References
- 1. Martin-Marquez J., Rincon J., Ma. Romero M., Effect of firing temperature on sintering of porcelain stoneware tiles. Ceramics International, 34 (2008), 1867-1873.
- 2. Galos K., Influence of mineralogical composition of applied ball clays on properties of porcelain tiles. Ceramics International, 37 (2011), 851-861.
- 3. Dondi M., Raimondo M., Zanelli C., Clays and bodies for ceramic tiles: Reappraisal and technological classification. Applied Clay Science, 96 (2014), 91-109.
- 4. Gajek M., Partyka J., Lis J., Microstructure and High-Strength Glass-Ceramic Coatings. 38th Int. Conf. on Advanced Ceramics and Composites, Daytona Beach, USA, (2014), 169-174.
- 5. Mandecka-Kamień L., Rapacz-Kmita http://www.sciencedirect.com/science/article/pii/S0272884214018665 ‐ aff0005A., Gajek M., Dudek M., The phase composition of mixtures in corundum-rich Al2O3-CaO-P2O5 systems. Ceramics International, 41 (2015), 4093-4100.
- 6. Rapacz-Kmita A., Stodolak-Zych E., Szaraniec B., Gajek M., Dudek P., Effect of clay mineral on the accelerated hydrolytic degradation of polylactide in the polymer/clay nanocomposites. Materials Letters, 146 (2015), 73-76.
- 7. Sánchez E., García-Ten J., Sanz V., Moreno A., Porcelain tile: Almost 30 years of steady scientific-technological evolution. Ceramics International, 36 (2010), 831-845.
- 8. Panna W., Wyszomirski P., Gajek M., Characteristics of the fine-grained fractions of the crushed strzegom granites as possible materials in manufacture of ceramic tiles (in Polish). Gospodarka Surowcami Mineralnymi - Mineral Resources Management, 31 (2015), 59-76.
- 9. Wyszomirski P., Galos K., Triassic red clays of Tarnowskie Góry-Kępno region in respect of their usefulness for the polish ceramic industry. Gospodarka Surowcami Mineralnymi - Mineral Resources Management, 21 (2005), 149-166
- 10. Wyszomirski P., Galos K., Clayey raw materials for the domestic industry of the fine and technical ceramics Part III. Triassic red clays. Materiały Ceramiczne/Ceramic Materials, 59 (2007), 102-110.
- 11. Gacki F., Karczmarski P., New possibilities of pressed clinker applications (in Polish). Materiały Ceramiczne/Ceramic Materials, 60 (2008), 157-159.
- 12. Wyszomirski P., Galos K., Polish clayey raw materials for the production of ceramic tiles. Clay Mineral, 44 (2009), 497-509.
- 13. Wyszomirski P., Muszyński M., Zawrzykraj W.: Red clays from Szkucin (świętokrzyskie voivodeship) and their industrial application (in Polish). Gospodarka Surowcami Mineralnymi - Mineral Resources Management, 26 (2010), 5-20.
- 14. Gajek M., Partyka J., Rapacz-Kmita A., Wójcik Ł., Dudek M., Gasek K., Clays of Wierzbka I deposit (northern margin of Holy Cross Mountains) for the production of clinker tiles (in Polish). Gospodarka Surowcami Mineralnymi - Mineral Resources Management, 32 (2016) 89-102.
- 15. Szuflicki M., Malon A., Tymiński M., Assessment of Poland's mineral resources as of 31 December 2014. The Polish Geological Institute - National Research Institute, Warszawa, 2014.
- 16. PN-EN ISO 10545-3, Ceramic tiles, Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density, 1999.
- 17. PN-EN ISO 10545-4, Ceramic tiles, Part 4: Determination of modulus of rupture and breaking strength, 2014.
- 18. Suvaci E., Tamsu N., The role of viscosity on microstructure development and stain resistance in porcelain stoneware tiles. Journal of the European Ceramic Society, 30 (2010), 3071-3077.
- 19. PN-EN 14411, Ceramic tiles - Definitions, classification, standard: characteristics, evaluation of conformity and marking, 2013.