Analysis of the possibility of employing 3D printing technology in crisis situations
References
- 3D Printing Market Size, Share & Trends Analysis Report (2020). Grand View Research.
- Akcja Drukarze Dla Szpitali (online). https://www.drukarzedlaszpitali.pl/ (online: 24.04.2020).
- ARME (online). https://armeevent.com/ (online: 24.04.2020).
- Bogdanowicz, K.A., Pirone, D., Prats-Reig, J., Ambrogi, V., Reina, J.A., Giamberini, M. (2018). In Situ Raman Spectroscopy as a Tool for Structural Insight into Cation Non-Ionomeric Polymer Interactions during Ion Transport. Polymers, 10, 416.10.3390/polym10040416641522130966451
- Bogdanowicz, K.A., Maleczek, S., Drabczyk, K., Iwan, A. (2020). Engineering Concept of Energy Storage Systems Based on New Type of Silicon Photovoltaic Module and Lithium Ion Batteries. Energies, 13, 3701.
- Budd, L., Griggs, S., Howarth, D., & Ison, S., (2011). A Fiasco of Volcanic Proportions Eyjafjallajökull and the Closure of European Airspace. Mobilities, 6, 31–40.10.1080/17450101.2011.532650
- Cloudhury, K.D., Saha, S., Das, M. (2011). An inventory model with Lot Size Dependent carrying/holding cost. Assam Univ. J. Sci. Technol. Phys. Sci. Technol., 7, 133–136.
- Dz. U. 2007 nr 89 poz. 590, Ustawa z dnia 26 kwietnia 2007 r. o zarządzaniu kryzysowym.
- Erbeyoglu, G., Bilge, Ü. (2020). A robust disaster preparedness model for effective and fair disaster response. Eur. J. Oper. Res., 280, 479-494.10.1016/j.ejor.2019.07.029
- Farahani, R., Lotfi, M.M., Atefeh, Baghaian, R. Ruiz, Rezapour S. (2020). Mass casualty management in disaster scene: A systematic review of OR & MS research in humanitarian operations. Eur. J. Oper. Res., 287, 787–819.10.1016/j.ejor.2020.03.005
- Fernandez-Vicente, M., Escario Chust, A., Conejero, A. (2017). Low cost digital fabrication approach for thumb orthoses. Rapid Prototyping Journal, 23, 1020–1031.10.1108/RPJ-12-2015-0187
- Interview with Ford Motor Company CEO for Reuters (online). http://www.reuters.com/article/us-health-coronavirus-usa-fo.rd-motor/ford-geto-produce-50000-ventilators-in-100-days-idUSKBN21H39F (online: 24.04.2020).
- Kashte, S., Maras, J.S., Kadam, S. (2018). Bioinspired Engineering for Liver Tissue Regeneration and Development of Bioartificial Liver: A Review. Crit Rev Biomed Eng, 46(5), 413–427. doi:10.1615/CritRevBiomedEng.2018028276.10.1615/CritRevBiomedEng.201802827630806261
- Kim, E., Shin, Y.-J., Ahn, S.-H. (2016), The effects of moisture and temperature on the mechanical properties of additive manufacturing components: fused deposition modelling. Rapid Prototyping Journal, 22(6), 887–894. https://doi.org/10.1108/RPJ-08-2015-009510.1108/RPJ-08-2015-0095
- Krishnaswamy, J.A., Buroni, F.C., Melnik, R., Rodriguez-Tembleque, L., Saez, A. (2020). Design of polymeric auxetic matrices for improved mechanical coupling in lead-free piezocomposites, Smart Materials and Structures, 29(5), art. no. 054002.
- LEITIAT (online). https://covid-leitat.org/en/ventilator/ (online: 24.04.2020).
- Levin, D., Mackensen, G.B., Reisman, M., McCabe, J.M., Dvir, D., Ripley, B. (2020). 3D Printing Applications for Transcatheter Aortic Valve Replacement. Curr Cardiol Rep., 22(4), 23.. doi:10.1007/s11886-020-1276-8.10.1007/s11886-020-1276-832067112
- Made in Space (online) https://madeinspace.us/about/spaceflight-missions/ (online: 27.08.2020).
- Mendis, D., Nordemann, J.B., Ballardini, R.M., Brorsen, H., Moreno, M., Robson, J., Dickens, P., (2020). The Intellectual Property Implications of the Development of Industrial 3D Printing, Study commissioned to Bournemouth University carried out for the European Commission, Final Report, 12 February 2020.
- Minguella-Canela, J., Morales Planas, S., Gomà Ayats, J.R., De los Santos López, M.A., (2018). Assessment of the Potential Economic Impact of the Use of AM Technologies in the Cost Levels of Manufacturing and Stocking of Spare Part Products. Materials, 11, 1429.10.3390/ma11081429612000230110904
- Prusa Research (online). https://blog.prusaprinters.org/from-design-to-mass-3d-printing-of-medical-shields-in-three-days/ (online: 24.04.2020).
- Raport dotyczący rozwoju rynku drukarek 3D (online). https://www2.deloitte.com/content/dam/Deloitte/pl/Images/Infografiki/infografika_zortrax_3d_printing_market_outlook_pl.pdf (online: 24.04.2020).
- Salmi, M., Akmal, J.S., Pei, E., Wolff, J., Jaribion, A., Khajavi, S.H. (2020). 3D Printing in COVID-19: Productivity Estimation of the Most Promising Open Source Solutions in Emergency Situations. Appl. Sci., 10, 4004.10.3390/app10114004
- Snopczyński, M., Kotliński, J., Musiałek, I. (2019). Badanie właściwości mechanicznych materiałów stosowanych w technologii FDM. Mechanik, 4, https://doi.org/10.17814/mechanik.2019.4.3710.17814/mechanik.2019.4.37
- Sun, J., Zhou, W., Huang, D., Yan, L. (2018). 3D Food Printing: Perspectives. In: T. Gutiérrez (ed.) Polymers for Food Applications. Springer, Cham. https://doi.org/10.1007/978-3-319-94625-2_26.10.1007/978-3-319-94625-2_26
- Tian, X., Liu, T., Wang, Q., Dilmurat, A., Li, D., Ziegmann, G. (2017). Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites. Journal of Cleaner Production, 142, 1609–1618.10.1016/j.jclepro.2016.11.139
- VentilAid (online). https://www.ventilai.org/pl/ (online: 24.04.2020).
- Wimpenny, D.I., Pandey, P.M, Kumar L.J. (2017). Advances in 3D Printing & Additive Manufacturing Technologies, Singapore: Springer Science+Business Media.10.1007/978-981-10-0812-2
DOI: https://doi.org/10.37705/TechTrans/e2021008 | Journal eISSN: 2353-737X | Journal ISSN: 0011-4561
Language: English
Submitted on: Apr 7, 2021
Accepted on: Jun 17, 2021
Published on: Jun 20, 2021
Published by: Cracow University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Related subjects:
© 2021 Andrzej Wysoczański, Zbigniew Kamyk, Yann Yvinec, published by Cracow University of Technology
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 License.