References
- Barbir, F. (2005). PEM Fuel Cell Theory and Practice, Elsevier/Academic Press, Burlington.
- Benmouna, A., Becherif, M., Depernet, D., Gustin, F., Ramadan, H. and Fukuhara, S. (2017). Fault diagnosis methods for proton exchange membrane fuel cell system, International Journal of Hydrogen Energy 42(2): 1534–1543.
- Bethapudi, V., Maier, M., Hinds, G., Shearing, P., Brett, D. and Coppens, M.-O. (2019). Acoustic emission as a function of polarisation: Diagnosis of polymer electrolyte fuel cell hydration state, Electrochemistry Communications 109: 106582.
- Bohse, J. (2004). Acoustic emission examination of polymer-matrix composites, Journal of Acoustic Emission 22: 208–223.
- Fox, E.B. and Colon-Mercado, H.R. (2011). Mass transport limitations in proton exchange membrane fuel cells and electrolyzers, in H. Nakajima (Ed.), Mass Transfer, IntechOpen, Rijeka, Chapter 13, pp. 305–318, DOI: 10.5772/20349.
- He, Y., Li, M., Meng, Z., Chen, S., Huang, S., Hu, Y. and Zou, X. (2021). An overview of acoustic emission inspection and monitoring technology in the key components of renewable energy systems, Mechanical Systems and Signal Processing 148: 107146.
- Hissel, D. and Péra, M.-C. (2016). Diagnostic & health management of fuel cell systems: Issues and solutions, Annual Reviews in Control 42: 201–211.
- Legros, B., Thivel, P.-X., Bultel, Y., Boinet, M. and Nogueira, R. (2010). Acoustic emission: Towards a real-time diagnosis technique for proton exchange membrane fuel cell operation, Journal of Power Sources 195(24): 8124–8133.
- Legros, B.and Thivel, P.-X., Bultel, Y. and Nogueira, R. (2023). PEMFC on line diagnosis via acoustic emission measurements, https://www.sintef.no/globalassets/project/fc-tools/dokumenter/presentation/4a/thivel.pdf.
- Lipiec, B., Mrugalski, M., Witczak, M. and Stetter, R. (2022). Towards a health-aware fault tolerant control of complex systems: A vehicle fleet case, International Journal of Applied Mathematics and Computer Science 32(4): 619–634, DOI: 10.34768/amcs-2022-0043.
- Matsuura, T., Chen, J., Siegel, J.B. and Stefanopoulou, A.G. (2013). Degradation phenomena in PEM fuel cell with dead-ended anode, International Journal of Hydrogen Energy 38(26): 11346–11356.
- Najafi, B., Bonomi, P., Casalegno, A., Rinaldi, F. and Baricci, A. (2020). Rapid fault diagnosis of PEM fuel cells through optimal electrochemical impedance spectroscopy tests, Energies 13(14), Paper ID: 3643.
- Niroumand, A.M., Mérida, W. and Saif, M. (2011). PEM fuel cell low flow FDI, Journal of Process Control 21(4): 602–612.
- Ogawa, M. (2020). Toshiba hydrogen business and fuel cells, h ttps://www.bdi.fr/wp-content/uploads/2020/12/Toshiba-H2-biz-and-FC-Rev0-16dec2020.pdf.
- Pivac, I., Radica, G., Barbir, F., Benouioua, D., Harel, F. and Candusso, D. (2017). Diagnostic methods for automotive fuel cell systems, Technical Report D-1.4, European Commission, Brussels, https://ec.europa.eu/research/participants/documents/downloadPublic?documentIds=080166e5b77c06fa&appId=PPGMS.
- Polak, A. (2017). PEM hydrogen fuel cells—Experimental studies on the effect of oxygen flow rate on the polymer membrane, Polymer Processing 176(2): 123–133, (in Polish).
- Taniguchi, A., Akita, T., Yasuda, K. and Miyazaki, Y. (2008). Analysis of degradation in PEMFC caused by cell reversal during air starvation, International Journal of Hydrogen Energy 33(9): 2323–2329.
- van Biert, L., Godjevac, M., Visser, K. and Aravind, P. (2016). A review of fuel cell systems for maritime applications, Journal of Power Sources 327: 345–364.
- Wang, H., Yuan, X.-Z. and Li, H. (Eds) (2011). PEM Fuel Cell Diagnostic Tools, CRC Press, Boca Raton, DOI: 10.1201/b11100.
- Wu, J., Zi Yuan, X., Wang, H., Blanco, M., Martin, J.J. and Zhang, J. (2008). Diagnostic tools in PEM fuel cell research. Part II: Physical/chemical methods, International Journal of Hydrogen Energy 33(6): 1747–1757.