Temporary Stability of Compressive Strength of Flow and Universal Type LC PMCCS Materials

Walczak, A.; Niewczas, A.; Pieniak, D.; Gil, L.; Kozłowski, E.; Kordos, P.

doi:10.1515/adms-2017-0038

Abstract

This paper reports the results of compressive strength and elasticity studies of light-cured polymer matrix ceramic composites (LC PMCCs). The main purpose was to obtain new data on experimental composites and compare them with commercial composites from the world’s leading manufacturer. The objective was to investigate the relationship between the content of reinforcing components in the composites studied and the stability of their strength in time, expressed as the number of fatigue thermal cycles.

References

1. Shalaby S.W., Salz U.: Polymers for dental and orthopedic applications. CRC Press, Boca Raton 2007.10.1201/9781420003376
Search in Google Scholar Back to article
2. Rodrigues Junior S.A., Ferracane J.L., Bona A.D.: Flexural strength and Weibull analysis of a microhybrid and a nanofill composite evaluated by 3- and 4-point bending tests. Dental Materials 24 (2008), 426-431.
Search in Google Scholar Back to article
3. Bechtold J., dos Santos P.J., Anido-Anido A., di Hipolito V., Alonso R.C.B., D’Alpino P.H.P.: Hardness, polymerization depth, and internal adaptation of Class II silorane composite restorations as a function of polymerization protocol. European Journal of Densitry 6 (2012), 133-140.
Search in Google Scholar Back to article
4. Walczak A., Pieniak D., Niewczas A., Niewczas A.M., Kordos P.: Study of ceramic-polymer composites reliability based on the bending strength test. Journal of KONBiN, 35 (2015), 169-178.
Search in Google Scholar Back to article
5. Pieniak D., Niewczas A.M.: Phenomenological evaluation of fatigue cracking of dental restorations under conditions of cyclic mechanical loads. Acta of Bioengineering and Biomechanics 14 (2012), 9-17.
Search in Google Scholar Back to article
6. Ivanisevic A., Lainovic T., Blazic L., Vilotic M.: Influence of light-curing mode on the mechanical properties of dental resin nanocomposites. 24th DAAAM International Symposium on Intelligence Manufacturing and Automation, 2013, Procedia Engineering 69 (2014), 921-930.10.1016/j.proeng.2014.03.071
Search in Google Scholar Back to article
7. Eftekhari M, Fatemi A.: On the strengthening effect of increasing cycling frequency on fatigue behavior of some polymers and their composites: Experiments and modeling. International Journal of Fatigue 87 (2016), 153–166.
Search in Google Scholar Back to article
8. Musanje L., Darvell B.: Effects of strain rate and temperature on the mechanical properties of resin composites. Dental Materials 20 (2004), 750–765.
Search in Google Scholar Back to article
9. Stewardson D.A., Shortall A.C., Marquis P.M.: The effect of clinically relevant thermocycling on the flexural properties of endodontic post materials. Journal of Dentistry 38 (2010), 437–442.
Search in Google Scholar Back to article
10. Leibrock H., Degenhart M., Behr M., Rosentritt M., Handel G.: In vitro study on the effect of thermo- and load-cycling on the bond strength of porcelain repair systems. Journal of Oral Rehabilitation 26 (1999), 130–7.
Search in Google Scholar Back to article
11. Arsecularatne J.A., Chung N.R.: An in vitro study of the wear behaviour of dental composites. Biosurface nad Biotribology, 3 (2016), 102-113.
Search in Google Scholar Back to article
12. Niewczas A., Pieniak D., Bachanek T., Surowska B., Bieniaś J., Pałka K.: Prognosing of functional degradation of bio-mechanical systems exemplified by the tooth-composite filling system, Eksploatacja i Niezawodnosc – Maintenance and Reliability 1 (2010), 23-34.
Search in Google Scholar Back to article
13. Kordos P., Hunicz J., Niewczas A.: The station designed for accelerated fatigue tests of dental materials. Maintenance and Reliability 1 (2009), 63-69.
Search in Google Scholar Back to article
14. Pieniak D., Niewczas A., Kordos P.: Influence of thermal fatigue and ageing on the microhardness of polymer-ceramic composites for bio-medical applications. Eksploatacja i Niezawodnosc – Maintenance and Reliability 2 (2012), 181–188.
Search in Google Scholar Back to article
15. Ferracane J.L., Palin W.M.: Effects of particulate filler systems on the properties and performance of dental polymer composites. In Vallittu P. editor, Non - Metallic Biomaterials for Tooth Repair and Replacement, Woodhead Publishing, Cambridge 2012.10.1533/9780857096432.3.294
Search in Google Scholar Back to article
16. Lohbauer U., Belli R., Ferracane J.L.: Factors involved in mechanical fatigue degradation of dental resin composites. Journal of Dental Research 92 (2013), 584-91.
Search in Google Scholar Back to article
17. Randolph L.D., Palin W.M., Gaetane L., Leprince J.G.: Filler characteristics of modern dental resin composites and their influence on physico-mechanical properties. Dental Materials 32 (2016), 1586–1599.
Search in Google Scholar Back to article
18. Hambire U.V., Tripathi V.K.: Optimization of compressive strength of zirconia based dental composites. Bulletin of Materials Science 37 (2014), 1315-1320.
Search in Google Scholar Back to article
19. Hosseinalipour M., Javadpour J., Rezaie H., Dadras T., Hayati A.N.: Investigation of mechanical properties of experimental Bis-GMA/TEGDMA dental composite resins containing various mass fractions of silica nanoparticles. Journal of Prosthodontics 19 (2010), 112-117.
Search in Google Scholar Back to article
20. Tanimoto Y., Hirayama S., Yamaguchi M., Nishiwaki T.: Static and dynamic moduli of posterior dental resin composites under compressive loading. Journal of the Mechanical Behavior of Biomedical Materials 7 (2011), 1531-1539.
Search in Google Scholar Back to article
21. Beun S., Glorieux T., Devaux J., Vreven J., Leloup G.: Characterization of nanofilled compared to universal and microfilled composites. Dental Materials 23 (2007), 51-59.
Search in Google Scholar Back to article
22. Antunes P.V., Ramalho A., Carrilho E.V.P.: Mechanical and wear behaviours of nano and microfilled polymeric composite: effect of filler fraction and size. Materials & Design 61 (2014), 50–60.
Search in Google Scholar Back to article
23. Hahnel S., Dowling A.H., El-Safty S., Fleming G.J.: The influence of monomeric resin and filler characteristic on the performance of experimental resin-based composites (RBCs) derived from a commercial formulation. Dental Materials 28 (2012), 416-423.
Search in Google Scholar Back to article
24. Drummond J.L.: Degradation, fatigue and failure of resin dental composite materials. Journal of Dental Research, 87 (2008), 710-719.
Search in Google Scholar Back to article
25. Souza, R. O., Ozcan M., Michida S.M., de Melo R. M., Pavanelli C. A., Bottino M. A., Soares L. E., Martin A. A.: Conversion degree of indirect resin composites and effect of thermocycling o their physical properties. Journal of Prosthodontics 19 (2010), 218-225.
Search in Google Scholar Back to article
26. Kawakami Y., Takeshige F., Hayashi M., Ebisu S.: Fatigue of tooth-colored restoratives in aqueous environment. Dental Materials Journal 26 (2007), 1-6.
Search in Google Scholar Back to article
27. Janda R., Roulet J.F., Latta M., Ruttermann S.: Water sorption and solubility of contemporary resin-based filling materials. Journal of Biomedical Materials Research Part B: Applied Biomaterials 82 (2007), 545-551.10.1002/jbm.b.3076017285606
Search in Google Scholar Back to article
28. Ferracane JL: Hygroscopic and hydrolytic effects in dental polymer networks. Dental Materials 22 (2006), 211-222.10.1016/j.dental.2005.05.00516087225
Search in Google Scholar Back to article
29. Finer Y., Santerre J.P.: The influence of resin chemistry on a dental composite’s biodegradation. Journal of Biomedical Materials Research: Part A 69 (2004), 233-246.
Search in Google Scholar Back to article
30. Yu B., Liu D., Liu F., He J.: Preparation and characterization of light-cured dental resin without methacrylate monomers derived from Bisphenol A. Advances in Polymer Technology 33 (2014), 21417.10.1002/adv.21417
Search in Google Scholar Back to article

Temporary Stability of Compressive Strength of Flow and Universal Type LC PMCCS Materials

Abstract

Paradigm

My account