Polyamide 1010/Polythioamide Blend Reinforced with Graphene Nanoplatelet for Automotive Part Application

Kausar, A.

doi:10.1515/adms-2017-0013

Abstract

Novel polythioamide (PTA) was prepared and blended with polyamide 1010 (PA1010). Based on morphology, molecular weight, polydispersity index, thermal, and shear stress behavior, PA1010/PTA (90:10) blend was opted as matrix for graphene nanoplatelet (GNP) reinforcement. Inclusion of functional GNP resulted in crumpled gyroid morphology. T₀ (502°C) of PA1010/PTA/GNP was increased by 145°C than unfilled blend (357°C). Limiting oxygen index measurement indicated better non-flammability of PA1010/PTA/GNP1-3 nanocomposites (53-55%) relative to PA1010/PTA1-3 (41-48%). PA1010/PTA/GNP1-3 also attained V-0 rating in UL94. Furthermore, PA1010/PTA/GNP3 nanocomposite revealed optimum tensile strength (40 MPa), impact strength (1.9 MPa), and flexural modulus (1373 MPa) to manufacture automotive part.

References

1. Jia Y., He H., Peng X., Meng S., Chen J., Geng, Y., Preparation of a new filament based on polyamide-6 for three-dimensional printing. Polym. Engineer. Sci. (2017) DOI,10.1002/pen.24515.10.1002/pen.24515
Search in Google Scholar Back to article
2. Kausar A., Polycarbonate/Polypropylene-Graft-Maleic Anhydride and Nano-Zeolite-Based Nanocomposite Membrane, Mechanical and Gas Separation Performance. Adv. Mater. Sci. 16 (2016)17-28.10.1515/adms-2016-0019
Search in Google Scholar Back to article
3. Kausar A., Ullah W., Muhammad B., Siddiq, M., Novel mechanically stable, heat resistant and nonflammable functionalized polystyrene/expanded graphite nanocomposites, Adv. Mater. Sci. 14 (2014) 61-74.10.2478/adms-2014-0022
Search in Google Scholar Back to article
4. Kausar A., Mechanical, thermal, and electrical properties of epoxy matrix composites reinforced with polyamide-grafted-MWCNT/poly (azo-pyridine-benzophenone-imide)/polyaniline nanofibers. Int. J. Polym. Mater. Polym. Biomater. 63 (2014) 831-839.10.1080/00914037.2014.886220
Search in Google Scholar Back to article
5. Katunin A., Krukiewicz K., Herega A., Catalanotti, G., Concept of a conducting composite material for lightning strike protection. Adv. Mater. Sci. 16 (2016) 32-46.10.1515/adms-2016-0007
Search in Google Scholar Back to article
6. Budzik M., Pilawka R., Imielińska K., Jumel J., Shanahan M., Fracture of Aluminium Joints Bonded with Epoxy Adhesive Reinforced by MMT Nanoparticles. Adv. Mater. Sci. 9 (2009) 4-11.10.2478/v10077-009-0006-0
Search in Google Scholar Back to article
7. Zhang S.L., Wang G.B., Jiang Z.H., Wang D., Ma R.T., Wu Z.W., Impact properties, phase structure, compatibility, and fracture morphology of polyamide-1010/thermoplastic poly (ester urethane) elastomer blends. J. Polym. Sci. B, Polym. Phys. 43 (2005) 1177-1185.10.1002/polb.20410
Search in Google Scholar Back to article
8. Kausar A., Effect of nanofiller dispersion on morphology, mechanical and conducting properties of electroactive shape memory Poly (urethane-urea)/functional nanodiamond composite, Adv. Mater. Sci. 15 (2015) 14-28.10.1515/adms-2015-0019
Search in Google Scholar Back to article
9. Kausar A., Mechanical and Thermal Properties of Polyamide 1010 Composites Filled with Nanodiamond/Graphitized Carbon Black Nanoparticles. Am. J. Polym. Sci. Engineer. 3 (2015) 161-171.
Search in Google Scholar Back to article
10. Lu Z., Wu A., Ou X., Zhang S., Niu J., Ji S., Ling Y., Enhanced anti-aging and mechanical properties of polyamide 1010 by sol-hydrothermal synthetic titanium dioxide-coated kaolinite addition. J. Alloys Comp. 693 (2017) 381-388.10.1016/j.jallcom.2016.09.099
Search in Google Scholar Back to article
11. Li B., Zhang L., ESR approach to free radicals trapped in irradiated polyamide-1010. Rad. Phys. Chem. 49 (1997) 395-397.10.1016/S0969-806X(96)00145-4
Search in Google Scholar Back to article
12. Sangroniz L., Palacios JK., Fernández M., Eguiazabal JI., Santamaria A., Müller AJ., Linear and non-linear rheological behavior of polypropylene/polyamide blends modified with a compatibilizer agent and nanosilica and its relationship with the morphology. Eur. Polym. J. 83 (2016) 10-21.10.1016/j.eurpolymj.2016.07.026
Search in Google Scholar Back to article
13. Kausar A., Ur Rahman A., Functional Graphene Nanoplatelet Reinforced Epoxy Resin and Polystyrene-based Block Copolymer Nanocomposite. Full. Nanotub. Carb. Nanostruct. 24 (2016) 235-242.10.1080/1536383X.2016.1144592
Search in Google Scholar Back to article
14. Kulkarni, H., Tambe, P., Joshi, G., 2017. High concentration exfoliation of graphene in ethyl alcohol using block copolymer surfactant and its influence on properties of epoxy Nanocomposites. Full. Nanotub. Carb. Nanostruct. (2016) DOI,10.1080/1536383X.2017.1283616.10.1080/1536383X.2017.1283616
Search in Google Scholar Back to article
15. Wang F., Drzal LT., Qin Y., Huang Z., Enhancement of fracture toughness, mechanical and thermal properties of rubber/epoxy composites by incorporation of graphene nanoplatelets. Compos. Part A, Appl. Sci. Manufact. 87 (2016) 10-22.10.1016/j.compositesa.2016.04.009
Search in Google Scholar Back to article
16. Wang F., Drzal L.T., Qin Y., Huang Z., Mechanical properties and thermal conductivity of graphene nanoplatelet/epoxy composites. J. Mater. Sci, 50 (2015) 1082-1093.10.1007/s10853-014-8665-6
Search in Google Scholar Back to article
17. Ma PC., Siddiqui NA., Marom G., Kim JK., Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites, a review. Compos. Part A, Appl. Sci. Manufact, 41 (2010) 1345-1367.10.1016/j.compositesa.2010.07.003
Search in Google Scholar Back to article
18. Cui L.J., Wang YB., Xiu W.J., Wang W.Y., Xu LH., Xu X.B., Meng Y., Li LY., Gao J., Chen LT., Geng HZ., Effect of functionalization of multi-walled carbon nanotube on the curing behavior and mechanical property of multi-walled carbon nanotube/epoxy composites. Mater. Des. 49 (2013) 279-284.10.1016/j.matdes.2013.01.050
Search in Google Scholar Back to article
19. Anwar Z., Kausar A., Khan LA., Muhammad, B., Modified graphene nanoplatelet and epoxy/block copolymer-based nanocomposite, physical characteristic and EMI shielding studies. Nanocomposites, 2 (2016) 141-151.10.1080/20550324.2016.1236535
Search in Google Scholar Back to article
20. Paszkiewicz S., Szymczyk A., Livanov K., Wagner H.D., Roslaniec, Z., 2015. Enhanced thermal and mechanical properties of poly (trimethylene terephthalate-block-poly (tetramethylene oxide) segmented copolymer based hybrid nanocomposites prepared by in situ polymerization via synergy effect between SWCNTs and graphene nanoplatelets. Express Polym. Lett, 9 (2015) 509-524.10.3144/expresspolymlett.2015.49
Search in Google Scholar Back to article
21. Itsuno S., Takahashi, S., Inside Cover, Synthesis of Chiral Polyamides Containing an (R, R)-1,2-Diphenylethylenediamine Monosulfonamide Structure and Their Application to Asymmetric Transfer Hydrogenation Catalysis (ChemCatChem 3/2017). ChemCatChem, 9 (2017) 375-375.10.1002/cctc.201700122
Search in Google Scholar Back to article
22. Nishitani Y., Mukaida J., Yamanaka T., Kajiyama T., Kitano T., In Holzer CH, Payer M, editors. AIP Conference Proceedings, AIP Publishing, 1779 (2016) 060004.
Search in Google Scholar Back to article
23. Yan D., Zhang H.B., Jia Y., Hu J., Qi X.Y., Zhang Z., Yu, Z.Z., Improved electrical conductivity of polyamide 12/graphene nanocomposites with maleated polyethylene-octene rubber prepared by melt compounding. ACS Appl. Mater. Interface. 4 (2012) 4740-4745.10.1021/am301119b22889067
Search in Google Scholar Back to article
24. Yousef S., Visco A., Galtieri G., Nocita D., Espro C., Wear behaviour of UHMWPE reinforced by carbon nanofiller and paraffin oil for joint replacement. Mater. Sci. Engineer. C. 73 (2017) 234-244.10.1016/j.msec.2016.11.08828183604
Search in Google Scholar Back to article
25. Kim J.Y., Song J.Y., Lee J.E., Park S.K., Rheological properties and microstructures of Carbopol gel network system. Colloid Polym. Sci. 281 (2003) 614-623.10.1007/s00396-002-0808-7
Search in Google Scholar Back to article
26. Beck Tan N.C., Tai S.K,. Bribert R.M., Morphology control and interfacial reinforcement in reactive polystyrene/amorphous polyamide blends. Polymer. 37 (1996) 3509-3519.10.1016/0032-3861(96)00172-3
Search in Google Scholar Back to article
27. Wang J.Q., Han Z.D., The combustion behavior of polyacrylate ester/graphite oxide composites. Polym Adv Technol. 17 (2006) 335-340.10.1002/pat.698
Search in Google Scholar Back to article
28. Nikiforov AA., Okhotina NA., Fayzullin IZ., Volfson SI., Rinberg R., Kroll L., In Gorkunov ES, Panin VE, Ramasubbu S, editors. AIP Conference Proceedings AIP Publishing. 1785 (2016) 030018.
Search in Google Scholar Back to article
29. Hong C.H., Lee Y.B., Bae J.W., Jho J.Y., Nam BU., Hwang T.W., Preparation and mechanical properties of polypropylene/clay nanocomposites for automotive parts application. J. Appl. Polym. Sci. 98 (2005) 427-433.10.1002/app.21800
Search in Google Scholar Back to article

Polyamide 1010/Polythioamide Blend Reinforced with Graphene Nanoplatelet for Automotive Part Application

Abstract

Paradigm

My account