References
- [1] Regulation (EU) No. 517/2014 of the European Parliament and of the Council
- [2] Ribatski G., Thome J.R., Nucleate boiling heat transfer of R134a on enhanced tubes, Applied Thermal Engineering, Vol. 26, 2006, 1018–1031.10.1016/j.applthermaleng.2005.09.021
- [3] Ding G., Hu H., Huang X., Deng B., Gao Y., Experimental investigation and correlation oft two-phase frictional pressure drop of R410A-oil mixture flow boiling in a 5mm micro-fin tube, International Journal of Refrigeration, Vol. 32, 2009, 150–161.10.1016/j.ijrefrig.2008.08.009
- [4] Bandarra-Filho E.P., Barbieri P.E.L., Flow boiling performance in horizontal microfinned copper tubes with the same geometric characteristics, Experimental Thermal and Fluid Science, Vol. 35, 2011, 832–840.10.1016/j.expthermflusci.2010.06.012
- [5] Kabelac S., de Buhr H.J., Flow boiling of ammonia in a plain and low finned horizontal tube, International Journal of Refrigeration, Vol. 24, 2001, 41–50.10.1016/S0140-7007(00)00066-9
- [6] Padovan A., Del Col D., Rossetto L., Experimental study on own boiling of R134a and R410A in a horizontal micro n tube at high saturation tubes, Applied Thermal Engineering, Vol.31, 2011, 3814–3826.10.1016/j.applthermaleng.2011.07.026
- [7] Sami S.M., Desjardnis D.E., Prediction of convective boiling characteristics of alternatives to R502 inside air/refrigerant enhanced surface tubing, Applied Thermal Engineering, Vol. 20, 2000, 579–593.10.1016/S1359-4311(99)00044-7
- [8] Targański W., Ciesliński J., Evaporation of 407C/oil mixtures inside corrugated and microfin tubes, Applied Thermal Engineering, Vol. 27, 2007, 2226–2232.10.1016/j.applthermaleng.2005.07.026
- [9] Kim N.H., Lee E.J., Byun H.W., Evaporation heat transfer and pressure drop of R410A in flattened plain tubes having different aspect ratios, International Journal of Refrigeration, Vol. 36, 2013, 363–374.10.1016/j.ijrefrig.2012.10.001
- [10] Akhavan-Behabadi M.A., Kumar R., Mohammadpour A., Jamali-Ashatini M., Effect of twisted tape insert on heat transfer and pressure drop in horizontal evaporators for the flow of R134a, International Journal of Refrigeration, Vol. 32, 2009, 922–930.10.1016/j.ijrefrig.2008.11.004
- [11] Mogaji T.S., Kanizawa F.T., Filho E.P.B., Ribatski G., Experimental study of the effect of twisted-tape inserts on flow boiling heat transfer enhancement and pressure drop penalty, International Journal of Refrigeration, Vol. 36, 2013, 504–515.10.1016/j.ijrefrig.2012.10.008
- [12] Yun R., Hwang J-S., Chung J.T., Kim Y., Flow boiling heat transfer characteristics of nitrogen in plain and wire coil inserted tubes, International Journal of Heat and Mass Transfer, Vol. 50, 2007, 2339–2345.10.1016/j.ijheatmasstransfer.2006.10.038
- [13] Niezgoda-Żelasko B, Żelasko J., Free and forced convection on the outer surface of vertical longitudinally finned tubes, Experimental Thermal And Fluid Science, Vol. 57, 2014, 145–156.10.1016/j.expthermflusci.2014.04.014
- [14] Lemmon E.W., Huber M.L., McLinden M.O., NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties Database REFPROP, Gaithersburg 2010.
- [15] Thome J.R., Engineering data book III, Wolverine Tube, Inc. 2004–2010.