Thermal Performance Enhancement for Buildings Using Phase Change Materials (PCMs)
References
- Ji R, Zou Z, Chen M, Zheng Y, Qu S. Numerical assessing energy performance for building envelopes with phase change material. Int J Energy Res. 2019;43(12): 6222–6232. Available from: https://doi.org/10.1002/er.4293
- Ismail A, Wang J, Salami BA, Oyedele LO, Otukogbe GK. Microencapsulated phase change materials for enhanced thermal energy storage performance in construction materials: A critical review. Constr Build Mater. 2023;401: 132877. Available from: https://doi.org/10.1016/j.conbuildmat.2023.132877
- Zeng C, Yuan Y, Haghighat F, Panchabikesan K, Joybari MM, Cao X, et al. Application of PCM-based thermal energy storage system in buildings: A state-of-the-art review on the mathematical modeling approaches and experimental investigations. J Therm Sci. 2022;31: 1821–1852. Available from: https://doi.org/10.1007/s11630-022-1628-6
- Osibodu SJ, Adeyinka AM, Mbelu OV. Phase change material integration in concrete for thermal energy storage: Techniques and applications in sustainable building. Sustain Energy Res. 2024;11: 45. Available from: https://doi.org/10.1186/s40807-024-00101-w
- Li G, Bi X, Feng G, Chi L, Zheng X, Liu X. Phase change material Chinese kang: Design and experimental performance study. Renew Energy. 2020;150: 821–830. Available from: https://doi.org/10.1016/j.renene.2020.01.004
- Guan Y, Wang T, Tang R, Hu W, Guo J, Yang H, et al. Numerical study on the heat release capacity of the active-passive phase change wall affected by ventilation velocity. Renew Energy. 2020;150: 1047–1056. Available from: https://doi.org/10.1016/j.renene.2019.11.026
- Johra H, Goupy M, Wittchen KB. Thermal storage capacity in the entire building stock of Denmark for energy flexibility strategies and building-to-grid services. ASHRAE J. 2024;61(1): 14–17.
- Smith J, Brown L. Phase change materials integrated into the building envelope to improve energy efficiency: A review. Fut Cities Environ. 2022;8(1): 1–15. Available from: https://doi.org/10.5334/fce.258
- Habib MA, Rahman MM. Phase change materials for applications in building thermal energy storage: A review. Therm Eng. 2024;71(8): 649–663.
- Han CH. Energy and feasibility analysis of applying bio-based phase change materials to buildings in East Asia. J Green Build. 2020;15(2): 157–181.
- Kazanci B, Cellat K, Paksoy H. Preparation, characterization, and thermal properties of novel fire-resistant microencapsulated phase change materials based on paraffin and a polystyrene shell. RSC Adv. 2020;10(41): 24134–24144. Available from: https://doi.org/10.1039/D0RA03531A
- Sterlyagov S. Increasing the thermal inertia of building walls when using phase change materials. Therm Eng. 2023;70(2): 129–135.
- Li D, Wu Y, Zhang G, Arıcı M, Liu C, Wang F. Influence of glazed roof containing phase change material on indoor thermal environment and energy consumption. Appl Energy. 2018;222: 343–350. Available from: https://doi.org/10.1016/j.apenergy.2018.04.015
- Guarino F, Athienitis A, Cellura M, Bastien D. PCM thermal storage design in buildings: Experimental studies and applications to solaria in cold climates. Appl Energy. 2017;185: 95–106. Available from: https://doi.org/10.1016/j.apenergy.2016.10.046
- Castell A, Martorell I, Medrano M, Pérez G, Cabeza LF. Experimental study of using PCM in brick constructive solutions for passive cooling. Energy Build. 2010;42(4): 534–540. Available from: https://doi.org/10.1016/j.enbuild.2009.10.022
- Sun X, Medina MA, Lee KO, Jin X. Laboratory assessment of residential building walls containing pipe-encapsulated phase change materials for thermal management. Energy. 2018;163: 383–391. Available from: https://doi.org/10.1016/j.energy.2018.08.159
- Ismail KAR, Castro JNC. PCM thermal insulation in buildings. Int J Energy Res. 1997;21(14): 1281–1296. Available from: https://doi.org/10.1002/er.322
- Woods J, Merket N, Benne K, Swindler A, Horowitz S, Macumber D, et al. EnergyPlus™ v.23.2.0 [SWR-17-23]. OS-TI.GOV; 2023.
- Sovetova M, Memon SA, Kim J. Thermal performance and energy efficiency of building integrated with PCMs in hot desert climate region. Sol Energy. 2019;189: 357–371. Available from: https://doi.org/10.1016/j.solener.2019.07.067
- Alam M, Sanjayan J, Wilson J. Energy saving potential of phase change materials in major Australian cities. Energy Build. 2016;121: 23–32. Available from: https://doi.org/10.1016/j.enbuild.2016.03.050
- Lei J, Yang J, Yang EH. Energy performance of building envelopes integrated with phase change materials for cooling load reduction in tropical Singapore. Appl Energy. 2016;162: 207–217. Available from: https://doi.org/10.1016/j.apenergy.2015.10.031
- Jin X, Medina MA, Zhang X. Numerical analysis for the optimal location of a thin PCM layer in frame walls. Appl Therm Eng. 2016;103: 1057–1063. Available from: https://doi.org/10.1016/j.applthermaleng.2016.04.056
- Baniassadi A, Sajadi B, Amidpour M, Noori N. Economic optimization of PCM and insulation layer thickness in residential buildings. Sustain Energy Technol Assess. 2016;14: 92–99. Available from: https://doi.org/10.1016/j.seta.2016.01.008
- Markarian E, Fazelpour F. Multi-objective optimization of energy performance of a building considering different configurations and types of PCM. Sol Energy. 2019;191: 481–496. Available from: https://doi.org/10.1016/j.solener.2019.09.003
- Thiele AM, Jamet A, Sant G, Pilon L. Annual energy analysis of concrete containing phase change materials for building envelopes. Energy Convers Manage. 2015;103: 374–386. Available from: https://doi.org/10.1016/j.enconman.2015.06.068
- Auzeby M, Wei S, Underwood C, Chen C, Ling H, Pan S, et al. Using phase change materials to reduce overheating issues in UK residential buildings. Energy Procedia. 2017;105: 4072–4077. Available from: https://doi.org/10.1016/j.egypro.2017.03.861
- Omari KE, Guer YL, Bruel P. Analysis of micro-dispersed PCM-composite boards behavior in a building’s wall for different seasons. J Build Eng. 2016;7: 361–371. Available from: https://doi.org/10.1016/j.jobe.2016.07.011
- Cui H, Memon SA, Liu R. Development, mechanical properties and numerical simulation of macro encapsulated thermal energy storage concrete. Energy Build. 2015;96: 162–174. Available from: https://doi.org/10.1016/j.enbuild.2015.03.014
- Jin X, Shi D, Medina MA, Shi X, Zhou X, Zhang X. Optimal location of PCM layer in building walls under Nanjing (China) weather conditions. J Therm Anal Calorim. 2017;129(3): 1767–1778. Available from: https://doi.org/10.1007/s10973-017-6302-6
- Khan M, Khan MM, Irfan M, Ahmad N, Haq MA, Khan I, et al. Energy performance enhancement of residential buildings in Pakistan by integrating phase change materials in building envelopes. Energy Reports. 2022;8: 14414–14427. Available from: https://doi.org/10.1016/j.egyr.2022.07.047
Language: English
Page range: 121 - 137
Submitted on: Jun 22, 2025
Accepted on: Dec 29, 2025
Published on: Jul 16, 2026
Published by: Bialystok University of Technology
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2026 Said M. A. Ibrahim, Abdelrahman a. Shaheen, published by Bialystok University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.