References
- F. J. Maldonado, S. Oonk, T. Politopoulos, “ Enhancing Vibration Analysis by Embedded Sensor Data Validation Technologies”, IEEE Instrumentation & Measurement Magazine, vol.16, no. 4, August 2013, pp. 50-60, doi: 10.1109/MIM.2013.6572957.
- C. Teal, C. Satterlee, “Managed Aircraft Wiring Health Directly Relates to Improved Avionics Performance”, Proceedings of 19th Digital Avionics Systems Conference. (Cat. No.00CH37126), 7-13 October 2000, doi: 10.1109/DASC.2000.886926.
- L. Silver, D. W. Christenson, “Developing a Stable Architecture for Interfacing Aircraft to Commercial Personal Computers”, Proceedings AUTOTESTCON 2003. IEEE Systems Readiness Technology Conference, 22-25 September 2003, doi: 10.1109/AUTEST.2003.1243560.
- K. F. Roosendaal, D. W. Christenson, “ Embedded Computer Software Loader/verifier Implementation Using a Hardware and Software Architecture Based upon Best Practices Derived from Multiple Spiral Developments and the Joint Technical Architecture”, Proceedings AUTO-TESTCON 2003. IEEE Systems Readiness Technology Conference, 22-25 September 2003, doi: 10.1109/AUTEST.2003.1243622.
- A. N. Srivastava, R. W. Mah, C. Meyer, “ Integrated Vehicle Health Management”, National Aeronautics and Space Administration, Aeronautics Research Mission Directorate, Aviation Safety Program, Technical Plan, Version 2.03, November 2009, pp. 1-73.
- F. Gustafsson, “Automotive Safety Systems, Replacing Costly Sensors with Software Algorithms”, IEEE Signal Processing Magazine, vol. 26, 2009, pp. 32-47.
- A. Leone, “Automotive Design: At the Beginning Only was Light”, IEEE Instrumentation & Measurement Magazine, vol. 22, iss. 1, February 2019, pp. 28-32, doi: 10.1109/MIM.2019.8633348.
- D. Serritiello, “Human-machine Interaction, Methods and International Standards”, IEEE Instrumentation & Measurement Magazine, vol. 22, iss. 1, February 2019, pp. 33-35, doi: 10.1109/MIM.2019.8633349.
- ISO 15006:2011, “Road Vehicles Ergonomics Aspects of Transport Information and Control Systems: Specifications for In-vehicle Auditory Presentation”, International Organization of Standardization, https://www.iso.org/standard/55322.html.
- A. M. Di Natale, “The Evolution of Passive Safety in I&M”, IEEE Instrumentation & Measurement Magazine, vol.22, iss. 1, February 2019, pp. 5-10, doi: 10.1109/MIM.2019.8633324.
- S. Stahlschmidt, A. Gromer, M. Walz, “WorldSID 50th vs. ES-2. A Comparison Based on Simulations”. Proceedings LS-Dyna Forum, Bamberg 2010, pp. 13-32.
- M. Dudzik, “Methodology of calculating maximal possible acceleration limited by the adhesion condition for a traction vehicle on the example of the FLIRT ED 160 model produced by stadler”, 2018 International Symposium on Electrical Machines (SME), Andrychów, Poland, 10-13 June 2018, 2018, doi: 10.1109/ISEM.2018.8442891.
- C. R. Parkey, D. B. Chester, M. T. Hunter, W. B. Mikhael, “Simulink modeling of analog to digital converters for post conversion correction development and evaluation”, IEEE 54-th International Midwest Symposium on Circuits and Systems (MWSCAS), 2011, pp. 1-4, 7-10, doi: 10.1109/MWSCAS.2011.6026634.
- D. A Tagliente, C. Lyding, J. Zawislak, D. Marston. “Expanding Emulation from Test to Create Realistic Virtual Training Environments”, 2014 IEEE AUTOTEST, 15-18 September 2014, doi: 10.1109/AUTEST.2014.6935140.
- I. McGregor, “The Relationship between Simulation and Emulation”, Proceedings of 2002 Winter Simulation Conference, vol. 2, 8-11 December 2002, pp. 1683-1688, doi: 10.1109/WSC.2002.1166451.
- W. J. Headrick G. Garcia, “Automated Configuration of Modern ATE”, IEEE Instrumentation & Measurement Magazine, vol. 21, iss. 4, August 2018, pp. 22-26, doi: 10.1109/MIM.2018.8423742.
- J. W. Sheppard, S. Strasser, “Multiple Fault Diagnosis Using Factored Evolutionary Algorithms”, IEEE Instrumentation & Measurement Magazine, vol. 21, iss. 4, August 2018, pp. 27-38, doi: 10.1109/MIM.2018.8423743.
- H. King, N. Fortier, J. W. Sheppard, “An AI-ESTATE Conformant Interface for Net-Centric Diagnostic and Prognostic Reasoning”, IEEE Instrumentation & Measurement Magazine, vol. 18, iss. 4, August 2015, pp. 18-24, doi: 10.1109/MIM.2015.7155768.
- IEEE Standard for Artificial Intelligence Exchange and Service Tie to All Test Environments ( AI-ESTATE), IEEE Standard 1232, 2010, https://standards.ieee.org/standard/1232-2010.html.
- M. Galvani, “History and Future of Driver Assistance”, IEEE Instrumentation & Measurement Magazine, vol. 22, iss. 1, February 2019, pp. 11-16, doi: 10.1109/MIM.2019.8633345.
- A. Secondi, “Vehicle Suspension”, IEEE Instrumentation & Measurement Magazine, vol. 22, iss. 1, February 2019, pp. 19-27, doi: 10.1109/MIM.2019.8633347.
- T. D. Gillespie, Fundamentals of Vehicle Dynamics, Society of Automotive Engineers, Inc.: Warrendale, PA, USA, 1992.
- E. Helmers, P. Marx, “Electric cars: technical characteristics and environmental impacts”, Environmental Sciences: Europe 24, 14, 2012, doi: 10.1186/2190-4715-24-14.
- G. Zhou “A Neural Network Approach to Fault Diagnosis for Power Systems”, Proceedings of TENCON ‘93. IEEE Region 10 International Conference on Computers, Communications and Automation, 19-21 October 1993, pp. 885-888, doi: 10.1109/TENCON.1993.320155.
- M. Nakonechnyi, O. Ivakhiv, T. Repetylo, I. Strepko, “Car speed control with neurocontroller”, Computer technology of printing, no. 33, 2015, pp. 18-27 (in Ukrainian).
- S. Omatu, B. M. Khalid, R. Yusof, Neuro-Control and its Applications. Advances in Industrial Control, Springer Verlag: New York, 1996.
- W. T. Miller, R. S. Sutton, P. J. Werrbos. Neural Networks for Control. MIT Press: Cambridge, MA, 1990.
- M. Norgaard, O. Ravn, N. Poulsen, L. Hansen. Neural Networks for Modelling and Control of Dynamic Systems. Springer: London, 2000.
- Y. Hirnyak, O. Ivakhiv, M. Nakonechnyi, T. Repetylo, “Control System of Robot Movement”, IEEE 7th International Conference on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS), 12-14 September 2013, pp. 334-337, doi: 10.1109/IDAACS.2013.6662700.
- M. Nakonechnyi, O. Ivakhiv, T. Repetylo,”Car Speed Control with Different Types of Controllers”, XI International Conference on Perspective Technologies and Methods in MEMS Design (MEMSTECH), 2-6 September 2015, pp. 72-74.
- S. M. Shinners, Modern Control System Theory and Design. John Wiley and-Sons, Inc. New York / Chichester / Brisbane / Toronto / Singapore, 1992.
- B. C. Kuo, Automatic Control Systems. Prentice Hall, New Jersey, 1996.
- C. L. Phillips, R. D. Harbor, Feedback Control Systems. Prentice Hall, Upper Saddle River, New Jersey, 2000.
- G. C. Goodwin, S. F. Graebe, M. E. Salgado, Control System Design. Prentice Hall, Upper Saddle River, New Jersey, 2001.
- M. H. Popovich, O. V. Kovalchuk, The theory of automatic control. Textbook. Lybid, Kyiv, 2007 (in Ukrainian).
- K. Ogata, Modern Control Engineering, Pearson, 2010.
- J. Su, M. Nakonechnyi, O. Ivakhiv, A. Sachenko, “Developing the Automatic Control System Based on Neural Controller”, Information Technology and Control, vol. 44, no. 3, 2015, pp. 262-270, doi: 10.5755/j01.itc.44.3.7717.
- M. Nakonechnyi, O. Ivakhiv, Y. Nakonechnyi, Neural Network Control Systems for Nonlinear Objects: Monograph. Raster - 7. Publishing House: Lviv, 2017 (in Ukrainian).
- J. B. Dabney, T. L. Harman, Mastering Simulink 4. Prentice Hall, Upper Saddle River, New Jersey, 2001.
- H. Demuth, M. Beale, Neural Network Toolbox for use with MATLAB. The Math-Works, Inc., Natick, 1992.
- M. Nakonechnyi, O. Ivakhiv, R. Velgan, M. Geraimchuk, O. Viter, “Investigation of the control law influence on the dynamic characteristics of vehicle movement control system model”, 21st International Conference on Research and Education in Mechatronics (REM), 9-11 December 2020, pp. 100-107, doi: 10.1109/REM49740.2020. 9313908.