
3. Arhipenko K.M., Kriviy O.F. (2008), Interfacial beam at different types of contact interaction with inhomogeneous anisotropic plane (in ukrainian), Mashinoznavstvo, 8, No 3 (129), 16-21.
Search in Google Scholar
4. Bogdanovich P.N., Tkachuk D.V. (2009), Thermal and thermo-mechanical effects in sliding contact (in russian), Treniye i iznos, 30, No 3, 214-229.10.3103/S1068366609030015
Search in Google Scholar
5. Brussat T.R., Westmann R.A. (1974), Interfacial slip around rigid fiber inclusion, Journal of Composite Materials, 8, No. 4, 364-377.
Search in Google Scholar
6. Cherepanov G.P. (1966), On the development of cracks in compressed bodies (in russian), Prikladnaya matematika i mehanika, 30, No 1, 82-93.10.1016/0021-8928(66)90060-8
Search in Google Scholar
7. Comninou M. (1977), The interface crack, J. Appl. Mech., 44, 631-636.
Search in Google Scholar
8. Comninou M., Schmueser D. and Dundurs J. (1980), Frictional slip between a layer and a substrate caused by a normal load, Int. J. Engn. Sci., 18, 131-137.
Search in Google Scholar
9. Datsyshyn O.P., Kadyra V.M. (2006), A fracture mechanics approach to prediction of pitting under fretting fatigue conditions, Int. J. of Fatigue, 28, No 4, 375-385.10.1016/j.ijfatigue.2005.07.019
Search in Google Scholar
10. Evtushenko A.A., Sulim G.T. (1981), Stress concentration near a cavity filled with a liquid, Soviet Materials Science, 16, No. 6, 546-549.
Search in Google Scholar
11. Goryacheva I.G. (2001), Mechanics of frictional interaction (in russian), Moskva, Nauka.
Search in Google Scholar
12. Goryacheva I.G., Rajeev P.T. and Farris T.N. (2001), Wear in partial slip contact, J. Tribology, 123, 848-856.10.1115/1.1338476
Search in Google Scholar
13. Herrmann K.P., Loboda V.V. (1999), On interface crack models with contact zones situated in an anisotropic biomaterial, Archive of App. Mech., 69, 317-335.
Search in Google Scholar
14. Hills D.A, Nowell D. and Sackfield A. (1993), Mechanics of elastic contact, Butterworth-Heinemann, Oxford.
Search in Google Scholar
15. Johnson K.L. (1985), Contact mechanics, Cambridge: Cambridge University press.
Search in Google Scholar
16. Kharun I.V., Loboda V.V. (2003), A set of interface cracks with contact zones in combined tension-shear field, ActaMechanica, 166, 43-56.10.1007/s00707-003-0044-3
Search in Google Scholar
17. Kit G.S., Martynyak R.M. and Machishyn I.M. (2003), The effect of fluid in the contact gap on the stress state of conjugate bodies, Ibid, 39, No 3, 292-299.10.1023/A:1024414302961
Search in Google Scholar
18. Kundrat M.M., Sulym H.T. (2003), Prefracture zones in the composition of high-modulus elastic inclusion with symmetric and antisymmetric load (in ukrainian), Matematychni problem mehaniky neodnoridnyh struktur, Lviv, 322-324.
Search in Google Scholar
19. Loboda V.V., Kharun I.V. (2001), Plane Problem of a Crack on the Interface of Orthotropic Plates with Friction of Crack Lips, Materials Science, 37, Issue 5, 735-745.10.1023/A:1015040324502
Search in Google Scholar
20. Malanchuk N. et al. (2007), Local sliding of bodies surface inhomogeneities caused by the actions of power and heat loads (in ukrainian), Mashinoznavstvo, No 7, 15-20.
Search in Google Scholar
21. Martynyak R.M., Kryshtafovych A. (2000), Friction contact of two elastic half-planes with local recesses in boundary, J. Friction and Wear, 21, No 4, 6-15.
Search in Google Scholar
22. Martynyak R.M. et al. (2005), Elastic interaction of two half-planes shear in the local area borders on contact gap (in ukrainian), Mat. Metody ta fiz.-meh. polya, 48, No 3, 101-109.
Search in Google Scholar
23. Ostryk V.I., Ulitko A.F. (2006), Wiener-Hopf method to contact problems of theory of elasticity (in russian), Kiev, Naukova dumka.
Search in Google Scholar
24. Panasyuk V.V. et al. (1976), Distribution tense neighborhood of cracks in the plates and shells (in russian), Kiev, Naukova dumka.
Search in Google Scholar
25. Pasternak Ya.M., Sulym H.T., Piskozub L.G. (2010), Models of thin inclusion with the account of imperfect contact with the medium (in russian), Proc. of VI International symposium on Tribo-Fatigue MSTF 2010 (Minsk, 25 oct. - 1 nov. 2010) in 2 parts, part 2., Minsk, BGU, 399-404.
Search in Google Scholar
26. Piskozub J.Z., Sulim G.T. (2008), Thermoelastic equilibrium of piecewise homogeneous solids with thin inclusions, Journal of Engineering Mathematics. Special Issue Thermomechanics, 61, 315-337.
Search in Google Scholar
27. Popov G.Ya. (1966), Plane contact problem of the theory of elasticity with the forces of adhesion and friction (in russian), Prikladnaya matematika i mehanika, 30, No 3, 551-563.10.1016/0021-8928(67)90102-5
Search in Google Scholar
28. Pyriev S.Yu. et al. (2012), Thermomechanical wear during quasi-stationary frictional heating (in russian), Treniye i iznos, 33, No 5, 435-443.10.3103/S106836661205011X
Search in Google Scholar
29. Schmueser D., Comninou M., Dundurs J. (1980), Separation and slip between a layer and substrate caused by a tensile load, Ibid, 18, 1149-1155.10.1016/0020-7225(80)90115-9
Search in Google Scholar
30. Sekine H.(1982), Mechanics of debonding along the surfaces of dispersed flat inclusions in composite materials (A model of debonding along the surface of a flat inclusion), Trans. ASME. Journal of Applied Mechanics, 48A, No. 11 (435), 1415-1420.10.1299/kikaia.48.1415
Search in Google Scholar
31. Sulym H.T. (2007), Fundamentals of the mathematical theory of thermoelastic equilibrium of deformable bodies with thin inclusions (in ukrainian), Lviv, Doslidno-vydavnychyy tsentr NTSh.
Search in Google Scholar
32. Sulym H.T., Piskozub Y.Z. (2004), Conditions of contact interaction (review) (in ukrainian), Mat. metody i fiz.-meh. polya, 47, No 3, 110-125.
Search in Google Scholar
33. Ulitko A.F., Ostrik V.I. (2002), Interfacial crack subjected to frictional contact (in ukrainian), Visnyk Kyiv. un-tu., Ser. fiz.-mat. nauky, 2, 133-141.
Search in Google Scholar
34. Weertman J., Lin I.-H., Thomson R. (1983), Double slip plane crack model, Acta met., 31, No 4, 473-482.
Search in Google Scholar

Antiplane Deformation of a Bimaterial Containing an Interfacial Crack with the Account of Friction I. Single Loading

Abstract

Paradigm

My account