References
- Alrasheed, M., & Mourshed, M. (2023). Domestic overheating risks and mitigation strategies: The state-of-the-art and directions for future research. Indoor and Built Environment, 32(6), 1057–1077. 10.1177/1420326x231153856
- Aly, A. A., & William, O. B. (2018). An approach towards achieving net-zero energy buildings based on a stochastic tenant model. In Proceedings of eSim 2018: 10th Conference of IBPSA-Canada.
May 2018 .https://publications.ibpsa.org/conference/paper/?id=esim2018_2-1-A-4 - ASHRAE. (2023). ASHRAE guideline 14-2023: Measurement of energy, demand, and water savings. American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE).
https://webstore.ansi.org/standards/ashrae/ashraeguideline142014?srsltid=AfmBOooKZcX9cqK49QB6h5pFU5gtsX5z0ldczx5Bxf0pzWDSeA7FhXf5 - Aste, N., Adhikari, R. S., Buzzetti, M., Del Pero, C., Huerto-Cardenas, H. E., Leonforte, F., & Miglioli, A. (2022). nZEB: Bridging the gap between design forecast and actual performance data. Energy and Built Environment, 3(1), 16–29. 10.1016/j.enbenv.2020.10.001
- Baba, F. M., Ge, H., Wang, L., & Zmeureanu, R. (2022). Do high energy-efficient buildings increase overheating risk in cold climates? Causes and mitigation measures required under recent and future climates. Building and Environment, 219,
109230 . 10.1016/j.buildenv.2022.109230 - Balcomb, J. D., & Jones, R. W. (1980/82). Passive solar design handbook—Passive solar design analysis. US Government Printing Office. Los Alamos National Laboratory & The Ohio State University.
- Beausoleil-Morrison, I. (2019). Learning the fundamentals of building performance simulation through an experiential teaching approach. Journal of Building Performance Simulation, 12(3), 308–325. 10.1080/19401493.2018.1479773
- Berger, C., Santos, L., & Hellwig, R. T. (2024). Pedagogical insights of using urban and building performance simulation in a problem-based learning context. E3S Web of Conference, 562,
06002 . 10.1051/e3sconf/202456206002 - Bianco, F., Degerfeld, M., Ballarini, I., & Corrado, V. (2023). A comparative analysis of simplified and detailed modelling procedures for the assessment of chiller efficiency in the European context. In Building Simulation 2023: 18th Conference of IBPSA, Shanghai, China. 10.26868/25222708.2023.1664
- Blocken, B., Stathopoulos, T., & van Beeck, J. P. A. J. (2016). Pedestrian-level wind conditions around buildings: Review of wind-tunnel and CFD techniques and their accuracy for wind comfort assessment. Building and Environment, 100, 50–81. 10.1016/j.buildenv.2016.02.004
- Bordass, B., & Leaman, A. (2013). A new professionalism: Remedy or fantasy? Building Research & Information, 41(1), 1–7. 10.1080/09613218.2012.750572
- Bordass, B., Leaman, A., & Ruyssevelt, P. (2001). Assessing building performance in use 5: Conclusions and implications. Building Research & Information, 29(2), 144–157. 10.1080/09613210010008054
- Bordass, B., Robert, C., & Field, J. (2004). Energy performance of non-domestic buildings: Closing the credibility gap. In Building Performance Congress, Frankfurt, Germany.
- Bourgeois, D. (2005).
Detailed occupancy prediction, occupancy-sensing control and advanced behavioural modelling within whole-building energy simulation (doctoral thesis, Université Laval).https://hdl.handle.net/20.500.11794/18054 - Box, G. E. (1979).
Robustness in the strategy of scientific model building . In Robustness in statistics (pp. 201–236). Elsevier. - Box, G. E. P. (1976). Science and statistics. Journal of the American Statistical Association, 71, 791–799.
- Brembilla, E., Mardaljevic, J., & Mylona, A. (2019). Improving solar data in CIBSE climate files—Survey of measuring networks and test on daylight simulation. In Conference contribution, Loughborough University. 10.26868/25222708.2019.210800
- Cherrill, G. (2024).
Tools to assess the risk of surface mould growth and condensation from timber thermal bridges (doctoral thesis, Te Herenga Waka–Victoria University Wellington). 10.26686/wgtn.26889502 - Clarke, J. A., & Hensen, J. L. M. (2015). Integrated building performance simulation: Progress, prospects and requirements. Building and Environment, 91, 294–306. 10.1016/j.buildenv.2015.04.002
- Coakley, D., Raftery, P., & Keane, M. (2014). A review of methods to match building energy simulation models to measured data. Renewable and Sustainable Energy Reviews, 37, 123–141. 10.1016/j.rser.2014.05.007
- Cohen, R., & Bordass, B. (2015). Mandating transparency about building energy performance in use. Building Research & Information, 43(4), 534–552. 10.1080/09613218.2015.1017416
- Cory, S., Lenoir, A., & Donn, M. (2011). Formulating a building climate classification method. In Proceedings of Building Simulation 2011: 12th Conference of IBPSA, BS 2011, Sydney, NWW, Australia,
14–16 November 2011 . 10.26868/25222708.2011.1550 - de Wilde, P. (2014). The gap between predicted and measured energy performance of buildings: A framework for investigation. Automation in Construction, 41, 40–49. 10.1016/j.autcon.2014.02.009
- Del Ama Gonzalo, F., Moreno Santamaría, B., & Montero Burgos, M. J. (2023). Assessment of building energy simulation tools to predict heating and cooling energy consumption at early design stages. Sustainability, 15,
1920 . 10.3390/su15031920 - Donn, M. (1999). Quality assurance-simulation and the real world. In Proceedings of Building Simulation 1999: 6th Conference of IBPSA, Kyoto, Japan. 10.26868/25222708.1999.P-05
- Donn, M. (2004).
Simulation of imagined realities: Environmental design decision support tools in architecture (thesis, Te Herenga Waka––Victoria University Wellington).http://researcharchive.vuw.ac.nz/handle/10063/136 - Donn, M., & Thomas, G. (2010). Designing comfortable homes: Guidelines on the use of glass mass and insulation for energy efficiency, 2nd edn. EECA & CCANZ.
https://natlib.govt.nz/records/21761406 - Eley, C., Arent, J., Stanescu, D., Salinas, K., & Goodrich, K. (2009). Rethinking percent savings—The problem with percent savings and the new scale for a zero net-energy future. S. C. Edison.
- Eley, C., Higa, R., Goodrich, K., Arent, J., & Rauss, D. (2011). Rethinking percent savings—The problem with percent savings and zEPI: The new scale for a net zero energy future. ASHRAE Transactions, 117, 787–800.
https://research.ebsco.com/c/nz2l2j/search/details/o74o4uimcn?db=afh - EQUA Simulation. (2025). IDA ICE.
https://www.equa.se/en/ida-ice - Escandón, R., Suárez, R., Alonso, A., & Mauro, G. M. (2022). Is indoor overheating an upcoming risk in southern Spain social housing stocks? Predictive assessment under a climate change scenario. Building and Environment, 207,
108482 . 10.1016/j.buildenv.2021.108482 - Evans, M., Roshchanka, V., & Graham, P. (2017). An international survey of building energy codes and their implementation. Journal of Cleaner Production, 158, 382–389. 10.1016/j.jclepro.2017.01.007
- Feist, W., & Schnieders, J. (2009). Energy efficiency—A key to sustainable housing. European Physical Journal Special Topics, 176(1), 141–153. 10.1140/epjst/e2009-01154-y
- Fernandez-Antolin, M.-M., del Río, J. M., & Gonzalez-Lezcano, R.-A. (2022). Building performance simulation tools as part of architectural design: Breaking the gap through software simulation. International Journal of Technology and Design Education, 32(2), 1227–1245. 10.1007/s10798-020-09641-7
- Foroushani, S., Bernhardt, R., & Bernhardt, M. (2022). On the use of the reference building approach in modern building energy codes. Energy and Buildings, 256,
111726 . 10.1016/j.enbuild.2021.111726 - Fritsch, R., Kohler, A., Nygård-Ferguson, M., & Scartezzini, J.-L. (1990). A stochastic model of user behaviour regarding ventilation. Building and Environment, 25(2), 173–181. 10.1016/0360-1323(90)90030-U
- Galvin, R. (2014). Making the ‘rebound effect’ more useful for performance evaluation of thermal retrofits of existing homes: Defining the ‘energy savings deficit’ and the ‘energy performance gap’. Energy and Buildings, 69, 515–524. 10.1016/j.enbuild.2013.11.004
- Goulden, S., Erell, E., Pearlmutter, D., & Garb, Y. (2020). Embracing uncertainty in building energy efficiency policy: A case study of a building energy standard. Energy Policy, 139,
111303 . 10.1016/j.enpol.2020.111303 - Hand, J. W., Crawley, D. B., Donn, M., & Lawrie, L. K. (2008). Improving non-geometric data available to simulation programs. Building and Environment, 43(4), 674–685. 10.1016/j.buildenv.2006.06.022
- Hawkes, D. (1975). A history of models of the environment in buildings (Working Paper). Centre for Land Use and Built Form Studies.
- Hensen, J. L. M., & Djunaedy, E. (2005). Building simulation for making the invisible visible—Air flow in particular. In Popiolek, Z. (Ed.), Proceedings of the International Conference on Energy Efficient Technologies in Indoor Environment,
29–30 September 2005 ,Silesian Technical University , Poland.https://pure.tue.nl/ws/portalfiles/portal/2267389/731193239041671.pdf - Hu, K., Yan, C., Xu, C., Li, W., Ye, J., Gong, Y., & Xu, Y. (2024). Strategies for grid-friendly and uncertainty-adaptive design in zero energy buildings. Energy and Buildings, 307,
113967 . 10.1016/j.enbuild.2024.113967 - Hunt, D. R. G. (1980). Predicting artificial lighting use—A method based upon observed patterns of behaviour. Lighting Research & Technology, 12(1), 7–14. 10.1177/096032718001200102
- IES. (2025). IES virtual environment.
https://www.iesve.com/software/virtual-environment - Imam, S., Coley, D. A., & Walker, I. (2017). The building performance gap: Are modellers literate? Building Services Engineering Research and Technology, 38(3), 351–375. 10.1177/0143624416684641
- Iversen, A. (2013).
Detailed simulations of lighting conditions in office rooms lit by daylight and artificial light (doctoral thesis).https://orbit.dtu.dk/en/publications/detailed-simulations-of-lighting-conditions-in-office-rooms-lit-b - Judkoff, R. D. (1985). International Energy Agency building simulation comparison and validation study. In Proceedings of Building Simulation 1985: Conference of IBPSA,
August 1985 (pp. 264–272).https://publications.ibpsa.org/conference/paper/?id=bs1985_264_272 - Kalpkirmaz Rizaoglu, I., & Karsten, V. (2020). Building performance simulation to stimulate architectural early design. In PLEA 2020—Planning post carbon cities, A Coruña Spain.
https://ruc.udc.es/dspace/handle/2183/26695 - Katz, B. F. G., Poirier-Quinot, D., Postma, B. N. J., Thery, D., & Luizard, P. (2018). Objective and perceptive evaluations of high-resolution room acoustic simulations and auralizations. In Euronoise 2018, Crete, Greece.
https://www.researchgate.net/profile/Bart-Postma-2/publication/335974064_Objective_and_perceptive_evaluations_of_high-resolution_room_acoustic_simulations_and_auralizations/links/5d87dc00299bf1996f935beb/Objective-and-perceptive-evaluations-of-high-resolution-room-acoustic-simulations-and-auralizations.pdf - Khalid, H., Donn, M., & Merwood-Salisbury, J. (2024). Lessons learned from calibrating the simulation model using measured data. In Harmony in Architectural Science and Design: Sustaining the Future, Griffith University, QLD, Australia.
https://archscience.org/paper/lessons-learned-from-calibrating-the-simulation-model-using-measured-data/ - Lewis, A. (2017). The mathematisation of daylighting: a history of British architects’ use of the daylight factor. Journal of Architecture, 22(7), 1155–1177. 10.1080/13602365.2017.1376342
- Li, J. (2021).
Urban microclimate analysis for high performance office buildings (doctoral thesis, Te Herenga Waka–Victoria University of Wellington).https://openaccess.wgtn.ac.nz/articles/thesis/Urban_Microclimate_Analysis_for_High_Performance_Office_Buildings/17151914 - López-Cabeza, V. P., Eduardo, D.-M., Carlos, R.-G., Carmen, G.-M., & Samuelson, H. W. (2022). Thermal comfort modelling and empirical validation of predicted air temperature in hot-summer Mediterranean courtyards. Journal of Building Performance Simulation, 15(1), 39–61. 10.1080/19401493.2021.2001571
- Maamari, F., Fontoynont, M., Tsangrassoulis, A., Marty, C., Kopylov, E., & Sytnik, G. (2005). Reliable datasets for lighting programs validation—Benchmark results. Solar Energy, 79(2), 213–215.
http://www.sciencedirect.com/science/article/B6V50-4FFTP41-3/2/68e2680a563f1eb7960a0002201ce4e1 - Mardaljevic, J., Brembilla, E., & Eames, M. (2025). Daylight solar radiation AMY data derived from satellite remote sensing: Validation against ground measurements and comparison with TMYs. Building Services Engineering Research & Technology. 10.1177/01436244251335160
- Marshall, A., Fitton, R., Swan, W., Farmer, D., Johnston, D., Benjaber, M., & Ji, Y. (2017). Domestic building fabric performance: Closing the gap between the in situ measured and modelled performance. Energy and Buildings, 150, 307–317. 10.1016/j.enbuild.2017.06.028
- Molina, G., Donn, M., Johnstone, M.-L., & MacGregor, C. (2023). The feeling of comfort in residential settings I: A qualitative model. Buildings & Cities, 4(1), 422–440. 10.5334/bc.322
- Mylonas, A., Tsangrassoulis, A., & Pascual, J. (2024). Modelling occupant behaviour in residential buildings: A systematic literature review. Building and Environment, 265,
111959 . 10.1016/j.buildenv.2024.111959 - Naish, D., Tan, A. C. C., & Demirbilek, F. N. (2011). A review of road traffic noise indicators and their correlation with the L A10(18hour). In ACOUSTICS 2011,
2–4 November 2011 .https://www.acoustics.asn.au/conference_proceedings/AAS2011/papers/p6.pdf - Natephra, W., Motamedi, A., Fukuda, T., & Yabuki, N. (2017). Integrating building information modeling and virtual reality development engines for building indoor lighting design. Visualization in Engineering, 5(1),
19 . 10.1186/s40327-017-0058-x - National Institute of Building Sciences. (2017). Implementing an outcome-based compliance path in energy codes: Guidance for cities.
https://nibs.org/wp-content/uploads/2025/04/NIBS_OBP_CityLevelGuide_2017.pdf - Olanrewaju, O. (2025).
Data quality assurance in construction environmental product declarations for whole building life cycle assessment (doctoral thesis, Te Herenga Waka–Victoria University of Wellington). 10.26686/wgtn.28930454 - Olgyay, V., & Olgyay, A. (1963). Design with climate: Bioclimatic approach to architectural regionalism. Princeton University Press.
- Page, J., Robinson, D., Morel, N., & Scartezzini, J. L. (2008). A generalised stochastic model for the simulation of occupant presence. Energy and Buildings, 40(2), 83–98. 10.1016/j.enbuild.2007.01.018
- Pears, A., Gilchris, G., Gordon, A., lsaacs, N., & Bannister, P. (1999). Walking where angels fear to tread: SEDA’s Office Building Greenhouse Rating Scheme. In 37th Annual Conference of the Australian and New Zealand Solar Energy Society—Opportunities in a Competitive Marketplace, Deakin University, Melbourne, VIC, Australia,
1–4 December 1999 . - Perez, R., Ineichen, P., Moore, K., Kmiecik, M., Chain, C., George, R., & Vignola, F. (2002). A new operational model for satellite-derived irradiances: Description and validation. Solar Energy, 73(5), 307–317. 10.1016/S0038-092X(02)00122-6
- Perez, R., Seals, R., & Michalsky, J. (1993). All-weather model for sky luminance distribution—Preliminary configuration and validation. Solar Energy, 50(3), 235–245. 10.1016/0038-092X(93)90017-I
- Pierson, C., Wienold, J., & Bodart, M. (2018). Review of factors influencing discomfort glare perception from daylight. Leukos, 14(3), 111–148. 10.1080/15502724.2018.1428617
- Postma, B., & Katz, B. (2017). Influence of visual rendering on the acoustic judgments of a theater auralization. Journal of the Acoustical Society of America, 141, 3934–3934. 10.1121/1.4988901
- Precious, B. (2022). Energy efficiency in commercial buildings—How the National Australian Built Environment Rating System transformed the market. Australian Government Depertment of Industry, Science Energy and Resources.
https://www.nabers.gov.au/sites/default/files/2022-11/Energy%20Efficiency%20in%20Commercial%20Buildings%20-%20Full%20Length%20Guide_0.pdf - Raftery, P., Keane, M., & Costa, A. (2011). Calibrating whole building energy models: Detailed case study using hourly measured data. Energy and Buildings, 43(12), 3666–3679. 10.1016/j.enbuild.2011.09.039
- Raslan, R. (2010).
Performance based regulations: The viability of the modelling approach as a methodology for building energy compliance demonstration (doctoral dissertation, University College London).https://discovery.ucl.ac.uk/id/eprint/134389/1/134389_RMSR.pdf ;https://discovery.ucl.ac.uk/id/eprint/134389/ - Raslan, R., Davies, M., & Doylend, N. (2009). An analysis of results variability in energy performance compliance verification tools. In Eleventh International IBPSA Conference Glasgow, UK,
27–30 July 2009 .https://publications.ibpsa.org/conference/paper/?id=bs2009_0561_568 ;https://www.aivc.org/resource/analysis-results-variability-energy-performance-compliance-verification-tools - Reinhart, C. F., & Walkenhorst, O. (2001). Validation of dynamic RADIANCE-based daylight simulations for a test office with external blinds. Energy and Buildings, 33(7), 683–697. 10.1016/S0378-7788(01)00058-5
- Robinson, J., & Cole, R. J. (2015). Theoretical underpinnings of regenerative sustainability. Building Research & Information, 43(2), 133–143. 10.1080/09613218.2014.979082
- Rosenberg, M., & Hart, R. (2014). Roadmap toward a predictive performance-based commercial energy code. In ACEEE Summer Study on Energy Efficiency in Buildings, Pacific Grove CA, US.
https://www.aceee.org/files/proceedings/2014/data/papers/8-707.pdf - RWDI. (2019). Wind microclimate guidelines for developments in the City of London
https://www.cityoflondon.gov.uk/assets/Services-Environment/wind-microclimate-guidelines.pdf - Schwartz, Y., & Raslan, R. (2013). Variations in results of building energy simulation tools, and their impact on BREEAM and LEED ratings: A case study. Energy and Buildings, 62, 350–359. 10.1016/j.enbuild.2013.03.022
- Serag, H., Mahmoud, M., Kamel, T., & Fahmy, A. (2024). Comparative validation of a building energy model calibration methodology with a focus on residential buildings. Civil Engineering and Architecture, 12, 1447–1462. 10.13189/cea.2024.120314
- Soebarto, V. (2019). Evaluation of the use of building performance simulation for architectural design studio projects. In 16th IBPSA Conference, Rome, Italy.
https://publications.ibpsa.org/proceedings/bs/2019/papers/BS2019_210230.pdf - Spataro, K., Bjork, M., & Masteller, M. (2011). Comparative analysis of prescriptive, performance-based and outcome-based energy code systems. Cascadia Green Building Council & Alaska Housing Finance Corporation.
https://www.ahfc.us/application/files/9013/5754/5384/cascadia_code_analysis_071911.pdf - Stathopoulos, T., Wu, H., & Bédard, C. (1992). Wind environment around buildings: A knowledge-based approach. Journal of Wind Engineering and Industrial Aerodynamics, 44(1–3), 2377–2388. 10.1016/0167-6105(92)90028-9
- Stoecklein, A., & Bassett, M. (2000). The ‘annual loss factor’ method. A design tool for energy efficient houses, 3rd edn. Building Research Association of New Zealand (BRANZ).
- Sullivan, J. (2021).
Measuring the effects of light distribution on spatial brightness (thesis, Te Herenga Waka–Victoria University of Wellington). 10.26686/wgtn.16713670.v1 - Tregenza, P. R., & Waters, I. M. (1983). Daylight coefficients. Lighting Research & Technology, 15(2), 65–71. 10.1177/096032718301500201
- US DoE. (2024). EnergyPlus™ version 24.1.10 documentation: Engineering reference. US Department of Energy (US DoE).
https://energyplus.net/assets/nrel_custom/pdfs/pdfs_v24.1.0/EngineeringReference.pdf - US DoE. (2025). EnergyPlus. NREL.
https://energyplus.net/ - Walkenhorst, O., Luther, J., Reinhart, C., & Timmer, J. (2002). Dynamic annual daylight simulations based on one-hour and one-minute means of irradiance data. Solar Energy, 72(5), 385–395. 10.1016/S0038-092X(02)00019-1
- Wang, C., & Kang, J. (2022). Development of acoustic computer simulation for performance spaces: A systematic review and meta-analysis. Building Simulation, 15(10), 1729–1745. 10.1007/s12273-022-0901-4
- Woloszyn, M., & Beausoleil-Morrison, I. (2017). Treating uncertainty in building performance simulation. Journal of Building Performance Simulation, 10(1), 1–2. 10.1080/19401493.2017.1261641
- Wu, Y., Li, W., Zeng, N., & Bai, X. (2025). Analyzing the impact of tall building geometries on wind environment in a hypothetical urban context: A typological and parametric study. In International Conference on Urban Climate, Sustainability and Urban Design, Singapore.
https://link.springer.com/chapter/10.1007/978-981-97-8401-1_40 - Zamarian, P. (2021). William Allen and the ‘scientific outlook’ in architectural education, 1936–66. Architectural History, 64, 379–402.
https://www.cambridge.org/core/services/aop-cambridge-core/content/view/298FF1CA1290533AEFCAF8530DC50858/S0066622X21000150a.pdf/william-allen-and-the-scientific-outlook-in-architectural-education-193666.pdf - Zhang, W., Yan, C., Xu, Y., Fang, J., & Pan, Y. (2022). A critical review of the performance evaluation and optimization of grid interactions between zero-energy buildings and power grids. Sustainable Cities and Society, 86,
104123 . 10.1016/j.scs.2022.104123 - Zheng, Z., Zhou, J., Jiaqin, Z., Yang, Y., Xu, F., & Liu, H. (2024). Review of the building energy performance gap from simulation and building lifecycle perspectives: Magnitude, causes and solutions. Developments in the Built Environment, 17,
100345 . 10.1016/j.dibe.2024.100345 - Zou, P. X. W., Xu, X., Sanjayan, J., & Wang, J. (2018). Review of 10 years research on building energy performance gap: Life-cycle and stakeholder perspectives. Energy and Buildings, 178, 165–181. 10.1016/j.enbuild.2018.08.040