Solid-State Synthesis of Powders of Ni–Cr and Ni–Mо Alloys
References
- Sims CT, Stoloff NS, Hagel WC. Superalloys II: High-Temperature Materials for Aerospace and Industrial Power. New York: Wiley-Inter-science; 1987.
- Cherepova T, Dmitrieva G, Tisov O, Dukhota O, Kindrachuk M. Research on the properties of Co–TiС and Ni–TiС hip-sintered alloys. Acta Mechanica et Automatica. 2019;13(1): 57–67. https://doi.org/10.2478/ama-2019-0009
- Wenbo Ma, Yubo Zhao, Łępicka M, Tisov O. Enhanced microstructure, mechanical, and tribological properties of Al, Ti, and nano-hBN-modified CoCrFeMnNi high-entropy alloy composites at elevated temperatures. Wear. 2025;572-573: 206055. https://doi.org/10.1016/j.wear.2025.206055
- Mouritz A. Introduction to Aerospace Materials. Oxford: Woodhead Publishing Limited; 2012.
- Okazaki M. High-temperature strength of Ni-base superalloy coatings. Science and Technology of Advanced Materials. 2000;2(2): 357–366. https://doi.org/10.1016/S1468-6996(00)00022-X
- Chen S, Liu Z, Shen Y, Liu S. High-temperature corrosion of Ni–Cr– Mo cladding layers with different Si contents in NaCl–KCl–Na2SO4– K2SO4 mixed salt medium. Materials. 2022;15(9): 3152. https://doi.org/10.3390/ma15093152
- Mediukh R, Mediukh V, Labunets V, Nosko P, Bashta O, Kondratenko I. Investigation of structure formation and tribotechnical properties of steel plasma coatings after chemical-heat treatment and liquid-phase impregnation. Acta Mechanica et Automatica. 2022;16(4): 382–7. https://doi.org/10.2478/ama-2022-0045
- Kabátová M, Medyukh R, Kostenko V, Mihalik J, Seveíkova J. Secondary and finishing operations: improvement of corrosion and wear resistance of sintered steels by coating. European Congress and Exhibition on Powder Metallurgy. European PM Conference Proceedings. In Vienna. 2004;2: 423–6.
- Medukh R, Kabatova M, Parilak L, Kostenko V, Dzubinsky M, Dudrova E. Microstructure and Properties of Layers Produced on Sintered Steels by Electrolytic Coatings and Diffusion Chroming. Int. Conference ”Protective Coating 2002”. Slovak Republic; 2002.
- El-Bagoury N. Ni based superalloy: casting technology, metallurgy, development, properties and applications. International Journal of Engineering Sciences & Research Technology. 2016;5(2): 108–51.
- Moyer JM, Jackman LA, Adasczik CB, Davis RM, Forbes-Jones R. Advances in triple melting superalloys 718, 706, and 720. In: Superalloys 718, 625, 706 and Various Derivatives. Ed. Loria EA. Warrendale: The Minerals, Metals and Materials Society. 1994; 39–48.
- Wangyao P, Zrnik J, Vrchovinsky V, Novy Z, Kasanicka B. The analysis of creep behavior in an annealed nickel based alloy. The Journal of Metals, Materials and Minerals. 2022;12(2): 67–73.
- Vrchovinský V, Zrnik J, Kvackaj T, Wangyao P. Effect of final cold rolled microstructures on creep deformation behavior in nickel base alloy. The Journal of Metals, Materials and Minerals. 2022;15(2): 57–68.
- Wangyao P, Kvackaj T, Zrnik J, Vrchovinsky V, Novy Z. Effect of forming parameters on hot working process in nickel base alloy. The Journal of Metals, Materials and Minerals. 2022;13(2): 1–10.
- Sreenu B, Sarkar R, Kumar SSS, Chatterjee S, Rao GA. Microstructure and mechanical behaviour of an advanced powder metallurgy nickel base superalloy processed through hot isostatic pressing route for aerospace applications. Materials Science and Engineering: A. 2020;797: 140254. https://doi.org/10.1016/j.msea.2020.140254
- Suryanarayana C. Mechanical alloying and milling. Progress in Materials Science. 2001;46(1-2): 1–184. https://doi.org/10.1016/S0079-6425(99)00010-9
- Bai Q, Lin J, Jiang J, Dean TA, Zou J, Tian G. A study of direct forging process for powder superalloys. Materials Science and Engineering: A. 2015;621: 68–75. https://doi.org/10.1016/j.msea.2014.10.039
- López-Báez I, Martínez-Franko E, Zoz H, Trápaga-Martínez LG. Structural evolution of Ni–20Cr alloy during ball milling on elemental powders. Revista Mexicana de Fisica. 2011;57(2): 176–183.
- Dekhil L, Hanneche N, Fellah M, Bououdina M, Mercier AM. Structural analysis and densification study of the mechanically alloyed Cr50Ni50 powders. The International Journal of Advanced Manufacturing Technology. 2020;108: 2515–24. https://doi.org/10.1007/s00170-020-05504-6
- Oleszak D, Portnoy VK, Matyja H. Phase transformations in nanocrystalline mechanically alloyed Ni–Mo powders. Nanostructured Materials. 1999;12: 621–624. https://doi.org/10.1016/S0965-9773(99)00201-9
- Oleszak D, Portnoy VK, Matyja H. Structure of mechanically alloyed Ni–Mo powders. Materials Science Forum. 1999;312–314: 345–50. https://doi.org/10.4028/www.scientific.net/MSF.312-314.345
- Kud I, Ieremenko L, Uvarova I, Zyatkevich D. Features of the solid solution (Mo0.9,Cr0.1)Si2 formation depending on the state of initial mixture. American Journal of Materials Science. 2013;2(6): 202–209. https://doi.org/10.5923/j.materials.20120206.06
- Uvarova I, Kud I, Yeremenko L, Lykhodid L, Ziatkevich D, Yarmola T. Sintering of powders in the CrSi2–Ti(Ta)Si2 systems depending on the methods of synthesis. Journal of the European Ceramic Society. 2010;30(14): 2947–53. https://doi.org/10.1016/j.jeurceramsoc.2010.05.026
- Astakhov EA, Kud IV, Likhoded LS, Zyatkevich DP, Yakovleva MS, Eryomenko LI. Production of powders of the Ni–Cr–Al–Y system alloy doped with silicon by the powder metallurgy method. The Paton Welding Journal. 2010;3(6): 29–32.
- Nash P. The Cr–Ni (chromium–nickel) system. Bulletin of Alloy Phase Diagrams. 1986;7(5): 466–76.
- Hansen M, Anderko K. Constitution of Binary Alloys. New York: McGraw Hill; 1958.
- Samsonov GV. Handbook of the Physicochemical Properties of the Elements. New York: Springer; 1968.
Language: English
Page range: 433 - 442
Submitted on: Jan 21, 2026
Accepted on: May 31, 2026
Published on: Jul 16, 2026
Published by: Bialystok University of Technology
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2026 Iryna Kud, Roman Mediukh, Oleksandr Myslyvchenko, Roman Lytvyn, Larysa Krushynska, Vira Mediukh, Oleksandr Bashta, Pavlo Nosko, Ostap Zgalat-Lozynskyy, published by Bialystok University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.