References
- 1. Bieniaś J., Surowska B., Stoch A., Matraszek H., Walczak M.: The influence of SiO2 and SiO2-TiO2 intermediate coatings on bond strength of titanium and Ti6Al4V alloy to dental porcelain. Dental Materials 25 (2009) 1128-1135.
- 2. Geetha M., Singh A.K., Asokamani R., Gogia A.K. Ti based biomaterials, the ultimate choice for orthopaedic implants - A review. Progress in Materials Science 54 (2009) 397-425.
- 3. Bartmański M.: Properties of nanosilver – doped nanohydroxyapatite coating on the Ti13Zr13Nb alloy. Advances in Materials Science 17 (2017) 18-28.
- 4. Jażdżewska M., Majkowska – Marzec B.: Hydroxyapatite depositionon the laser modified Ti13Nb13Zr alloy. Advances in Materials Science 17 (2017) 5-13.
- 5. Jelliti S., Richard C., Retraint D., Roland T., Chemkhi M., Demangel C.: Effect of surface nanocrystallization on the corrosion behavior of Ti–6Al–4V titanium alloy. Surface & Coatings Technology 224 (2013) 82-87.
- 6. Walczak M., Drozd K.: Tribological characteristics of dental metal biomaterials. Current Issues in Pharmacy and medical Sciences, Annales Universitatis Mariae Curie-Sklodowska Pharmacia, Sectio DDD 29 (2016) 158-162.
- 7. Hosoki M., Keisuke N., Youji M., Go O., Yoshizo M.: Allergic contact dermatitis caused by titanium screws and dental implants. Journal of Prosthodontics Research 60 (2016) 213-219.
- 8. Haruna W.S.W., Manam N.S., Kamariah M.S.I.N., Sharif S., Zulkifly A.H., Ahmad I., Miura H.: A review of powdered additive manufacturing techniques for Ti-6Al-4V biomedical applications. Powder Technology 331 (2018) 74-97.
- 9. Benedetti M., Torresani E., Leoni M., Fontanari V., Bandini M., Pederzolli C., Potrich C.: The effect of post-sintering treatments on the fatigue and biological behavior of Ti-6Al-4V ELI parts (2017) 295-306.
- 10. Ahmed A.A., Mhaede M., Wollmann M., Wagner L.: Effect of micro shot peening on the mechanical properties and corrosion behavior of two microstructure Ti–6Al–4V alloy. Applied Surface Science 363 (2016) 50-58.
- 11. Fydrych D., Łabanowski J., Tomków J., Rogalski G.: Cold cracking of underwater wet welded S355G10+N high strength steel. Advances in Materials Science 15 (2015) 48-56
- 12. Vališ D., Koucky M., Zak L.: On approaches for non-direct determination of system deterioration, Eksploatacja i Niezawodnosc – Maintenance and Reliability 14 (2012) 33-41.
- 13. Saji V.S., Choe H.Ch.: Electrochemical behavior of Co-Cr and Ni-Cr dental cast alloys. Transactions of Nonferrous Metals Society of China 19 (2009) 785-790.
- 14. Saji V.S., Choe H.Ch.: Preferential dissolution behaviour in Ni–Cr dental cast alloy. Bulletin of Materials Science 33 (2010) 463-468
- 15. Yadroitsev I. Gusarov A, Yadroitsava I, Smurov I. Single track formation in selective laser melting of metal powders. Journal of Materials Processing Technology 210 (2010) 1624-1631.
- 16. Thijs L., Kempen K., Kruth J.-P., Van Humbeeck J.: Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder. Acta Materialia 61 (2013) 1809-1819.
- 17. Yadroitsev I., Krakhmalev P., Yadroitsava I.: Hierarchical design principles of selective laser melting for high quality metallic objects. Additive Manufacturing 7 (2015) 45-56.
- 18. Ganesh B.K.C., Sha W., Ramanaiah N., Krishnaiah A.: Effect of shotpeening on sliding wear and tensile behavior of titanium implant alloys. Materials and Design 56 (2014) 480-486.
- 19. Lee H., Kim D., Jung J., Pyoun Y.: Shin K., Influence of peening on the corrosion properties of AISI 304 stainless steel. Corrosion Science 51 (2009) 2826–2830.