References
- [1] Behrens A., Schafstall H., 2D and 3D simulation of com plex multistage forging processes by use of adaptive friction coefficient, Journal of Materials Processing Technology, 80–81, 1998, 298–303.10.1016/S0924-0136(98)00187-3
- [2] Burgdorf M., Über die Ermittlung des Reibwertes für verfahren der Massivumformung durch den Ringstauchwersuch Ind., Anz. Steel Research, 89, 1967.
- [3] Dassault Systemes, Abaqus Documentation and User Manual, Version 6.12, 2012.
- [4] Essa K., Kacmarcik I., Hartley P., Plancak M., Vilotic D., Upsetting of bi-metallic ring billets, Journal of Materials Processing Technology, 212, 2012, 817–824.10.1016/j.jmatprotec.2011.11.005
- [5] Giezyńska M., Tarcie, zużycie i smarowanie w obróbce plastycznej metali, WNT, Warszawa 1992.
- [6] Herold K., Steigversuch an Flachproben-Ein neuses Verfahren zur Ermittlung des Reibungskoezienten bei Umformvorgangen, Fertigungstechnik und Betrieben, 2, 1968.
- [7] Hojny M., Głowacki M., Opaliński A., Woźniak D., Computer aided design of stamping process technology using the eta/Dynaform 5.8 system, Technical Transactions, vol. 4-M/2011, Cracow Uniwersity of Technology Press.
- [8] Khoei A., Biabanaki S.O.R., Vafa A.R., Yadegaran I., Keshavarz S.H., A new computational algorithm for contact friction modeling of large plastic deformation in powder compaction processes, International Journal of Solids and Structures, 46, 2009.10.1016/j.ijsolstr.2008.08.034
- [9] Kunogi M., A new method of cold extrusion, J. Sci. Res. Inst., 50, 1956, 215–246.
- [10] Lacki P., Simulation of friction in upsetting process, International Journal of Applied Mechanics and Engineering, 9, 2004, 247–253.
- [11] Lacki P., Zastosowanie wybranych modeli tarcia w numerycznej analizie procesów obróbki plastycznej, Konferencja nt. „Informatyka w technologii metali” 11–14 stycznia 2004, Wyd. Nauk. AKAPIT, Kraków 2004.
- [12] Luo J., Wang X., Guo M., Xia J., Precision research in sheet metal flanging and upset extruding, Materials Research Innovations, 15, 2011, 439–442.10.1179/143307511X12858957675552
- [13] Male A.T., Cockroft M.G., A method for the determination of the coefficient of friction of metals under conditions of bulk plastic deformation, Journal of the Institute of Metals, 93, 1964, 38–46.
- [14] Morawiecki M., Sadok L., Wosiek E., Przeróbka plastyczna. Podstawy teoretyczne, Wyd. Śląsk, Katowice 1986.
- [15] Pawelski O., Rasp W., Hoerster C., The ring compression test as simulation test for the investigation of friction in hot metal forming, Steel Research, 60, 1989.10.1002/srin.198901674
- [16] Sofuoglu H., Gedikli H., Determination of friction coefficient encountered in large deformation processes, Tribology International 35, 2002, 27–34; doi:http://dx.doi.org/10.1016/S0301-679X(01)00076-7.10.1016/S0301-679X(01)00076-7
- [17] Tajdari M., Javadi M., A new experimental procedure of evaluating the friction coefficient in elastic and plastic regions, Journal of Materials Processing Technology 177, 2006, 247–250.10.1016/j.jmatprotec.2006.04.033
- [18] Wang F., Lenard J.G., An experimental study of interfacial friction hot ring compression, Journal of Engineering Materials and Technology, 114, 1992, 13–18.10.1115/1.2904133