Skip to main content
Have a personal or library account? Click to login
The Influence of the Inclination of the Crack Plane Relative the Annual Rings Direction on the Cracking Process of Pine Wood Cover

The Influence of the Inclination of the Crack Plane Relative the Annual Rings Direction on the Cracking Process of Pine Wood

Open Access
|Sep 2026

References

  1. Morel S, Dourado N, Valentin G, J. Morais. Wood: A quasibrittle material R-curve behavior and peak load evaluation. Int. J. Fract. 2005;131:385–400.
  2. Sorin E, Coureau J, Perez C. MODE I and II R-curves characterization of the Maritime Pine and Spruce under the same geometry. Eng. Fract. Mech. 2022; 269:108472.
  3. Kossakowski P.G. Fracture toughness of pine wood for I and II loading modes. Arch. Civil Eng. 2008; 55(3).
  4. Romanowicz M, Grygorczuk M. The effect of crack orientation on the mode I fracture resistance of pinewood. Int. Journal of Fract. 2024; 248: 27–48.
  5. Romanowicz M, Grygorczuk M. An Experimental and Numerical Study of Mode I and Mode II Fracture in Pinewood for Different Crack Orientations. Mech. Comp. Mater. 2025; 61 (2).
  6. Romanowicz M, Grygorczuk M. Experimental investigation of the mode I fracture energy of wood using DIC and secant compliance techniques and its numerical validationInternational. J. Solids Struct. 2026; 325 (15): 113735.
  7. Phan N.A, Morel S, Chaplain M, Coureau J. R-curve on fracture criteria for mixed-mode in crack propagation in quasi-brittle material: Application for Wood. Proc. Mater. Sci. 2014; 3: 973-978.
  8. Hiroshi Y. MODE II R-curve of wood measured by 4-ENF test. Eng. Fract. Mech. 2004; 71: 2065-2077.
  9. De Moura MFSF., Oliveira JMQ., Morais JJL., Xavier J. Mixed-mode I/II wood fracture characterization using the mixed-mode bending test. Eng. Fract. Mech. 2010; 77: 144-152.
  10. Xavier J, Oliveira M, Montei ro P, Morais J.J.L, de Moura M.F.S.F. Direct Evaluation of Cohesive Law in Mode I of Pinus pinaster by Digital Image Correlation. Exp.Mech. 2014; 54: 829–840.
  11. Xavier J, Oliveira M, Morais J.J.L, de Moura M.F.S.F. Determining mode II cohesive law of Pinus pinaster by combining the end-notched flexure test with digital image correlation. Constr. Building Mater. 2014; 71: 109–115.
  12. Neimitz A. Mechanika pękania. Warszawa: PWN; 1998
  13. Wilczyński A., Gogolin M. Badania właściwości sprężystych drewna sosny, buka i dębu. Studia techniczne. 1990; 15: 89-123.
  14. Zhongwen Z, Aravind D. Effect of temperature on the fracture energy of adhesive layers of engineered wood. Int. J. Adhesion and Adhesives. 2022; 117: 103185.
DOI: https://doi.org/10.65731/ama/2026-0057 | Journal eISSN: 2300-5319 | Journal ISSN: 1898-4088
Language: English
Page range: 577 - 583
Submitted on: Feb 24, 2026
Accepted on: Jun 16, 2026
Published on: Sep 5, 2026
Published by: Bialystok University of Technology
In partnership with: Paradigm Publishing Services

© 2026 Maciej Grygorczuk, Marek Romanowicz, published by Bialystok University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.