Additive manufacturing of titanium with application of cold spray process

Żórawski, Wojciech; Kowalski, Szymon; Mądry, Janusz; Sienicki, Jarosław; Góral, Anna; Makrenek, Medard

doi:10.4467/2353737XCT.18.158.9308

.blurhash-client-img { display: none !important; }

Additive manufacturing of titanium with application of cold spray process

Technical Transactions

Volume 115 (2018): Issue 10 (October 2018)

By: Wojciech Żórawski, Szymon Kowalski, Janusz Mądry, Jarosław Sienicki, Anna Góral and Medard Makrenek

Open Access

|May 2020

Abstract

Cold spraying is a new technology which can be used in the area of additive manufacturing. This method is suitable for oxygen-sensitive materials, such as titanium. In this paper the microstructure and mechanical properties of cold sprayed titanium deposit were characterized.

References

[1] Hussain T., McCartney D. G., Shipway P. H., Marrocco T., Corrosion Behavior of Cold Sprayed Titanium Coatings and Free Standing Deposits, J. of Thermal Spray Technology, 260, Volume 20(1-2), January 2011.10.1007/s11666-010-9540-x
Search in Google Scholar Back to article
[2] Cinca N., Barbosa M., Dosta S., Guilemany J.M., Study of Ti deposition onto Al alloy by cold gas spraying, Surface & Coatings Technology, 205, 2010, 1096–1102.10.1016/j.surfcoat.2010.03.061
Search in Google Scholar Back to article
[3] Raoelison R.N., Verdy Ch., Liao H., Cold gas dynamic spray additive manufacturing today: Deposit possibilities, technological solutions and viable applications, Materials and Design, 133, 2017, 266–287.10.1016/j.matdes.2017.07.067
Search in Google Scholar Back to article
[4] Villafuerte J., Considering Cold Sprayfor Additive Manufacturing, Advanced Materials & Processes 50, May 2014, 50–52.
Search in Google Scholar Back to article
[5] Blochet Q., Delloro F., N’Guyen F., Jeulin D., Borit F., Jeandin M., Effect of the Cold-Sprayed Aluminum Coating-Substrate Interface Morphology on Bond Strength for Aircraft Repair Application, J. of Thermal Spray Technology, 26, 2017, 671–686.10.1007/s11666-017-0548-3
Search in Google Scholar Back to article
[6] Papyrin A., Cold Spraying, Elsewier Ltd. 2007.
Search in Google Scholar Back to article
[7] Stoltenhoff T., Voyer M., Kreye H., Cold Spraying – State of the art and applicability, Proceedings of the ITSC 2002, Essen, 366–374.10.31399/asm.cp.itsc2002p0366
Search in Google Scholar Back to article
[8] Kay C. M., J. Karthikeyan, High Pressure Cold Spray, ASM International 2016.10.31399/asm.tb.hpcspa.9781627082853
Search in Google Scholar Back to article
[9] Assadi H., Kreye H., Gartner F., Klassen T., Cold spraying e A materials perspective, Acta Materialia, 116, 2016, 382–407.10.1016/j.actamat.2016.06.034
Search in Google Scholar Back to article
[10] Bae G., Kumar S., Yoon S., Kicheol K., Na H., Kim H., Lee C., Bonding features and associated mechanisms in kinetic sprayed titanium coatings, Acta Materialia, 57, 2009, 5654–5666.10.1016/j.actamat.2009.07.061
Search in Google Scholar Back to article

DOI: https://doi.org/10.4467/2353737XCT.18.158.9308 | Journal eISSN: 2353-737X | Journal ISSN: 0011-4561

Journal RSS Feed

Language: English

Page range: 201 - 207

Submitted on: Sep 27, 2018

Published on: May 21, 2020

Published by: Cracow University of Technology

In partnership with: Paradigm Publishing Services

Publication frequency: 1 issue per year

Keywords:

additive manufacturing,

cold spraying,

titanium

Related subjects:

Architecture and design,

Architecture,

Architects, buildings,

Engineering,

Mechanical engineering,

Mechanics,

Industrial chemistry,

Chemical engineering,

Materials sciences,

Materials sciences, other

© 2020 Wojciech Żórawski, Szymon Kowalski, Janusz Mądry, Jarosław Sienicki, Anna Góral, Medard Makrenek, published by Cracow University of Technology
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 License.

Previous article Volume 115 (2018): Issue 10 (October 2018)