References
- Aravindan V., Jinesh K.B., Prabhakar R.R., Kale V.S., Madhavi S., Atomic layer deposited (ALD) SnO2 anodes with exceptional cycleability for Li-ion batteries, Nano Energy, 2013, 2, 720–725, DOI: 10.1016/j.nanoen.2012.12.007.
- Bansal P., Singh G., Sidhu H.S., Improvement of surface properties and corrosion resistance of Ti13Nb13Zr titanium alloy by plasma-sprayed HA/ZnO coatings for biomedical applications, Mater. Chem. Phys., 2021, 30 (3), 257, DOI: 10.1016/j.matchemphys.2020.123738.
- Bansal P., Singh G., Sidhu H.S., Plasma-Sprayed Hydroxyapatite- Strontium Coating for Improved Corrosion Resistance and Surface Properties of Biodegradable AZ31 Mg Alloy for Biomedical Applications, J. Mater. Eng. Perform., 2021, 30, 1768–1779, DOI: 10.1007/s11665-021-05490-0.
- Bhalshankar S., Application of Nano Technology, [in:] Biomedical Engineering EasyChair, 2021.
- Hacking S.A., Zuraw M., Harvey E.J., Tanzer M., Krygier J.J., Bobyn J.D., A physical vapor deposition method for controlled evaluation of biological response to biomaterial chemistry and topography, J. Biomed. Mater. Res., Part A, 2007, 82 (1), 179–187, https://doi.org/10.1002/jbm.a.31131
- Hussein M.A., Yilbas B., Kumar A.M., Drew R., Al-Aqeeli N., Influence of Laser Nitriding on the Surface and Corrosion Properties of Ti-20Nb-13Zr Alloy in Artificial Saliva for Dental Applications, J. Mater. Eng. Perform., 2018, 27 (9), 4655–4664, https://doi.org/10.1007/s11665-018-3569-2
- Kierat O., Dudek A., Adamczyk L., The effect of the corrosion medium on silane coatings deposited on titanium grade 2 and titanium alloy Ti13Nb13Zr, Mater., 2022, 14 (21), https://doi.org/10.3390/ma14216350
- Kopova I., Stráský J., Harcuba P., Landa M., Janeček M., Bačákova L., Newly developed Ti–Nb–Zr–Ta–Si–Fe biomedical beta titanium alloys with increased strength and enhanced biocompatibility, Mater. Sci. Eng. C, 2016, 60, 230–238, https://doi.org/10.1016/J.MSEC.2015.11.043
- Kuroda D., Niinomi M., Morinaga M., Kato Y., Yashiro T., Design and mechanical properties of new β type titanium alloys for implant materials, Mater. Sci. Eng. A, 1998, 243 (1–2), 244–249, https://doi.org/10.1016/S0921-5093(97)00808-3.
- Lisoń J., Taratuta A., Paszenda Z., Dyner M., Basiaga M., A study on the physicochemical properties of surface modified Ti13Nb13Zr alloy for skeletal implants, Acta Bioeng. Biomech., 2022, 24 (1), 39–47, DOI: 10.37190/ABB-01919-2021-04.
- Liu X., Chu P.K., Ding C., Surface modification of titanium, titanium alloys, and related materials for biomedical applications, Mater. Sci. Eng. R Rep., 2004, 47 (3–4), 49–121, https://doi.org/10.1016/J.MSER.2004.11.001
- Morinaga M., Kato M., Kamimura T., Fukumotom M., Harada I., Kubo K., Theoretical design of β-type titanium alloys, Titanium 1992, Science and Technology, Proc. 7th Int. Conf. on Titanium, San Diego, CA, USA, June 29–July 2, 1992, 276–283.
- Niinomi M., Liu Y., Nakai M., Liu H., Li H., Biomedical titanium alloys with Young’s moduli close to that of cortical bone, Regen. Biomater., 2016, 3 (3), 173–185, https://doi.org/10.1093/rb/rbw016
- Pawłowski Ł., Rościszewska M., Majkowska-Marzec B., Jażdżewska M., Bartmański M., Zieliński A., Tybuszewska N., Samsel P., Influence of Surface Modification of Titanium and Its Alloys for Medical Implants on Their Corrosion Behavior, Mater., 2022, 15 (21), 7556, https://doi.org/10.3390/ma15217556
- Piotrowska K., Granek A., Madej M., Assessment of Mechanical and Tribological Properties of Diamond-Like Carbon Coatings on the Ti13Nb13Zr Alloy, Open Eng., 2020, 10 (1), 536–545, https://doi.org/10.1515/eng-2020-0043.
- Quinn J., McFadden R., Chan C.W., Carson L., Titanium for Orthopedic Applications: An Overview of Surface Modification to Improve Biocompatibility and Prevent Bacterial Biofilm Formation, iScience, 2020, 23 (11), 101745, DOI: 10.1016/j.isci.2020.101745.
- Semlitsch M., Staub F., Weber H., Titanium-Aluminium-Niobium Alloy, Development for Biocompatible, High Strength Surgical Implants – Titan-Aluminium-Niob-Legierung, entwickelt für körperverträgliche, hochfeste Implantate in der Chirurgie”, BMT, 2009, 30 (12), 334–339, https://doi.org/10.1515/bmte.1985.30.12.334