Cavitation Erosion of P110 Steel in Different Drilling Muds

M. Kmieć; B. Karpiński; M. Szkodo

doi:10.1515/adms-2016-0009

.blurhash-client-img { display: none !important; }

Cavitation Erosion of P110 Steel in Different Drilling Muds

Advances in Materials Science

Volume 16 (2016): Issue 2 (June 2016)

By: M. Kmieć, B. Karpiński and M. Szkodo

Open Access

|Aug 2016

Abstract

The P110 steel specimens were subjected to ultrasonic cavitation erosion in different compositions of drilling muds and surfactant additive. The test procedure was based on ASTM-G-32 standard recommendations. API 5CT-P110 steel is used for pipes in oil and gas industry. The harsh environment and high velocity of flows poses corrosive and erosive threat on materials used there. The composition of drilling fluid influences its rheological properties and thus intensity of cavitation erosion. The erosion curves based on weight loss were measured.

References

1. Brennen C.E., Cavitation in medicine. Interface Focus, 5 (2015).10.1098/rsfs.2015.0022454984726442145
Search in Google Scholar
2. Gogate P.R., Kabadi A.M., A review of applications of cavitation in biochemical engineering/biotechnology. Biochemical Engineering Journal, 44 (2009), 60-72.
Search in Google Scholar
3. Szkodo M., Estimation of cavitation erosion resistance of materials. Advances in Materials Science, 6 (2006), 43-48.
Search in Google Scholar
4. Rosenberg LD. Powerful ultrasonic fields, Nauka Moscow (1968), 18-45.
Search in Google Scholar
5. Peng C-h, Liu Z-y, Wei X-z. Failure analysis of a steel tube joint perforated by corrosion in a well-drilling pipe. Engineering Failure Analysis, 25 (2012), 13-28.
Search in Google Scholar
6. Smith L. Control of corrosion in oil and gas production tubing. British Corrosion Journal, 34, 4 (1999), 247-53.
Search in Google Scholar
7. Institute AP. API 5-CT specification for casing and tubing, 9th edition, 2011.
Search in Google Scholar
8. Hernandez S., Linares F.L., Bruzual J., Luzon J.G., Isolation of Potential Corrosion Inhibiting Compounds in Crude Oils. NACE International.
Search in Google Scholar
9. Brennen C.E., Cavitation and Bubble Dynamics: Oxford University Press; 1995.
Search in Google Scholar
10. Brondel D, Edwars R, Hayman A, Hill D, Mehta S, Semerad T., Corrosion in the Oil industry. Oilfield Review, 6 (1994).
Search in Google Scholar
11. ASTM. G32-10 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus, 2010.
Search in Google Scholar
12. Ultrasonics H., UP200s/UP400S Instruction manual Ultrasonic processors for Laboratories.
Search in Google Scholar
13. Dugan G., The Versatile PAC Polymer. National Driller, 30(1) (2009), 60-72.
Search in Google Scholar
14. El-Lateef H.M., Abbasov V.M., Aliyeva L.I., Ismayilov T.A., Some surfactants based on the vegetable oils as CO2 corrosion Inhibitors for mild steel in oilfield formation water. International Journal of Corrosion Scale Inhibition, 4(2) (2015), 162-175.10.17675/2305-6894-2015-4-2-162-175
Search in Google Scholar
15. Brujan E.A., Cavitation bubble dynamics in non-Newtonian fluids. Polymer Engineering & Science, 49(3) (2009), 419-431.10.1002/pen.21292
Search in Google Scholar
16. Gruzdkov A. A, Petrov Y.V., Cavitation breakup of low-and high-viscosity liquids. Technical Physics, 53(3) (2008), 291-295.10.1134/S106378420803002X
Search in Google Scholar
17. Arora M., Cavitation Inception on Microparticles: A Self-Propelled Particle Accelerator. Physical Review Letters, 92(17) (2004), 174501.10.1103/PhysRevLett.92.17450115169155
Search in Google Scholar
18. Gronroos A, Pentti P, Hanna K., Ultrasonic degradation of aqueous carboxymethylcellulose: effect of viscosity, molecular mass, and concentration. Ultrasonic Sonochemistry, 15 (2008), 644-652.10.1016/j.ultsonch.2007.09.00517986397
Search in Google Scholar
19. Mettin R., et al., Imaging of the influence of surfactants on bubble structures. DAGA. Stuttgart 2007, 119-20.
Search in Google Scholar
20. Lee J, Kentish S, Matula T.J., Ashokkumar M., Effect of surfactants on inertial cavitation activity in a pulsed acoustic field. The Journal of Physical Chemistry B, 109 (2005), 16860-16865.
Search in Google Scholar

Articles in this issue

DOI: https://doi.org/10.1515/adms-2016-0009 | Journal eISSN: 2083-4799 | Journal ISSN: 1730-2439

Journal RSS Feed

Language: English

Page range: 57 - 67

Published on: Aug 2, 2016

Published by: Gdansk University of Technology

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

sorbite,

Related subjects:

Functional and smart materials

© 2016 M. Kmieć, B. Karpiński, M. Szkodo, published by Gdansk University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 16 (2016): Issue 2 (June 2016)