Mechanical Strength Indicators of Polyurethane Adhesive in Lightweight Floor Systems
References
- ASTM E132 – 17. Standard Test Method for Poisson’s Ratio at Room Temperature.
- ASTM E111 – 17. Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus.
- Ashikuzzaman, Md., Tarif Uddin, A., Zahidul, A., Altaf Hossain, Md. (2018). Effect of Brick Forming Load on Mechanical Properties of FlyAsh Bricks. Tr Civil Eng & Arch, 3(2), 1–6. TCEIA.MS.ID.000157. DOI: 10.32474/TCEIA.2018.03.00015710.32474/TCEIA.2018.03.000157
- Bednarski, L., Sienko, R., Howiacki, T. (2014). Oszacowanie wartosci i zmiennosci modulu sprezystosci betonu w istniejacej konstrukcji na podstawie ciaglych pomiarow in situ. CWB, 6, 396–404.
- Boronski, D. (2004). The effect of the method of determination of Young’s modulus on the estimation of fatigue life of structural elements. Journal of theoretical and applied mechanics, 42(2), 269–83.
- BS EN 1015-11:2019. Methods of test for mortar for masonry. Determination of flexural and compressive strength of hardened mortar.
- EN 1991-1-1:2004. Eurocode 1: Actions on structures – Part 1-1: General actions - Densities, self-weight, imposed loads for buildings.
- EN 485-2:2016+A1:2018. Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties.
- EN ISO 10545-8:2014. Ceramic tiles. Determination of linear thermal expansion.
- Ferretti, F., Incerti, A., Ferracuti, B., Mazzotti, C. (2016). Diagonal compression tests on masonry panels strengthened by FRP and FRCM. In Proc. of SAHC 2016, 13-15. Leuven, Belgium.
- Galman, I. (2012). PhD Thesis: Sciany z ceramicznej cegly pelnej cyklicznie sciskanej w swej płaszczyznie lub zginane prostopadle do plaszczyzny. Gliwice: Katedra Konstrukcji Budowlanych. Wydzial Budownictwa, Politechnika Sląska.
- Karpiesiuk, J., Chyzy, T. (2017). Wyniki eksperymentalnych badan rozkladu temperatury grzejnikow plaszczyznowych o lekkiej konstrukcji bez jastrychow. Rynek Instalacyjny, 11(XXV), 45–50.
- Karpiesiuk, J., Chyzy, T. (2017). Wyniki wybranych badań wytrzymałości międzyfazowej lekkiego grzejnika płaszczyznowego z rozpraszaczami ciepła. Civil and Environmental Engineering/Budownictwo i Inżynieria Środowiska, 8(3), 123–132.
- Kwiecien, A., Hojdys, L., Krajewski, P., Tekieli, M. (2017). Differences in strain distribution of stiff mineral and flexible polyurethane adhesives in DIC observation. COST Action TU1207, Next Generation Design Guidelines for Composites in Construction. Retrieved from https://sites.google.com/a/sheffield.ac.uk/tu1207/dissemination/state-of-the-art. (date of access: 2020/02/15).
- Nejati, M., Dambly, M.L.T., Saar, M.O. (2019). A methodology to determine the elastic properties of anisotropic rocks from a single uniaxial compression test. Journal of Rock Mechanics and Geotechnical Engineering, 11, 1166–1183.10.1016/j.jrmge.2019.04.004
- NORDTEST Method NT VVS127: UDC 697.1: Approved 2001-11. Floor heating systems. Design and type testing of waterborne heat systems for lightweight structures.
- PN-B-04500:1971. Zaprawy budowlane – Badania cech fizycznych i wytrzymalosciowych.
- Product catalogue Fibran S.A. (September 2011). Extruded polystyrene thermal insulation FIBRANxps.
- Werner-Juszczuk, A.J. (2018). Experimental and numerical investigation of lightweight floor heating with metallised polyethylene radiant sheet. Energy & Buildings, 177, 23–32.10.1016/j.enbuild.2018.08.011
- Zając, B. (2018). Scinane polaczenia klejone sztywne i podatne pracujące w podwyższonej temperaturze. Kraków: Politechnika Krakowska.
DOI: https://doi.org/10.37705/TechTrans/e2020024 | Journal eISSN: 2353-737X | Journal ISSN: 0011-4561
Language: English
Submitted on: Apr 14, 2020
Accepted on: Jul 16, 2020
Published on: Jul 22, 2020
Published by: Cracow University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Related subjects:
© 2020 Jacek Karpiesiuk, published by Cracow University of Technology
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 License.