References
- Khairina N, Puspitasari D, Diana S. The comparison of the storage temperature on diametral tensile strenght value of bulk-fill resin composite. Dent J Kedok Gigi. 2018;3(1):76-80. https://doi.org/10.20527/dentino.v3i1.4606
- Li Q, Jepsen S, Albers HK, Eberhard J. Flowable materials as an intermediate layer could improve the marginal and internal adaptation of composite restorations in Class-V-cavities. Dent Mater. 2006;22(3):250-7. https://doi.org/10.1016/j.dental.2005.04.011 PMid:160845847
- Korkmaz Y, Ozel E, Attar N. Effect of flowable composite lining on microleakage and internal voids in Class II composite restorations. J Adhes Dent. 2007;9(2):189-94.
- Blumer L, Schmidli F, Weiger R, Fischer J. A systematic approach to standardize artificial aging of resin composite cements. Dent Mater. 2015;31(7):855-63. https://doi.org/10.1016/j.dental.2015.04.015 PMid:25998485
- Dionysopoulos D, Tolidis K, Gerasimou P, Koliniotou-Koumpia E. Effect of preheating on the film thickness of contemporary composite restorative materials J. Dent Sci. 2014;9(4):313-9. https://doi.org/10.1016/j.jds.2014.03.006
- Jin MU. Prepare the pre-heated composite resin. Restor Dent Endod. 2013;38(2):103-4. https://doi.org/10.5395/rde.2013.38.2.103 PMid:23741715
- Didron PP, Ellakwa A, Swain MV. Effect of preheat temperatures on mechanical properties and polymerization contraction stress of dental composites. J MASA. 2013;4(6):374-85. https://doi.org/10.4236/msa.2013.46048
- Davari A. Effect of pre-heating on microtensile bond strength of resin to of composite dentin. J Dent Sci (Tehran). 2014;11(5):569-75. PMid:25628684
- Morais A, Santos AR, Giannini M, Reis AF, Rodrigues JA, Arrais CA. Effect of pre-heated dual-cured resin cements on the bond strength of indirect restorations to dentin. Braz Oral Res. 2012;26(2):170-6. https://doi.org/10.1590/s1806-83242012000200014 PMid:22473354
- Alvarado MS, García DM, Guillén AJ, Arriaga JC, Ramírez GF, Magdaleno MO, et al. Evaluation of the bond strength and marginal seal of indirect restorations of composites bonded with preheating resin. Dent Investig Soc. 2020;14(4):644-50. https://doi.org/10.1055/s-0040-1716630
- Winarta E, Suwartini T, Prahasti E, Tjandrawinata R. The effect of repeated preheating on diametral tensile strength of composite resin with different fillers. Sci Dent J. 2020;4(2):44-8. https://doi.org/10.4103/SDJ.SDJ_35_19
- Ahn KH, Lim S, Kum KY, Chang SW. Effect of preheating on the viscoelastic properties of dental composite under different deformation conditions. Dent Mater J. 2015;34(5):702-6. https://doi.org/10.4012/dmj.2015-042 PMid:26438995
- Tomaselli LO, Oliveira DC, Favarão J, Silva AF, Pires-de-Souza FC, Geraldeli S, et al. Influence of pre-heating regular resin composites and flowable composites on luting ceramic veneers with different thicknesses. Braz Dent J. 2019;30(5):459-66. https://doi.org/10.1590/0103-6440201902513 PMid:31596330
- Van Meerbeek B, Peumans M, Poitevin A, Mine A, Van Ende A, Neves A, et al. Relationship between bond-strength tests and clinical outcomes. Dent Mater. 2010;26(2):e100-21. https://doi.org/10.1016/j.dental.2009.11.148 PMid:20006379
- Daronch M, Rueggeberg FA, Moss L, De Goes MF. Clinically relevant issues related to preheating composites. J Esthet Restor Dent. 2006;18(6):340-50. https://doi.org/10.1111/j.1708-8240.2006.00046.x PMid:170834391.
- Mandava J, Vegesna DP, Ravi R, Boddeda MR, Uppalapati LV, Ghazanfaruddin MD. Microtensile bond strength of bulk-fill restorative composites to dentin. J Clin Exp Dent. 2017;9(8):e1023-8. https://doi.org/10.4317/jced.53965 PMid:28936294
- Theobaldo JD, Aguiar FH, Pini NIP, Lima DA, Liporoni PC, Catelan A. Effect of preheating and light-curing unit on physicochemical properties of a bulk fill composite. Clin Cosmet Investig Dent. 2017;9:39-43. https://doi.org/10.2147/CCIDE.S130803 PMid:28652817
- Elolimy GA. Effect of pre-heating on hardness, flexural properties and depth of cure of dental two resin composites. Egypt Dent J. 2020;66(3):1731-9. https://doi.org/10.21608/EDJ.2020.24610.1043
- Fróes-Salgado NR, Silva LM, Kawano Y, Francci C, Reis A, Loguercio AD. Composite pre-heating: Effects on marginal adaptation, degree of conversion and mechanical properties. Dent Mater. 2010;26(9):908-14. https://doi.org/10.1016/j.dental.2010.03.023 PMid:20557926
- Lee JH, Um CM, Lee IB. Rheological properties of resin composites according to variations in monomer and filler composition. Dent Mater. 2006;22(6):515-26. https://doi.org/10.1016/j.dental.2005.05.008 PMid:16171856
- Nada K, El-Mowafy O. Effect of precuring warming on mechanical properties of restorative composites. Int J Dent. 2011;2011:536212. https://doi.org/10.1155/2011/536212 PMid:221145965.
- Moosavi H, Maleknejad F, Forghani M, Afshari E. Evaluating resin-dentin bond by microtensile bond strength test: Effects of various resin composites and placement techniques. Open Dent J. 2015;9:409-13. https://doi.org/10.2174/1874210601509010409 PMid:26966466
- Choudhary N, Kamat S, Mangala T, Thomas M. Effect of pre-heating composite resin on gap formation at three different temperatures. J Conserv Dent. 2011;14(2):191-5. https://doi.org/10.4103/0972-0707.82618 PMid:21814365
- Deb S, Di Silvio L, Mackler HE, Millar BJ. Pre-warming of dental composites. Dent Mater. 2011;27(4):e51-9. https://doi.org/10.1016/j.dental.2010.11.009 PMid:21145580
- Karacan AO, Ozyurt P. Effect of preheated bulk-fill composite temperature on intrapulpal temperature increase in vitro. J Esthet Restor Dent. 2019;31(6):583-8. https://doi.org/10.1111/jerd.12503 PMid:311942886.
- Karatas K, Sağsöz O, Ozakar N, Bayindir YZ. Thermal conductivity of different composite resin materials in different polymerization times and modes. J Dent Fac 2019;29(1):20-5. https://doi.org/10.17567/ataunidfd.522584
- Ferracane JL. Buonocore Lecture. Placing dental composites--a stressful experience. Oper Dent. 2008;33(3):247-57. https://doi.org/10.2341/07-BL2 PMid:18505214
- Demirbuga S, Ucar FI, Cayabatmaz M, Zorba YO, Cantekin K, Topçuoğlu HS, et al. Microshear bond strength of preheated silorane-and methacrylate-based composite resins to dentin. Scanning. 2016;38(1):63-9. https://doi.org/10.1002/sca.21242 PMid:26381904