PARAMETRIC ANALYSIS FOR THE DESIGN OF A 4 POLE RADIAL PERMANENT MAGNET GENERATOR FOR SMALL WIND TURBINES

Roberto Quintal-Palomo; Mateusz Dybkowski; Maciej Gwoździewicz

doi:10.5277/ped160211

.blurhash-client-img { display: none !important; }

PARAMETRIC ANALYSIS FOR THE DESIGN OF A 4 POLE RADIAL PERMANENT MAGNET GENERATOR FOR SMALL WIND TURBINES

Power Electronics and Drives

Volume 1 (2016): Issue 2 (December 2016)

By: Roberto Quintal-Palomo, Mateusz Dybkowski and Maciej Gwoździewicz

Open Access

|Oct 2017

Abstract

A review of the literature gives several guidelines for the design of a Permanent Magnet Synchronous Generator (PMSG) for Small Wind Turbines (SWT) applications. This paper presents Finite Element Analysis (FEA) of a Surface Mounted PMSG. Several optimization tests are run in order to yield the lowest Total Harmonic Distortion (THD) and cogging torque with the highest induced voltage. The results of the optimization tests are then utilized to design an initial “optimized” circumferential Internal PMSG. This optimized design is then compared to a non-optimized design, as well as the results of the Surface Mounted PMSG.

References

[1] MALINOWSKI M., MILCZAREK A., KOT R., GORYCA Z., SZUSTER J.T., Optimized Energy-Conversion Systems for Small Wind Turbines: Renewable energy sources in modern distributed power generation systems, IEEE Power Electronics Magazine, Sept. 2015, 2, 3, 16-30.
Search in Google Scholar Back to article
[2] WANG Y., XU L., Peak Power Improvement of Interior Permanent Motor for Electrified Vehicles, IEEE Electrification Magazine, June 2014, 2, 2, 25-30. 10.1109/MELE.2014.2312990
Search in Google Scholar Back to article
[3] EL-REFAIE A.M., Motors/generators for traction/propulsion applications: A review, IEEE Vehicular Technology Magazine, March 2013, 8, 1, 90-99. 10.1109/MVT.2012.2218438
Search in Google Scholar Back to article
[4] EL-REFAIE A.M., Fault-tolerant permanent magnet machines: a review, IET Electric Power Applications, January 2011, 5, 1, 59-74. 10.1049/iet-epa.2009.0117
Open DOI Search in Google Scholar Back to article
[5] POLINDER H., FERREIRA J.A., JENSEN B.B., ABRAHAMSEN A.B., ATALLAH K., MCMAHON R.A., Trends in Wind Turbine Generator Systems, IEEE Journal of Emerging and Selected Topics in Power Electronics, Sept. 2013, 1, 3, 174-185.
Search in Google Scholar Back to article
[6] EL-REFAIE A.M., Fractional-slot concentrated-windings: A paradigm shift in electrical machines, 2013 IEEE Workshop on, Electrical Machines Design Control and Diagnosis (WEMDCD), Paris 2013, 24-32. 10.1109/WEMDCD.2013.6525162
Search in Google Scholar Back to article
[7] BERNATT J., GLINKA T., JAKUBIEC M., KROL E., ROSSA R., Electric motors with permanent magnets with two-zone rotational speed control, International Aegean Conference on Electrical Machines and Power Electronics, ACEMP ’07, Bodrum, 2007, 653-658. 10.1109/ACEMP.2007.4510584
Search in Google Scholar Back to article
[8] SPOONER E., GORDON P., BUMBY J.R., FRENCH C.D., Lightweight ironless-stator PM generators for direct-drive wind turbines, IEE Proceedings - Electric Power Applications, 7 Jan. 2005, 152, 1, 17-26.
Search in Google Scholar Back to article
[9] TUTTELBERG K., VAIMANN T., KALLASTE A., Analysis of a slow-speed slotless permanent magnet synchronous generator, 4th International Youth Conference on Energy (IYCE), 2013, 1-5. 10.1109/IYCE.2013.6604187
Search in Google Scholar Back to article
[10] VALAVI M., NYSVEEN A., NILSSEN R., LORENZ R.D., RØLVÅG T., Influence of Pole and Slot Combinations on Magnetic Forces and Vibration in Low-Speed PM Wind Generators, IEEE Transactions on Magnetics, May 2014, 50, 5, 1-11. 10.1109/TMAG.2013.2293124
Search in Google Scholar Back to article
[11] ROSSI C., CORBELLI P., GRANDI G., W-CVT continuously variable transmission for wind energy conversion system, Power Electronics and Machines in Wind Applications, PEMWA 2009, IEEE, Lincoln, NE, 2009, 1-10. 10.1109/PEMWA.2009.5208399
Search in Google Scholar Back to article
[12] [Online] Available: https://www.technologyreview.com/s/416038/testing-cheap-wind-power/
Search in Google Scholar Back to article
[13] JORGENSEN F.T., ANDERSEN T.O., RASMUSSEN P.O., The Cycloid Permanent Magnetic Gear, IEEE Transactions on Industry Applications, Nov.-Dec. 2008, 44, 6, 1659-1665. 10.1109/TIA.2008.2006295
Open DOI Search in Google Scholar Back to article
[14] ATALLAH K., WANG J., CALVERLEY S.D., DUGGAN S., Design and Operation of a Magnetic Continuously Variable Transmission, IEEE Transactions on Industry Applications, July-Aug. 2012, 48, 4, 1288-1295.
Search in Google Scholar Back to article
[15] GERBER S., WANG R.J., Design and Evaluation of a Magnetically Geared PM Machine, IEEE Transactions on Magnetics, Aug. 2015, 51, 8, 1-10.
Search in Google Scholar Back to article
[16] TAVNER P.J., SPINATO F., VAN BUSSEL G., KOUTOULAKOS E., Reliability of Different Wind Turbine Concepts with Relevance to Offshore Application, European Wind Energy Conference, Scientific Track, Brussels, Belgium, European Wind Energy Association, April 2008.
Search in Google Scholar Back to article
[17] KALLASTE A., VAIMANN T., BELAHCEN A., Possible manufacturing tolerance faults in design and construction of low speed slotless permanent magnet generator, 16th European Conference on Power Electronics and Applications (EPE’14-ECCE Europe), Lappeenranta, 2014, 1-10. 10.1109/EPE.2014.6911027
Search in Google Scholar Back to article
[18] MULJADI E., GREEN J., Cogging Torque Reduction in a Permanent Magnet Wind Turbine Generator, 21st American Society of Mechanical Engineers ASME, Wind Energy Symposium, Reno, Nevada, January 14-17, 2002. 10.2514/6.2002-56
Search in Google Scholar Back to article
[19] CHUNG D., YOU Y., Cogging Torque Reduction in Permanent-Magnet Brushless Generators for Small Wind Turbines, Journal of Magnetics, 2015, 20(2), 176-185. 10.4283/JMAG.2015.20.2.176
Search in Google Scholar Back to article
[20] ROLAK M., KOT R., MALINOWSKI M., GORYCA Z., SZUSTER J.T., Design of Small Wind Turbine with Maximum Power Point Tracking Algorithm, IEEE International Symposium on Industrial Electronics, Gdańsk, 2011, 1023-1028. 10.1109/ISIE.2011.5984300
Search in Google Scholar Back to article
[21] UPADHAYAY P., RAJAGOPAL K.R., Torque ripple reduction using magnet pole shaping in a surface mounted Permanent Magnet BLDC motor, International Conference on Renewable Energy Research and Applications (ICRERA), Madrid, 2013, 516-521. 10.1109/ICRERA.2013.6749809
Search in Google Scholar Back to article
[22] WANG K., ZHU Z.Q., OMBACH G., Torque Improvement of Five-Phase Surface-Mounted Permanent Magnet Machine Using Third-Order Harmonic, IEEE Transactions on Energy Conversion, Sept. 2014, 29, 3, 735-747. 10.1109/TEC.2014.2326521
Open DOI Search in Google Scholar Back to article
[23] ILKA R., ALINEJAD-BEROMI Y., YAGHOBI H., Geometry optimization of five-phase permanent magnet synchronous motors using Bees algorithm, IJEEE Iranian Journal of Electrical & Electronic Engineering, 2015, 11(4), 345-353.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.5277/ped160211 | Journal eISSN: 2543-4292 | Journal ISSN: 2451-0262

Journal RSS Feed

Language: English

Page range: 175 - 186

Submitted on: Jun 27, 2016

Accepted on: Oct 17, 2016

Published on: Oct 27, 2017

Published by: Wroclaw University of Science and Technology

In partnership with: Paradigm Publishing Services

Publication frequency: 1 issue per year

Keywords:

permanent magnet synchronous generator PMSG,

finite element analysis FEA,

small wind turbines SWT

Related subjects:

Computer sciences,

Artificial intelligence,

Engineering,

Electrical engineering,

Electronics

© 2017 Roberto Quintal-Palomo, Mateusz Dybkowski, Maciej Gwoździewicz, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 1 (2016): Issue 2 (December 2016)