Analysis of information content of in-cylinder pressure signal deviations from the mean values

Bąkowski, Andrzej; Radziszewski, Leszek; Świetlik, Paweł; Žmindak, Milan

doi:10.4467/2353737XCT.18.187.9675

.blurhash-client-img { display: none !important; }

Analysis of information content of in-cylinder pressure signal deviations from the mean values

Technical Transactions

Volume 115 (2018): Issue 12 (December 2018)

By: Andrzej Bąkowski, Leszek Radziszewski, Paweł Świetlik and Milan Žmindak

Open Access

|May 2020

Abstract

This paper analyses the option of using pressure signal new descriptors for controlling a selected object. Pressure signal deviations from the pressure mean values were selected to be the example descriptors. Diesel fuelled with mineral- and bio-fuels was chosen to be the reference object. The in-cylinder pressure signal (p_c) was recorded during the combustion process.

References

[1] Bąkowski A., Radziszewski L., Determining selected diesel engine combustion descriptors based on the analysis of the coefficient of variation of in-chamber pressure, “Bulletin of the Polish Academy of Sciences,Technical Sciences”, Vol. 63, No. 2, 2015, 457–464.10.1515/bpasts-2015-0052
Search in Google Scholar Back to article
[2] Bąkowski A., Radziszewski L., Žmindák M., Analysis of selected pressure signal descriptors used to control combustion engine, “Solid State Phenomena”, Vol. 248, 2016, 211–216.10.4028/www.scientific.net/SSP.248.211
Search in Google Scholar Back to article
[3] Delvecchio S., Bonfiglio P., Pompoli F., Vibro-acoustic condition monitoring of Internal Combustion Engines: A critical review of existing techniques, “Mechanical Systems and Signal Processing”, Vol. 99, Issue 1, 2018, 661–683.10.1016/j.ymssp.2017.06.033
Search in Google Scholar Back to article
[4] Łagowski P., Methodology of determining and evaluation of diagnostics parameters of indicated plot for an internal combustion engine, PhD thesis, Kielce University of Technology, Kielce 2010.
Search in Google Scholar Back to article
[5] Maurya R.K., Pal D. D., Agarwal A. K., Digital signal processing of cylinder pressure data for combustion diagnostics of HCCI engine, “Mechanical Systems and Signal Processing” Vol. 36, Issue 1, 2013, 95–109.10.1016/j.ymssp.2011.07.014
Search in Google Scholar Back to article
[6] Pha P. X., Bodisco T. A., Ristovski Z. D., Brown R. J., Masri A. R., The influence of fatty acid methyl ester profiles on inter-cycle variability in a heavy duty compression ignition engine, “Fuel”, Vol. 116, 2014, 140–150.10.1016/j.fuel.2013.07.100
Search in Google Scholar Back to article
[7] Payri F., Lujan J.M., Martin J., Abbad A., Digital signal processing of in-cylinder pressure for combustion diagnosis of internal combustion engines, “Mechanical Systems and Signal Processing”, Vol. 24, Issue 6, 2010, 1767–1784.10.1016/j.ymssp.2009.12.011
Search in Google Scholar Back to article

DOI: https://doi.org/10.4467/2353737XCT.18.187.9675 | Journal eISSN: 2353-737X | Journal ISSN: 0011-4561

Journal RSS Feed

Language: English

Page range: 151 - 158

Submitted on: Nov 13, 2018

Published on: May 23, 2020

Published by: Cracow University of Technology

In partnership with: Paradigm Publishing Services

Publication frequency: 1 issue per year

Keywords:

signal descriptors,

diesel,

control,

combustion,

biofuel

Related subjects:

Architecture and design,

Architecture,

Architects, buildings,

Engineering,

Mechanical engineering,

Mechanics,

Industrial chemistry,

Chemical engineering,

Materials sciences,

Materials sciences, other

© 2020 Andrzej Bąkowski, Leszek Radziszewski, Paweł Świetlik, Milan Žmindak, published by Cracow University of Technology
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 License.

Previous article Volume 115 (2018): Issue 12 (December 2018)Next article