References
- [1] Czop P., Sawik D., A high-frequency first-principle model of a shock absorber and servo-hydraulic tester, Mechanical Systems and Signal Processing 25(6), August 2011, 1937–1955.10.1016/j.ymssp.2011.01.011
- [2] Dixon J.C., The shock absorber handbook, Professional Engineering Publishing Ltd and John Wiley and Sons, 2007.10.1002/9780470516430
- [3] Duym S., Steins R., Reybrouck K., Evaluation of shock absorber models, Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility 27(2), 1997, 109–127.10.1080/00423119708969325
- [4] Dzierżek S., Knapczyk M., Malinowski M., Extending passive dampers functionality for specific ride and handling requirements, Czasopismo Techniczne, 6-M/2008, 39–47.
- [5] Eickhoff M., Sonnenburg R., Stretz A., Piston rod vibrations in damper modules – causes and remedies, ATZ, Vol. 112, 2010, 24–29.10.1007/BF03225225
- [6] Farjoud A., Ahmadian M., Craft M., Burke W., Nonlinear modeling and experimental characterization of hydraulic dampers: effects of shim stack and orifice parameters on damper performance, Nonlinear Dynamics, Vol. 67, Issue 2, January 2012, 1437–1456.10.1007/s11071-011-0079-2
- [7] Ferdek U., Łuczko J., Modeling and analysis of a twin-tube hydraulic shock absorber, Czasopismo Techniczne, 2-M/2012, 627–638.
- [8] Kruse A., Analysis of dynamic pressure build-up in twin-tube vehicle shock absorbers with respect to vehicle acoustics, SAE International, Vehicle Dynamics Expo 2008, Stuttgart 2008.
- [9] Kruse A., Characterizing and reducing structural noises of vehicle shock absorber system, SAE Technical Report 2002-01-1234, 2002.10.4271/2002-01-1234
- [10] Lang H.H., A study of the characteristics of automotive hydraulic dampers at high stroking frequencies, The University of Michigan, 1977.
- [11] Pressure sensor data sheet: http://www.keller-druck.com/picts/pdf/engl/4lc_9lc_e.pdf (access: 14.04.2015).