References
- Alvas LH, Gonzalez JE, Dukhan N (2006) Initial Analysis of PCM Integrated Solar Collectors. Journal of Solar Energy Engineering 128: 173—177. doi: 10.1115/1.2188532.
- Cabeza L, Illa J, Roca J, Badia F, Mehling H, Hiebler S, Ziegler F (2001a) Immersion corrosion tests on metal–salt hydrate pairs used for latent heat storage in the 32 to 36 Deg temperature range. Mater Corros 52: 140—146. doi: 10.1002/1521-4176(200102)52:2<;140::AID-MACO140>3.0.CO;2-R.
- Cabeza L, Illa J, Roca J, Badia F, Mehling H, Hiebler S, Ziegler F (2001b) Middle term immersion corrosion tests on metal—salt hydrate pairs used for latent heat storage in the 32 to 36 Deg temperature range. Mater Corros 52: 748—754. doi: 10.1002/1521-4176(200110)52:10<;748::AID-MACO748>3.0.CO;2-S.
- Cabeza LF, Svensson G, Hiebler S, Mehling H (2003) Thermal performance of sodium acetate trihydrate thickened with different materials as phase change energy storage material. Appl Therm Eng 23: 1697—1704. doi: 10.1016/S1359-4311(03)00107-8.
- Davis JR (2000) Corrosion — understanding the basics. 1st ed., ASM International, Ohio; ISBN: 978-0-87170-641-6 cited by Moreno P, Miró L, Solé A, Barreneche C, Solé C, Martorell I, Cabeza LF (2014).
- Khan Z, Khan Z, Ghafoor A (2016) A review of performance enhancement of PCM based latent heat storage system within the context of materials, thermal stability and compatibility. Energy Convers. Manage 115: 132—158. doi: 10.1016/j.enconman.2016.02.045.
- Khudhair AM, Farid MM (2004) A review on energy conservation in building applications with thermal storage by latent heat using phase change materials. Energy Convers Manage 45: 263—275. doi: 10.1016/S0196-8904(03)00131-6.
- Lin KP, Di HF (2007) Performance of a hybrid heating system with thermal storage using shape-stabilized phase-change material plates. Applied Energy 84: 1068—1077. doi: 10.1016/j.apenergy.2006.09.015.
- Medrano M, Yilmaz MO, Nogués M, Martorell I, Roca J, Cabeza LF (2009) Experimental evaluation of commercial heat exchangers for use as PCM thermal storage systems. Applied Energy 86: 2047—2055. doi: 10.1016/j.apenergy.2009.01.014.
- Mehling H, Cabeza LF (2008) Heat and cold storage with PCM an up to date introduction into basics and applications. Springer, Berlin. ISBN 978-3-540-68557-9.
- Mondal S (2008) Phase change materials for smart textiles — An overview. Applied Thermal Engineering 28: 1536—1550. doi: 10.1016/j.applthermaleng.2007.08.009.
- Moreno P, Miró L, Solé A, Barreneche C, Solé C, Martorell I, Cabeza LF (2014) Corrosion of metal and metal alloy containers in contact with phase change materials (PCM) for potential heating and cooling applications. Appl Energy 125: 238—245. doi: 10.1016/j.apenergy.2014.03.022.
- Nagano K, Ogawa K, Mochida T, Hayashi K, Ogoshi H (2004) Performance of heat charge/discharge of magnesium nitrate hexahydrate and magnesium chloride hexahydrate mixture to a single vertical tube for a latent heat storage system. Appl Therm Eng 24: 209—220. doi: 10.1016/j.applthermaleng.2003.09.002.
- Pilař R, Sádovská G, Honcová P (2015) Thermal capacity and accumulation properties of Ca(NO3)2 · 4H2O and Mg(NO3)2 · 6H2O (in Czech). In: Proceedings of Termoanalytický seminář TAS 2015, University Pardubice, Czech Republic pp. 29—34. ISBN 978-80-7395-888-6.
- Sari A, Biçer A, Karaipekli A, Alkan C, Karadag A (2010) Synthesis, thermal energy storage properties and thermal reliability of some fatty acid esters with glycerol as novel solid–liquid phase change materials. Solar Energy Materials and Solar Cells 94: 1711—1715. doi: 10.1016/j.solmat.2010.05.033.
- Sharma A, Tyagi VV, Chen CR, Buddhi D (2009) Review on thermal energy storage with phase change materials and applications. Renewable and Sustainable Energy Reviews 13: 318—345. doi: 10.1016/j.rser.2007.10.005.