Cavitation Erosion – Phenomenon and Test Rigs

A. K. Krella; D. E. Zakrzewska

doi:10.1515/adms-2017-0028

.blurhash-client-img { display: none !important; }

Cavitation Erosion – Phenomenon and Test Rigs

Advances in Materials Science

Volume 18 (2018): Issue 2 (June 2018)

By: A. K. Krella and D. E. Zakrzewska

Open Access

|Jul 2018

Abstract

The cavitation and cavitation erosion phenomenon have been shortly presented. The main four types of test rigs to investigate the cavitation erosion resistance have been shown. Each type of test design is described and an example of a design is shown. A special attention has been payed to the designs described in the International ASTM Standards: a vibratory design and a cavitating jet cell. There was shown that the design of a test device and the test conditions affect the resistance to cavitation erosion of a material.

References

1. Karimi A., Martin J.L.: Cavitation erosion of materials. International Metals Reviews 31 (1986), pp. 1-26.
Search in Google Scholar Back to article
2. Hubballi V., Sondur V.: A Review on the prediction of cavitation erosion inception in hydraulic control Valves. International Journal of Emerging Technology and Advanced Engineering 3 (2013), 110-119.
Search in Google Scholar Back to article
3. Bourne N.K.: On impacting liquid jets and drops onto polymethylmethacrylate targets, Proc. R. Soc. A (2005) 461, 1129–114510.1098/rspa.2004.1440
Search in Google Scholar Back to article
4. Kuiper G.: Cavitation research and ship propeller design, Applied Scientific Research (1998) 58, 33–50.10.1007/978-94-011-4986-0_3
Search in Google Scholar Back to article
5. Dular M., Stoffel B., Sirok B., Development of a cavitation erosion model. Wear 261 (2006) 642-655.
Search in Google Scholar Back to article
6. Brennen Ch.E.: Cavitation and bubble Dynamics. Oxford University Press, New York, 1977.
Search in Google Scholar Back to article
7. Śniegocka B., Szkodo M., Chmiel J.: Influence of spatial structures of 316L stainless steel on its cavitation resistance. Solid State Phenomena 225 (2015) 109-114.
Search in Google Scholar Back to article
8. Wójs K.: Kawitacja w cieczach o różnych właściwościach reologicznych. A. Kaczak [ed.], Oficyna Wydawnicza Politechniki Wrocławskiej, Wrocław, 2004. (in Polish)
Search in Google Scholar Back to article
9. Knapp R. T., Daily J. W., Hammit F.G.: Cavitation, McGraw-Hill, New York 1970.
Search in Google Scholar Back to article
10. Lauterborn W., Bolle H.: Experimental investigations of cavitation-bubble collapse in the neighbourhood of a solid boundary. J. Fluid Mech. 72, part 2 (1975) 391-399.
Search in Google Scholar Back to article
11. Lindau O., Lauterborn W.: Cinematographic observation of the collapse and rebound of a laser-produced cavitation bubble near a wall, J. Fluid Mech. (2003), vol. 479 327–348.
Search in Google Scholar Back to article
12. Philipp, A., Lauterborn, W.: Cavitation erosion by single laser-produced bubbles. J. Fluid Mech. 361 (1998) 75–116.
Search in Google Scholar Back to article
13. Kim K., Chahine G. L., Franc J.-P., Karimi A.: Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction. Kim K., Chahine G. L., Franc J.-P., Karimi A. [eds], Springer International Publishing, Dordrecht, 2014.10.1007/978-94-017-8539-6
Search in Google Scholar Back to article
14. Laterborn W.: Cavitation and Coherent Optics, 1980, Proc. Of the 1^st. International Cnference, Göttingen, Fed. Rep. Of Germany, 1979, 3-12.10.1007/978-3-642-51070-0_1
Search in Google Scholar Back to article
15. Steller J., Gireń G.: International Cavitation Erosion Test. Final report. Zeszty Naukowe IMP PAN, Gdańsk, 2015.
Search in Google Scholar Back to article
16. Jasionowski R.: Badania odporności materiałów na erozję kawitacyjną, Cz. I Stanowiska badawcze. Zeszyty Naukowe WSM Szczecin nr 72, Szczecin 2003. (in Polish)
Search in Google Scholar Back to article
17. Kmieć M., Karpiński B., Szkodo M.: Cavitation erosion of P110 steel in different drilling muds. Advances in Materials Science 16 (2016) 57-66.
Search in Google Scholar Back to article
18. Li Z., Han J., Lu J., Zhou J., Chen J.: Vibratory cavitation erosion behavior of AISI 304 stainless steel in water at elevated temperatures. Wear 321 (2014) 33-37.
Search in Google Scholar Back to article
19. Mitelea I., Bordeasu I., Pelle M., Craciunescu C.: Ultrasonic cavitation erosion of nodular cast iron with ferrite-pearlite microstructure. Ultrasonics Sonochemistry 23 (2015) 385-390.
Search in Google Scholar Back to article
20. Niederhofer P., Huth S.: Cavitation erosion resistance of high intersitial CrMnCN austenitic stainless steel. Wear 301 (2013) 457-466.
Search in Google Scholar Back to article
21. Kim S-J., Lee S-J., Chong S-O.: Electrochemical characteristics under cavitation-erosion for STS 316L in seawater. Materials Research Bulletin 58 (2014) 244-247
Search in Google Scholar Back to article
22. Wu J-h., Wang Y., Ma F., Gou W-j. Cavitation erosion in bloods. Journal of Hydrodynamics, Ser. B, 29 (2017) 724-727.
Search in Google Scholar Back to article
23. Gottardi G., Tocci M., Montesano L., Pola A.: Cavitation erosion behaviour of an innovative aluminium alloy for Hybrid Aluminium Forging, Wear 394–395 (2018) 1-10.
Search in Google Scholar Back to article
24. Hu H.X., Zheng Y.G.: The effect of sand particle concentrations on the vibratory cavitation erosion. Wear 384–385 (2017) 95-105.
Search in Google Scholar Back to article
25. Momma T.: Cavitation Loading and Erosion Produced by a Cavitating Jet. PhD thesis, Nottingham, 1991.
Search in Google Scholar Back to article
26. Lichtarowicz, A. and Sakkejha, F., “Cutting with Cavitating Jets,” Paper G6, Proc. 1st Int. Symp. Jet Cutting Tech., BHRA, Coventry, UK, April 1972
Search in Google Scholar Back to article
27. Hutli E., Nedeljkovic M.S., Radovic N.A., Bonyár A., The relation between the high speed submerged cavitating jet behaviour and the cavitation erosion process, International Journal of Multiphase Flow 83 (2016) 27–38.10.1016/j.ijmultiphaseflow.2016.03.005
Search in Google Scholar Back to article
28. Lipej A.: Cavitation and dynamic problems. S. Muhic (ed), 6th IAHR meeting of the Working Group, IAHRWG 2015, Slovenia, September 9-11, 2015.
Search in Google Scholar Back to article
29. Thapa B., Chaudhary P., Dahlhaug O., Upadhyay P.: Study of combined effect of sand erosion and cavitation in hydraulic turbines. Proc. International Conference on Small Hydropower, Sri Lanka, 2007, 22-24.
Search in Google Scholar Back to article
30. Hutli E. A. F., Nedeljković M.S.: Investigation of a Submerged Cavitation Jet Behaviour: Part One-The Phenomenon, Detection Technique and Sono-Luminescence. FME Transactions vol. 35 (2007) 113-119.
Search in Google Scholar Back to article
31. Hutli E. A. F., Nedeljković M.S.: Investigation of a Submerged Cavitation Jet Behaviour: Part Two – Influences of operating conditiond, geometrical parameters and arrangements of detection system. FME Transactions vol. 35 (2007) 121-128.
Search in Google Scholar Back to article
32. Soyama H.: Effect of nozzle geometry on a standard cavitation erosion test using a cavitating jet, Wear 297 (2013) 895–902
Search in Google Scholar Back to article
33. Peng Ch., Tian S., Li G.: Joint experiments of cavitation jet: High-speed visualization and erosion test. Ocean Engineering 149 (2018) 1-13.
Search in Google Scholar Back to article
34. Steller J.: International Cavitation Erosion Test and quantitative assessment of material resistance to cavitation. Wear 233–235 (1999) 51 – 64.
Search in Google Scholar Back to article
35. Veerabhadra R., Syamala Rao B., Buckley D.H.: Size scale effect in cavitation erosion. Proc. Cavitation and Multiphase Flow Forum, Louisiana, 1984, 11-17.
Search in Google Scholar Back to article
36. Dular M., Petkovšek M., On the mechanisms of cavitation erosion – Coupling high speed videos to damage patterns, Experimental Thermal and Fluid Science 68 (2015) 359-370.10.1016/j.expthermflusci.2015.06.001
Search in Google Scholar Back to article
37. He J., Hammitt F. G.: Comparision of cavitation erosion test results from venturi and vibratory facilities. Wear vol. 76 (1982) 269–292.
Search in Google Scholar Back to article
38. Krella A.: The experimental resistance parameter for TiN coating to cavitation action. Advances in Materials Science 10 (23) (2010) 4-18
Search in Google Scholar Back to article
39. Dular M., Stoffel B., Širok B.: Development of a cavitation erosion model. Wear 261 (2006) 42-655.
Search in Google Scholar Back to article
40. Hart D., Whale D.: A review of cavitation-erosion resistance weld surfacing alloys for hydroturbines. Eutectic Cast. Pty. Ltd. (2007) 15-30.
Search in Google Scholar Back to article
41. Mann B.S.: Boronizing of cast martensitic chromium nickel stainless steel and its abrasion and cavitation-erosion behavior. Wear v.208 (1997), 125-131.10.1016/S0043-1648(96)07374-7
Search in Google Scholar Back to article
42. Bazanini G., Bressan J. D., Klems M.A.: Cavitation erosion wear of metallic specimens using the new compact rotating disk device. Thermal Engineering Vol. 7 (2008), 31-36.
Search in Google Scholar Back to article
43. Rashed M.K., Abdulbari H.A., Salled M.A., Ismail M.H.: Rotating disc apparatus: types, developments and future applications. Modern Applied Science 10 (2016) 198-229.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.1515/adms-2017-0028 | Journal eISSN: 2083-4799 | Journal ISSN: 1730-2439

Journal RSS Feed

Language: English

Page range: 15 - 26

Published on: Jul 28, 2018

Published by: Gdansk University of Technology

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

Related subjects:

Functional and smart materials

© 2018 A. K. Krella, D. E. Zakrzewska, published by Gdansk University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 18 (2018): Issue 2 (June 2018)