References
- 1. Malik A, Maheshwari A, Dorr LD. Impingement with total hip replacement. J Bone Joint Surg Am. 2007; 89: 1832-42.
- 2. Birman MV, Noble PC, Conditt MA, Li S, Mathis KB.
- Cracking and impingement in ultra-high-molecularweight polyethylene acetabular liners. J Arthroplasty. 2005; 20:87-92.
- 3. Furmanski J, Anderson M, Bal S, Greenwald AS, Halley D, Penenberg B, et al. Clinical fractur of cross-linked UHMWPE acetabular liners. Biomaterials. 2009; 30:5572-82.10.1016/j.biomaterials.2009.07.013
- 4. Tower SS, Currier JH, Currier BH, Lyford KA, Van Citters DW, Mayor MB. Rim cracking of the crosslinked longevity polyethylene acetabular liner after total hip arthroplasty. J Bone Joint Surg Am. 2007; 89: 2212-7.
- 5. Miki H, Yamanashi W, Nishii T, Sato Y, Yoshikawa H, Sugano N. Anatomic hip range of motion after implantation during total hip arthroplasty as measured by a navigation system. J Arthroplasty. 2007; 22: 946-52.10.1016/j.arth.2007.02.004
- 6. Matsushita A, Nakashima Y, Jingushi S, Yamamoto T, Kuraoka A, Iwamoto Y. Effects of the femoral offset and the head size on the safe range of motion in total hip arthroplasty. J Arthroplasty. 2009; 24:646-51.10.1016/j.arth.2008.02.008
- 7. Hemmerich A, Brown H, Smith S, Marthandam SS, Wyss UP. Hip, knee, and ankle kinematics of high range of motion activities of daily living. J Orthop Res. 2006; 24:770-81.10.1002/jor.20114
- 8. Tanino H, Ito H, Harman MK, Matsuno T, Hodge WA, Banks SA. An in vivo model for intraoperative assessment of impingement and dislocation in total hip arthroplasty. J Arthroplasty. 2008; 23:714-20.10.1016/j.arth.2007.07.004
- 9. Scifert CF, Brown TD, Lipman JD. Finite element analysis of a novel design approach to resisting total hip dislocation. Clinical Biomechanics. 1999; 14: 697-703.10.1016/S0268-0033(99)00054-6
- 10. Bergmann G, Deuretzbacher G, Heller M, Graichen F, Rohlmann A, Strauss J, Duda GN. Hip contact forces and gait patterns from routine activities. J Biomech. 2001; 34:859-71.10.1016/S0021-9290(01)00040-9