References
- [1] Brózda K., Major M., Selejdak J., Computational Analysis of Serviceability Limit State of Beams Reinforced with FRP Bars, 23th International Conference Engineering Mechanics, Svratka, 15–18 May 2017, 218–221.
- [2] Brózda K., Selejdak J., Koteš P., The Analysis of Beam Reinforced with FRP Bars in Bending, Procedia Engineering, vol. 192, 2016, 64–68.10.1016/j.proeng.2017.06.011
- [3] Bywalski C., Drzazga M., Kamiński M., Obliczanie zginanych elementach zbrojonych prętami FRP, Materiały budowlane, vol. 6, 2014, 72–73.
- [4] Drzazga M., Kamiński M., Pręty kompozytowe FRP jako główne zbrojenie zginanych elementów betonowych – przegląd zaleceń i efektywność projektowania, Przegląd budowlany, vol. 3, 2015, 22–28.
- [5] Brózda K., Selejdak J., Analysis of FRP Bars Used as Reinforcement in Concrete Structures, Production Engineering Archives, vol. 12(3), 2016, 2–4.10.30657/pea.2016.12.01
- [6] Ulewicz R., Mazur M., Fatigue testing structural steel as a factor of safety of technical facilities maintenance, Production Engineering Archives, vol. 1(1), 2013, 32–34.10.30657/pea.2013.01.10
- [7] Selejdak J., Ulewicz R., Ingaldi M., The Evaluation of the Use of a Device for Producing Metal Elements Applied in Civil Engineering, 23rd International Conference on Metallurgy and Materials, Brno, 21–23 May 2014, 1882–1888.
- [8] Lipinski T., Corrosion effect of 20 % NaCl solution on basic carbon structural S235JR steel, 16th International Scientific Conference Engineering for Rural Development, Jelgava, 24–26 May 2017, 1069–1074.10.22616/ERDev2017.16.N225
- [9] Pliszka I., Radek N., Corrosion Resistance of WC–Cu Coatings Produced by Electrospark Deposition, Procedia Engineering, vol. 192, 2017, 707–712.10.1016/j.proeng.2017.06.122
- [10] Szczotok A., Nawrocki J., Pietraszek J., The Impact of the Thickness of the Ceramic Shell Mould on the (γ + γ′) Eutectic in the IN713C Superalloy Airfoil Blade Casting, Archives of Metallurgy and Materials, vol. 62(2), 2017, 587–593.10.1515/amm-2017-0087
- [11] Barris C., Torres L., Miàs C., Vilanova I., Design of FRP reinforced concrete beams for serviceability requirements, Journal of Civil Engineering and Management, vol. 18(6), 2012, 843–857.10.3846/13923730.2012.720934
- [12] Gravina R.J., Smith S.T., Flexural behavior of indeterminate concrete beams reinforced with FRP bars, Engineering Structures, vol. 30, 2008, 2370–2380.10.1016/j.engstruct.2007.12.019
- [13] Toutanji H., Deng Y., Deflection and crack–width prediction of concrete beams reinforced with glass FRP rods, Construction and Building Materials, vol. 17, 2003, 69–74.10.1016/S0950-0618(02)00094-6
- [14] CNR-DT 203/2006. Guide for the Design and Construction of Concrete Structures Reinforced with Fiber-Reinforced Polymer Bars.
- [15] ACI 440.1R-06. Guide for the design and construction of concrete reinforced with FRP bars.
- [16] CSA-S806-02. Design and Construction of Building Components with Fibre Reinforced Polymers.
- [17] JSCE, Recommendation for design and construction of concrete structures using continuous fiber reinforcing materials, Concrete Engineering Series No. 23, 1997.
- [18] Polprek Sp. z o.o. product data sheet, available at: www. polprek.pl (22.12.2016).
- [19] Sireg Geotech S.r.l. product data sheet, available at: www.sireggeotech.it/en (22.12.2016).
- [20] EN 1992-1-1:2004. Design of concrete structures. General rules and rules for buildings.