Patient-Specific Modeling for Structural Heart Intervention: Role of 3D Printing Today and TomorrowCME

Marija Vukicevic; Stefano Filippini; Stephen H. Little

doi:10.14797/mdcj-16-2-130

Patient-Specific Modeling for Structural Heart Intervention: Role of 3D Printing Today and TomorrowCME

Methodist DeBakey Cardiovascular Journal

Volume 16 (2020): Issue 2

By: Marija Vukicevic, Stefano Filippini and Stephen H. Little

Open Access

|Apr 2020

Abstract

Structural heart interventions (SHIs) are increasingly applicable in a wide range of heart defects, but the intricate and dynamic nature of cardiac structures can make SHIs challenging to perform. Three-dimensional (3D) printed modeling integrates advanced clinical imaging and 3D printing technology to replicate patient-specific anatomy for comprehensive planning and simulation of SHIs. This review discusses the basic principles of patient-specific 3D print model development, print material selection, and model fabrication and highlights how cardiovascular 3D printing can be used in preprocedural planning, device sizing, enhanced communication, and procedure simulation.

References

Little SH Vukicevic M Avenatti E Ramchandani M Barker CM 3D Printed Modeling for Patient-Specific Mitral Valve Intervention: Repair With a Clip and a Plug JACC Cardiovasc Interv 2016 May 9 9 9 973 5
Search in Google Scholar Back to article
Vukicevic M Puperi DS Jane Grande-Allen K Little SH 3D Printed Modeling of the Mitral Valve for Catheter-Based Structural Interventions Ann Biomed Eng 2017 Feb 45 2 508 19
Search in Google Scholar Back to article
Biglino G Schievano S Taylor AM The Use of Rapid Prototyping in Clinical Applications In Dr. M Hoque editor Advanced Applications of Rapid Prototyping Technology in Modern Engineering [Internet] London InTechOpen Limited c2011 [Cited 2020 Jan 30]. Available from: http://cdn.intechweb.org/pdfs/20117.pdf
Search in Google Scholar Back to article
Vukicevic M Mosadegh B Min JK Little SH Cardiac 3D Printing and its Future Directions JACC Cardiovasc Imaging 2017 Feb 10 2 171 84
Search in Google Scholar Back to article
Schievano S Taylor AM Capelli C First-in-man implantation of a novel percutaneous valve: a new approach to medical device development EuroIntervention 2010 Jan 5 6 745 50
Search in Google Scholar Back to article
Mahmood F Owais K Montealegre-Gallegos M Echocardiography derived three-dimensional printing of normal and abnormal mitral annuli Ann Card Anaesth 2014 Oct–Dec 17 4 279 83
Search in Google Scholar Back to article
Wang DD Gheewala N Shah R Three-Dimensional Printing for Planning of Structural Heart Interventions Interv Cardiol Clin 2018 Jul 7 3 415 23
Search in Google Scholar Back to article
Wang DD Eng M Greenbaum A Predicting LVOT Obstruction After TMVR JACC Cardiovasc Imaging 2016 Nov 9 11 1349 52
Search in Google Scholar Back to article
Otton JM Birbara NS Hussain T Greil G Foley TA Pather N 3D printing from cardiovascular CT: a practical guide and review Cardiovasc Diagn Ther 2017 Oct 7 5 507 26
Search in Google Scholar Back to article
Vukicevic M Vekilov DP Grande-Allen J Little SH Patient-specific 3D Valve Modeling for Structural Intervention Structural Heart 2017 Nov 1 5–6 236 48
Search in Google Scholar Back to article
Wang K Wu C Qian Z Zhang C Wang B Vannan MA Dual-material 3D printed metamaterials with tunable mechanical properties for patient-specific tissue-mimicking phantoms Additive Manufacturing 2016 Oct 12 Part A 31 7
Search in Google Scholar Back to article
Maragiannis D Jackson MS Igo SR Chang SM Zoghbi WA Little SH Functional 3D printed patient-specific modeling of severe aortic stenosis J Am Coll Cardiol 2014 Sep 9 64 10 1066 8
Search in Google Scholar Back to article
Maragiannis D Jackson MS Igo SR Replicating Patient-Specific Severe Aortic Valve Stenosis With Functional 3D Modeling Circ Cardiovasc Imaging 2015 Oct 8 10 e003626
Search in Google Scholar Back to article
Vukicevic M Maragiannis D Jackson M Little SH Abstract 18647: Functional Evaluation of a Patient-specific 3D Printed Model of Aortic Regurgitation Circulation 2015 Nov 10 132 A18647
Search in Google Scholar Back to article
Vukicevic M Mosadegh B Min JK Little SH Cardiac 3D Printing and its Future Directions JACC Cardiovasc Imaging 2017 Feb 10 2 171 84
Search in Google Scholar Back to article
Harb SC Rodriguez LL Vukicevic M Kapadia SR Little SH Three-Dimensional Printing Applications in Percutaneous Structural Heart Interventions Circ Cardiovasc Imaging 2019 Oct 12 10 e009014
Search in Google Scholar Back to article
Vukicevic M Avenatti E El-Tallawi KC Barker CM Little SH 3D printed modeling of Tricuspid valve for structural heart valve interventions J Am Soc Echocardiography 2017 30 6 B37
Search in Google Scholar Back to article
Hachulla AL Noble S Guglielmi G Agulleiro D Muller H Vallee JP 3D-printed heart model to guide LAA closure: useful in clinical practice? Eur Radiol. 2019 Jan 29 1 251 258
Search in Google Scholar Back to article
Obasare E Mainigi SK Morris DL CT based 3D printing is superior to transesophageal echocardiography for pre-procedure planning in left atrial appendage device closure Int J Cardiovasc Imaging 2018 May 34 5 821 31
Search in Google Scholar Back to article
Robinson SS Alaie S Sidoti H Patient-specific design of a soft occluder for the left atrial appendage Nat Biomed Eng 2018 Jan 2 1 8 16
Search in Google Scholar Back to article
Vukicevic M Conover T Jaeggli M Control of respiration-driven retrograde flow in the subdiaphragmatic venous return of the Fontan circulation ASAIO J 2014 Jul–Aug 60 4 391 9
Search in Google Scholar Back to article
Anwar S Singh GK Miller J 3D Printing is a Transformative Technology in Congenital Heart Disease JACC Basic Transl Sci 2018 May 30 3 2 294 312
Search in Google Scholar Back to article
Fuentes Rojas S Vukicevic M Thakkar AN Little SH Lin CH 3D Cardiac Printing to Plan Transcatheter Closure of an Iatrogenic Primum Atrial Septal Defect Structural Heart 2019 Nov 2 3 6 512 3
Search in Google Scholar Back to article
Gosnell J Pietila T Samuel BP Kurup HK Haw MP Vettukattil JJ Integration of Computed Tomography and Three-Dimensional Echocardiography for Hybrid Three-Dimensional Printing in Congenital Heart Disease J Digit Imaging 2016 Dec 29 6 665 9
Search in Google Scholar Back to article
Olivieri LJ Krieger A Loke YH Nath DS Kim PC Sable CA Three-dimensional printing of intracardiac defects from three-dimensional echocardiographic images: feasibility and relative accuracy J Am Soc Echocardiogr 2015 Apr 28 4 392 7
Search in Google Scholar Back to article
Biglino G Koniordou D Gasparini M Piloting the Use of Patient-Specific Cardiac Models as a Novel Tool to Facilitate Communication During Cinical Consultations Pediatr Cardiol 2017 Apr 38 4 813 8
Search in Google Scholar Back to article
Thakkar AN Chinnadurai P Breinholt JP Lin CH Transcatheter closure of a sinus venosus atrial septal defect using 3D printing and image fusion guidance Catheter Cardiovasc Interv 2018 Aug 1 92 2 353 7
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.14797/mdcj-16-2-130 | Journal eISSN: 1947-6108

Journal RSS Feed

Language: English

Page range: 130 - 137

Published on: Apr 1, 2020

Published by: Houston Methodist DeBakey Heart & Vascular Center

In partnership with: Paradigm Publishing Services

Keywords:

structural heart interventions,

3D printing,

patient-specific models,

heart valves,

congenital heart defects

© 2020 Marija Vukicevic, Stefano Filippini, Stephen H. Little, published by Houston Methodist DeBakey Heart & Vascular Center
This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 License.

Volume 16 (2020): Issue 2