References
- [1] Biermann D., Kahleyss F., Krebs E., Upmeier T., A Study on Micro-Machining Technology for the Machining of NiTi: Five-Axis Micro-Milling and Micro Deep-Hole Drilling, JMEPEG, vol. 20, 2011, 745–751.10.1007/s11665-010-9796-9
- [2] Elahinia M. H., Hashemi M., Tabesh M., Bhaduri S. B., Manufacturing and processing of NiTi implants: A review, Prog. in Mater. Sci., Vol. 57, 2012, 911–946.10.1016/j.pmatsci.2011.11.001
- [3] Kaczmarek J., Podstawy skrawania metali, PWT., Warszawa 1956.
- [4] Guo Y., Klink A., Fu Ch., Snyder J., Machinability and surface integrity of Nitinol shape memory alloy, CIRP Annals – Manu. Tech., Vol. 62, 2013, 83–86.10.1016/j.cirp.2013.03.004
- [5] Kaynak Y., Robertson S. W., Karacac H.E., Jawahir I.S., Progressive tool-wear in machining of room-temperature austenitic NiTi alloys: The influence of cooling/lubricating, melting, and heat treatment conditions, J. Mater. Process. Tech., Vol. 215, 2015, 95–104.10.1016/j.jmatprotec.2014.07.015
- [6] Kaynak Y., Karaca H.E., Noebe R.D., Jawahir I.S., Tool wear analysis in cryogenic machining of NiTi shape memory alloys: A comparison of tool wear performance with dry and MQL machining, Wear, Vol. 306, 2013, 51–63.10.1016/j.wear.2013.05.011
- [7] Kłaput J., Studies of selected mechanical properties of nitinol – shape memory alloy, Archives of Foundry Engineering, Vol. 10, Issue 3, 2010, 155–158.
- [8] Lin H.C., Lin K.M., Chen Y.C., A study on the machining characteristics of TiNi shape memory alloys, J. Mater. Process. Tech., Vol. 105, 2000, 327-332.10.1016/S0924-0136(00)00656-7
- [9] Piquard R., Acunto A. D, Laheurte P., Dudzinski D., Micro-end milling of NiTi biomedical alloys, burr formation and phase transformation, Prec. Eng., Vol. 38, 2014, 356–364.10.1016/j.precisioneng.2013.11.006
- [10] Weinert K., Petzoldt V., Kotter D., Turning and Drilling of NiTi Shape Memory Alloys, CIRP Annals – Manuf. Technol., Vol. 53, Issue 1, 2004, 65–68.10.1016/S0007-8506(07)60646-5
- [11] Weinert K., Petzoldt V., Machining of NiTi based shape memory alloys, Mater, Sci. and Eng., Vol. 378, 2004, 180–184.10.1016/j.msea.2003.10.344
- [12] Weinert K., Petzoldt V., Machining NiTi micro-parts by micro-milling, Mater, Sci. and Eng., Vol. 481–482, 2008, 672–675.10.1016/j.msea.2006.10.220
- [13] Wu S.K., Lin H.C., Chen C.C., A study on the machinability of a Ti 49,6 Ni 50,4 shape memory alloy, Mater. Letters 40, 1999, 27–3.10.1016/S0167-577X(99)00044-0
- [14] http://iscar.pl (access: 03.10.2016).