STABILITY ANALYSIS OF MRASSCC SPEED ESTIMATOR IN MOTORING AND REGENERATING MODE

Korzonek, Mateusz; Orłowska-Kowalska, Teresa

doi:10.5277/ped160207

Abstract

This paper deals with the stability analysis of MRAS current speed estimator in a motoring and regenerating mode. The unstable operating points of the estimator, mainly in a regenerating mode are widely discussed. The expanded version of the estimator MRASCC is proposed to provide its stability in the whole operating range. The new correction coefficients for two analyzed stabilization methods are proposed. Finally, simulation results confirming the theoretical analysis are presented

References

[1] KAŹMIERKOWSKI M.P., BLAABJERG F., KRISHNAN R., Control in Power Electronic - Selected Problems, Academic Press, USA, 2002.
Search in Google Scholar Back to article
[2] HOLTZ J., Sensorless Control of Induction Machines - With or Without Signal Injection?, IEEE Trans. Industrial Electronics, 2006, 53 (1), 7-30. 10.1109/TIE.2005.862324
Search in Google Scholar Back to article
[3] ORŁOWSKA-KOWALSKA T., Sensorless induction motor drives, Oficyna Wydawnicza PWr, Wrocław 2003, (in Polish).
Search in Google Scholar Back to article
[4] UTKIN V., YAN Z., Sliding mode observers for electronic machines - an overview, Proc. of the 28th Annual Conf. of the Industrial Electronics Society IECON 2002, Sevilla 2002, 3, 2, 1842-1847.
Search in Google Scholar Back to article
[5] BOLDEA I., LASCU C., BLAABJERG F., A class of speed-sensorless sliding-mode observers for highperformance induction motor drives, IEEE Trans. Industrial Electronics, 2009, 56, 9, 3394-3403. 10.1109/TIE.2009.2022518
Open DOI Search in Google Scholar Back to article
[6] KUBOTA H., MATSUSE K., NAKANO T., DSP-based speed adaptive flux observer of induction motor. IEEE Trans. Industry Appl., 1993, 29, 2, 344-348. 10.1109/28.216542
Open DOI Search in Google Scholar Back to article
[7] BOUHENNA A., MANSOUR A., CHENAFA M., BELAIDI A., Feedback Gain Design Method for the Full- Order Flux Observer in Sensorless Control of Induction Motor, International Journal of Computers Communications and Control, 2008, 3, 2, 135-148. 10.15837/ijccc.2008.2.2382
Search in Google Scholar Back to article
[8] BOUHENNA A., CHAIGNE C., BENSIALI N., ETIEN E., CHAMPENOIS G., Design of speed adaptation law in sensorless control of induction motor in regenerating mode, Simulation Modelling Practice and Theory, August 2007, 15, 7, 847-863. 10.1016/j.simpat.2007.04.005
Search in Google Scholar Back to article
[9] ETIEN E., CHAIGNE C., BENSIALI N., On the Stability of Full Adaptive Observer for Induction Motor in Regenerating Mode, IEEE Trans. Ind. Electronics, 2010, 57, 5, 1599-1608. 10.1109/TIE.2009.2032200
Open DOI Search in Google Scholar Back to article
[10] HINKKANEN M., LUOMI J., Stabilization of regenerating-mode operation in sensorless induction motor drives by full-order flux observer design, IEEE Trans. Ind. Electronics, 2004, 51, 6, 1318-1328. 10.1109/TIE.2004.837902
Search in Google Scholar Back to article
[11] HARNEFORS L., HINKKANEN M., Complete stability of reduced-order and full-order observers for sensorless IM drives, IEEE Trans. Ind. Electronics, 2008, 55, 30, 1319-1329. 10.1109/TIE.2007.909077
Search in Google Scholar Back to article
[12] KUBOTA H., SATO I., TAMURA Y. et al., Regenerating-mode low-speed operation of sensorless induction motor drive with adaptive observer, IEEE Trans. Industry Appl., 2002, 38, 4, 1081-1086. 10.1109/TIA.2002.800575
Open DOI Search in Google Scholar Back to article
[13] SUNWANKAWIN S., SANGWONGWANICH S., Design strategy of an adaptive full-order observer for speed-sensorless induction motor drives - Tracking performance and stabilization, IEEE Trans. Industrial Electronics, 2006, 53, 1, 96-119. 10.1109/TIE.2005.862308
Search in Google Scholar Back to article
[14] ABU-RUB H., OIKONOMOU N., Sensorless observer system for induction motor control, Proc. of the IEEE Power Electronics Specialists Conference, Rodos 2008, 30-36. 10.1109/PESC.2008.4591892
Search in Google Scholar Back to article
[15] ORŁOWSKA-KOWALSKA T., DYBKOWSKI M., TARCHAŁA G., Analysis of the chosen estimation methods in the induction motor drives - part I - mathematical models, Scientific Papers of the Institute of Electrical Machines, Drives and Measurements, Studies and Research, 2010, 30, 151-161.
Search in Google Scholar Back to article
[16] DYBKOWSKI M., TARCHAŁA G., ORŁOWSKA-KOWALSKA T., Analysis of the chosen estimation methods in the induction motor drives - part II - research tests, Scientific Papers of the Institute of Electrical Machines, Drives and Measurements, Studies and Research, 2010, 30, 162-175.[17] SCHAUDER C., Adaptive speed identification for vector control of induction motors without rotational transducers, IEEE Trans. on Industry Applications, Sept./Oct. 1992, 28, 5, 1054-1061.
Search in Google Scholar Back to article
[18] TAMAI S. et al., Speed sensorless vector control of induction motor with model reference adaptive system, Proc. of IEEE/IAS, 1987, 189-195.
Search in Google Scholar Back to article
[19] PENG F.Z., FUKAO T., Robust speed identification for speed-sensorless vector control of induction motors, IEEE Trans. on Industry Applications, 1994, 30, 5, 1234-1240. 10.1109/28.315234
Search in Google Scholar Back to article
[20] PENG F.Z., FUKAO T., LAI J.S., Low-speed performance of robust speed identification using instantaneous reactive power for tacholess vector control of induction motors, Proc. IEEE Industry Applications Society Annual Meetings, 1994, 1, 509-514.
Search in Google Scholar Back to article
[21] SOBCZUK D.L., Application of ANN for control of PWM inverter fed induction motor drives, Ph.D. dissertation, Warsaw Univ. Technol, Warsaw, Poland, 1999.
Search in Google Scholar Back to article
[22] ORŁOWSKA-KOWALSKA T., DYBKOWSKI M., Stator current-based MRAS speed estimator for wide range speed-sensorless induction motor drive, IEEE Trans. Ind. Electronics, 2010, 57, 4, 1296-1308. 10.1109/TIE.2009.2031134
Open DOI Search in Google Scholar Back to article
[23] ORŁOWSKA-KOWALSKA T., TARCHAŁA G., Unified approach to the sliding-mode control and state estimation - application to the induction motor drive, Bulletin of the Polish Academy of Sciences. Technical Sciences, 2013, 61, 4, 837-846. 10.2478/bpasts-2013-0090
Search in Google Scholar Back to article
[24] VONKOMER J., ZALMAN M., On the stability of current based MRAS, Proc. of the 39th Annual Conf. of the Industrial Electronics Society IECON 2013, Nov. 2013, 3018-3023.10.1109/IECON.2013.6699611
Search in Google Scholar Back to article

STABILITY ANALYSIS OF MRASSCC SPEED ESTIMATOR IN MOTORING AND REGENERATING MODE

Abstract

Paradigm

My account