References
- [1] https://www.nikonmetrology.com/en-gb/product/xt-h-225-st (access: 08.06.2018).10.1055/a-0666-5852
- [2] Ratajczyk E., Rentgenowska tomografia komputerowa, CT) do zadań przemysłowych, Pomiary automatyka Robotyka. 5, 2012, 104–113.
- [3] Nałęcz M., Chmielewski L., Kulikowski J.L., Nowakowski A., „Biocybernetyka i inżynieria biomedyczna 2000 - TOM 8 OBRA-ZOWANIE BIOMEDYCZNE, Akademicka Oficyna Wydawnicza EXIT, Warszawa 2003.
- [4] Królikowski M., Burbelko A., Kwaśniewska-Królikowska D., Wykorzystanie tomografii komputerowej w defektoskopii odlewów z żeliwa sferoidalnego, ARCHIVES of FOUNDRY ENGINEERING 15/4, Vol. 14, Special Issue 4, 2014, 71–76.
- [5] Thompson A., McNally D., Maskery I., Leach R.K., X-ray computed tomography and additive manufacturing in medicine: a review, International Journal of Metrology and Quality Engineering, 8, 17, 2017, 1–15.10.1051/ijmqe/2017015
- [6] Hsieh J., Computed Tomography: Principles, Design, Artifacts, and Recent Advances, Bellingham, WA: SPIE Press, 2009.
- [7] Müller P., Hiller J., Cantatore A., and De Chiffre L., A study on evaluation strategies in dimensional X-ray computed tomography by estimation of measurement uncertainties, Int. J. Metrol. Qual. Eng. 3, 2012, 107–115.10.1051/ijmqe/2012011
- [8] Francoa L., Tahocesb P.G., Martínez-Merab J.A., Visualization Software for CT: Fan/Cone Beam and Metrology Applications, Procedia Engineering, Vol. 63, 2013, 779–785.10.1016/j.proeng.2013.08.266
- [9] Heinzl Ch., Analysis and Visualization of Industrial CT Data, Altschwendt: PhD Thesis, 2008.
- [10] Trzciński D., Wysokorozdzielcza tomografia komputerowa, Evertiq Technologie 27.07.2012.
- [11] Świderska A., Zobaczyć niewidzialne – przemysłowa tomografia komputerowa, Magazyn Przemysłowy, Projektowanie i Konstrukcje 01.02.2016.
- [12] Kowaluk T., Ratajczyk E., Wzorce do badania dokładności przemysłowych tomografów komputerowych i przykłady ich zastosowania, MECHANIK, 4, 2015, 291–296.10.17814/mechanik.2015.4.156
- [13] Kruth J.P., Bartscher M., Carmignato S., Schmitt R., De Chiffre L., Weckenmann A., Computed tomography for dimensional metrology, CIRP Ann. Manuf. Technol. 60, 2011, 821–842.10.1016/j.cirp.2011.05.006
- [14] De Chiffre L., Carmignato S., Kruth J.P., Schmitt R., Wecken-mann A., Industrial applications of computed tomography, CIR-PAnn.Manuf.Technol.63, 2014, 655–677.10.1016/j.cirp.2014.05.011
- [15] Thompson A., Maskery I., Leach R.K., X-ray computed tomography for additive manufacturing: a review, Meas. Sci. Technol. 27, 072001, 2016.10.1088/0957-0233/27/7/072001
- [16] Gapiński B., Wieczorowski M., Marciniak-Podsada L., Dybała B., Ziółkowski G., Comparison of different method of measurement geometry using CMM, optical scanner and computed tomography 3D, 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013.10.1016/j.proeng.2014.02.230
- [17] Wieczorowski M., Gapiński B., X-RAY CT IN METROLOGY OF GEOMETRIC FEATUR”, ACTA TEHNICA CORVINIENSIS – Bulletin of Engineering Tome VII Fascicule 1 [January–March], 2014, 95–100.
- [18] Herman G.T., Fundamentals of Computerized Tomography: Image Reconstruction from Projections, Springer, 2009.
- [19] https://jgarantmc.com/how-industrial-ct-scanning-works (access: 08.06.2018).
- [20] Gapinski B., Janicki P., Marciniak-Podsadna L., Jakubowicz M., Application of the computed tomography to control parts made on additive manufacturing process, Procedia Engineering 149, 2016, 105–121.10.1016/j.proeng.2016.06.645