References
- 1. Bolewski Ł., Szkodo M., Kmieć M., Cavitation erosion degradation of Belzona® coatings, Advances in Materials Science, 17(1) (2017), DOI: 10.1515/adms-2017-0002.10.1515/adms-2017-0002
- 2. Krella A., Cavitation degradation model of hard thin PVD coatings, Advances in Materials Science, 10(3) (2010) 27–36, DOI: 10.2478/v10077-010-0010-4.10.2478/v10077-010-0010-4
- 3. Amann T., Waidele M., Kailer A., Analysis of mechanical and chemical mechanisms on cavitation erosioncorrosion of steels in salt water using electrochemical methods, Tribology International, 124 (2018) 238-246, DOI: 10.1016/j.triboint.2018.04.01210.1016/j.triboint.2018.04.012
- 4. Waliszyn A.: Methods to avoid surface damage of metal construction due to corrosion in engine cooling systems. [In] Implications in Production Processes. Institute of Examinations and Scientific Studies, Gorzów Wlkp., (2016) 68-80 (in Polish).
- 5. Valishin A. G., Matviejevskij O. O.: Modeling cavitation – erosive stability of dumping materials and coats. Problems of machine construction and reliability of machines, No 3, Moskva, (2008), 43-50 (in Russian).
- 6. Kwok C. T., Man H. C., Cheng F. T.: Cavitation erosion and damage mechanisms of alloys with duplex structures. Materials Science and Engineering, A242 (1998) 108-120.
- 7. Steller J., Krella A., Koronowicz J., Janicki W.: Towards quantitative assessment of material resistance to cavitation erosion. Wear, 258 (2005) 604–613.
- 8. Heathcock C.J., Protheroe B.E., Ball A.: Cavitation erosion of stainless steels. Wear, 81(2) (1982) 311-327.
- 9. Kim J H, Lee M H., A Study on Cavitation Erosion and Corrosion Behavior of Al-, Zn-, Cu-, and Fe-Based Coatings Prepared by Arc Spraying, Journal Of Thermal Spray Technology, 19 (6) (2010) 1224-1230, DOI: 10.1007/s11666-010-9521-0.10.1007/s11666-010-9521-0
- 10. Yang D., Yu A., Ji B., Zhou, J., Luo X., Numerical analyses of ventilated cavitation over a 2-D NACA0015 hydrofoil using two turbulence modeling methods, Journal Of Hydrodynamics, 30(2) (2018) 345-356, DOI: 10.1007/s42241-018-0032-7.10.1007/s42241-018-0032-7
- 11. Krumenacker, L., Fortes-Patella, R., Archer, A., Numerical estimation of cavitation intensity, IOP Conference Series-Earth and Environmental Science, 22 (2014) Article Number: UNSP 052014, DOI: 10.1088/1755-1315/22/5/052014.10.1088/1755-1315/22/5/052014
- 12. Pogodaev L.I., Kuzmin A. A.: Erosion of materials in ship technology in uniform liquid and gasous environments. Monograph, Sankt-Petersburg, (2004) 379 (in Russian).
- 13. Ciubotariu, CR., Secosan E., Marginean, G., Frunzaverde D., Campian V. C., Experimental study regarding the cavitation and corrosion resistance of stellite 6 and self-fluxing remelted coatings, Strojniski Vestnik-Journal of Mechanical Engineering, 62 (3) (2016) 154-162, DOI: 10.5545/sv-jme.2015.2663.10.5545/sv-jme.2015.2663
- 14. Kumar, H., Chittosiya, C., Shukla, V.N., HVOF sprayed WC based cermet coating for mitigation of cavitation, erosion & abrasion in hydro turbine blade, Materials Today-Proceedings, 5 (2) (2018) 6413-6420.10.1016/j.matpr.2017.12.253
- 15. Yu A., Luo X., Ji B., Analysis of ventilated cavitation around a cylinder vehicle with nature cavitation using a new simulation method, Science Bulletin, 60(21) (2015) 1833-1839, DOI: 10.1007/s11434-015-0916-7.10.1007/s11434-015-0916-7