The Effect of Geometrical and Material Parameters on the Stress Distribution in Dies Compressed for Extrusion
By: Irena Nowotyńska and Stanisław Kut
References
- Gattmah J, Ozturk F, Orhan S. Effects of Process Parameters on Hot Extrusion of Hollow Tube. Arab J Sci Eng. 2017;42:2021–2030. Available from: https://doi.org/10.1007/s13369-017-2434-1
- Gattmah J, Hussein EA, Jaseem AN, et al. Die angle effect on the generated residual stresses in the inclined and final region during the aluminum extrusion. J Mech Sci Technol. 2024;38: 4277–4286. Available from: https://doi.org/10.1007/s12206-024-0724-6
- Gattmah J. Calculation of relative extrusion pressure for circular section by local coordinates system by using finite element method FEM. Diyala Journal Of Engineering Sciences. 2010;3(2):80-96. Available from: https://doi:10.24237/Djes.2010.03207
- Hu C, Yang F, Zhao Z, Zeng F. Thermoelastic deformation of three-layer combined die under steady-state temperature field. Journal of Thermal Stresses. 2016;39(1):103–119. Available from: https://doi.org/10.1080/01495739.2015.1123958
- Fu MW, Yong MS, Muramatsu T. Die fatigue life design and assessment via CAE simulation. The International Journal of Advanced Manufacturing Technology. 2008;35(9-10):843-851. Available from: https://doi:10.1007/S00170-006-0762-5
- Yeo HT, Choi Y, Hur KD. Analysis and Design of the Prestressed Cold Extrusion Die. Int J Adv Manuf Technol. 2001; 18:54–61. Available from: https://doi.org/10.1007/s001700170094
- Lange K. On the stress distribution in prestressed extrusion dies under non-uniform distribution of internal pressure. International Journal of Mechanical Sciences. 1985;27:169-175.
- Gronostajski Z, Hawryluk M, Jaśkiewicz K, Niechajowicz A, Polak S, Walczak S, Woźniak A. Wpływ tolerancji wykonawczych matryc sprężanych do wyciskania na ich wytężenie. Plasticita materialov. 2007;14:87-92.
- Killmann M, Merklein M. Local prestressing of cold forging tools by reinforcements with adapted interference. Procedia Structural Integrity. 2022;38:212–219. Available from: https://doi.org/10.1016/j.prostr.2022.03.022
- Hawryluk M. Review of selected methods of increasing the life of forging tools in hot die forging processes. Archives of Civil and Mechanical Engineering. 2016;16:845-866. Available from: https://doi.org/10.1016/j.acme.2016.06.001
- Franceschi A, Stahl J, Kock C, et al. Strategies for residual stress adjustment in bulk metal forming. Arch Appl Mech. 2021;91:3557–3577. Available from: https://doi.org/10.1007/s00419-021-01903-7
- Volk W, Vogt S, Stahl J, Prauser S. Introduction to residual stresses in production technology. Prod. Eng. Res. Devel. 2019. Available from: https://doi.org/10.1007/s11740-019-00881-8
- Pape F, Coors T, Poll G. Studies on the Influence of Residual Stresses on the Fatigue Life of Rolling Bearings in Dependence on the Production Processes. Front. Mech. Eng. 2020;6. Available from: https://doi.org/10.3389/fmech.2020.00056
- Pape, F., Neubauer, T., Maiß, O., Denkena, B., and Poll, G. Influence of residual stresses introduced by manufacturing processes on bearing endurance time. Tribol. Lett. 65:70. 2017 doi: 10.1007/s11249-017-0855-3
- Landkammer, P., Jobst, A., Kiener, C., Steinmann, P., Merklein, M. Investigations on residual stress generation in full-forward-extrusion. Prod. Eng. Res. Devel. 2019. Available from: https://doi.org/10.1007/s11740-019-00892-5
- Li Z, Zeng F, Zhao Z, et al. Optimized Design for a Combined Die with Two Stress Rings in Cold Forging Considering Thermal-Mechanical Effects. J. Shanghai Jiaotong Univ. (Sci.) 2020;25:304–314. Available from: https://doi.org/10.1007/s12204-019-2150-y
- Engel UJ, Groenbaek C, Hinsel T, Kroiß M, Meidert R, Neher, F, Räuchle T, Schrader. Tooling solutions for challenges in cold forging. In: Eder, W. K. (Ed.). UTF Science III, Meisenbach, Bamberg, 2011.
- Hsia SY, Shih PY. Wear improvement of tools in the cold forging process for long hex flange nuts. Materials. 2015;8:6640-6657. Available from: https://doi:10.3390/ma8105328
- Killmann M, Merklein M. Analysis of stress pins for the local prestressing of cold forging tools. Production Engineering. 2021;15:119-131. Available from: https://doi.org/10.1007/s11740-020-01012-4
- Ku TW. A study on two-stage cold forging for a drive shaft with internal spline and spur gear geometries. Metals. 2018;8:953. Available from: https://doi:10.3390/met8110953
- Gorenbaek J, Lund E. Tool optimization by means of effective prestressing system. Conference AsiaForge, New Delhi, India 2008.
- Sarooh MA, Lee HC, Im YT, Choi SW, Lee D.L. High cycle fatigue life prediction of cold forging tools based on workpiece material property. Journal of Material Processing Technology. 2007;191:171–181.
- Lee HC, Saroosh MA, Song JH, Im Y. The effect of shrink fitting ratios on tool life in bolt forming processes. Journal of Material Processing Technology. 2009;209:3766–3775.
- Yurtdad S, Ince U, Kilicaslan C, Yildiz H. A case study for improving tool life in cold forging: carbon fiber composite reinforced dies. Journal of Research on Engineering Structures and Materials. 2017;3(1): 65–75.
- Joun MS, Lee MC, Park JM. Finite element analysis of prestressed die set in cold forging. International Journal of Machine Tools & Manufacture. 2002;42:1213–1222.
- Zimpel J. Obliczanie matryc wzmacnianych jednym pierścieniem. Obróbka Plastyczna Metali. 1996;7:43-56.
- Falk B, Engel U, Geiger M. Estimation of tool life in bulk metal forming based on different failure concepts. Journal of Materials Processing Technology. 1998;80-81:602-607. Available from: https://doi.org/10.1016/S0924-0136(98)00168-X
- Fu MW, Yong MS. Muramatsu T. Die fatigue life design and assessment via CAE simulation. The International Journal of Advanced Manufacturing Technology. 2008;35:843-851.
- Kawahara J, Matsumoto R, Mori S, Osakada K. Predicting fatigue life of carbide tool using elastic-plastic FEM. Proceedings of the 44th International Cold Forging Group Plenary Meeting, 55–5, 2011.
- Wang Ch, Kam H, Wang X. Determination of shrink fitting ratio to improve fatigue life of 2-layer compound forging die by considering elasto-plastic deformation of outer ring. Procedia Manufacturing. 2018;15:481–487. Available from: https://doi:10.1016/j.promfg.2018.07.256
- Knoerr M, Lange K, Altan T. Fatigue failure of cold forging tooling: causes and possible solutions through fatigue analysis. Journal of Material Processing Technology. 1994;46:57-71. Available from: https://doi:10.1016/0924-0136(94)90102-3
- Koch J, Völkl R, Engel U. Effective Stochastic Simulation for the Optimization of Time, Costs and Quality in Cold Forging. International Journal of Material Forming. 2008;1:9-25. Available from: https://doi:10.1007/S12289-008-0059-3
- Garat V, Bernhart G, Hervy L. Influence of design and process parameters on service life of nut hot forging die. International Journal of Material Forming. 2004;147:359-369. Available from: https://doi:10.1016/j.jmatprotec.2003.01.002
- Jin JS, Xia JC, Wang XY, Guo-an H, Liu H. Die design for cold precision forging of bevel gear based on finite element method. Journal of Central South University of Technology. 2009;16:546-551.
- Hur KD, Choi Y, Yeo H-T. Design for stiffness reinforcement in backward extrusion die. Journal of Materials Processing Technology. 2002;130–131:411-415. Available from: https://doi.org/10.1016/S0924-0136(02)00721-5
- Hur KD, Choi Y, Yeo HT. A design method for cold backward extrusion using FE analysis. Finite Elements in Analysis and Design. 2003;40:173-185. Available from: https://doi.org/10.1016/S0168-874X(02)00222-6
- Krušič V. Improvement of product accuracy and tool life at precise cold forming by suitable die prestressing. RMZ – Materials and Geoenvironment. 2010;57:465-474.
- Bonnavand F, Bramley AN, Mynors DJ. A fast new numerical tool for designing prestressed dies for backward extrusion Part 2. Numerical analysis. Journal of Engineering Manufacture. 2001;215(B2):169-179. Available from: https://doi.org/10.1243/0954405011515271
- Bingöl S, Ayer O, Altinbalik T. Extrusion load prediction of gear-like profile for different die geometries using ANN and FEM with experimental verification. The International Journal of Advanced Manufacturing Technology. 2015;76(5):983-992. Available from: https://doi:10.1007/s00170-014-6328-z
- Farzad H, et al. An investigation of die profile effect on die wear of plane strain extrusion using incremental slab method and finite element analysis. Int. J. Adv. Manuf. Technol. 2020.
- Kut S, Nowotyńska I. The Impact of Prestressed die Construction with Cemented Carbide Insert on Stress Distribution During Extrusion. Acta Mechanica Slovaca. 2019;23(4):30-36. Available from: https://doi.org/10.21496/ams.2020.004
- Chitkara NR, Aleem A. Axi-symmetric tube extrusion/piercing using die-mandrel combinations: same experiments and a generalized upper bound analysis. International Journal of Mechanical Sciences. 2001;43:1685-1709. Available from: https://doi.org/10.1016/S0020-7403(00)00088-6
- Kong LX, Hodgson PD. Constitutive modelling of extrusion of lead with cyclic torsion. Materials Science and Engineering A. 2000;276:32-38. Available from: https://doi.org/10.1016/S0921-5093(99)00511-0
- Lee HI, Hwang BC, Bae WB. A UBET analysis of non-axisymmetric forward and backward extrusion. Journal of Materials Processing Technology. 2001;113:103-108. Available from: https://doi.org/10.1016/S0924-0136(01)00666-5
- Pater Z. Ołów jako materiał modelowy do symulacji procesów obróbki plastycznej na gorąco. Obróbka Plastyczna Metali. 2003;4:41-48.
- Cwajna J, Roskosz S. Effect of microstructure on properties of sintered carbides. Materials Characterization. 2001;46:197–201. Available from: https://doi:10.1016/S1044-5803(01)00124-3
- Kut S, Nowotyńska I. Comparative numerical analysis of die wear during extrusion process of metals with different properties. Hutnik - Wiadomości Hutnicze. 2011;11:925-929. Available from: https://www.engineeringtoolbox.com
- MSC Software: MSC. Marc Volume B: Element Library,Version; 2020.
Language: English
Page range: 101 - 110
Submitted on: Dec 31, 2024
Accepted on: Jul 10, 2025
Published on: Jul 16, 2026
Published by: Bialystok University of Technology
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2026 Irena Nowotyńska, Stanisław Kut, published by Bialystok University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.