References
- Abdel-Gawwad, H.A., Heikal, M., 2019. Mohammed, M.S., El-Aleem, S. A., Hassan, H.S., García, R. S.V., Alomayri, T. Sustainable disposal of cement kiln dust in the production of cementitious materials. Journal of Cleaner Production, 232, 1218–1229. DOI: 10.1016/j.jclepro. 2019.06.016
- Adhikary, S.K., Ashish, D. K., Rudžionis. Z., 2021. Expanded glass as lightweight aggregate in concrete – A review, Journal of Cleaner Production, 313, 127848, DOI: 10.1016/j.jclepro.2021.127848
- Ahmed, H.M., Hefni, M.A., Ahmed, H.A.M., Saleem, H.A., 2023. Cement Kiln Dust (CKD) as a Partial Substitute for Cement in Pozzolanic Concrete Blocks. Buildings, 13, 568. DOI: 10.3390/buildings13020568
- Al-Aghbari, M.Y., Mohamedzein, Y.E.-A., Taha, R., 2009. Stabilisation of desert sands using cement and cement dust, Proc. Inst. Civ. Eng. - Ground Improv., 162, 145–151. DOI: 10.1680/grim.2009.162.3.145
- Al-Harthy, A.S., Taha, R., Al-Maamary, F., 2003. Effect of cement kiln dust (CKD) on mortar and concrete mixtures, Construction and Building Materials. 17, 353–360. DOI: 10.1016/S0950-0618(02)00120-4
- Al-Jabri, K.S., Taha, R.A., Al-Hashmi, A., Al-Harthy, A.S. 2006. Effect of copper slag and cement by-pass dust addition on mechanical properties of concrete. Construction and Building Materials, 20, 322–331. DOI: 10.1016/j.conbuildmat.2005.01.020
- Al-Jabri, K.S., Taha, R.A., Al-Ghassani, M., 2002. Use of copper slag and cement by-pass dust as cementitious materials. Cem. Concr. Aggreg., 24, 7–12. DOI: 10.1520/CCA10485J
- Aydin, T., Tarhan, M., Tarhan, B., 2019. Addition of cement kiln dust in ceramic wall tile bodies. J. Therm. Anal. Calorim., 136, 527–533. DOI: 10.1007/s10973-018-7615-y
- Bassam, I. A., Tayeh, A., Alyousef, R., Alabduljabbar, H., Mohamed, A.M., Alaskar, A., 2020. Use of recycled plastic as fine aggregate in cementitious composites: A review, Construction and Building Materials, 253, 119146. https://doi.org/10.1016/j.conbuildmat.2020.119146
- Bawab, J.; Khatib, J.; Kenai, S.; Sonebi, M. A Review on Cementitious Materials Including Municipal Solid Waste Incineration Bottom Ash (MSWI-BA) as Aggregates. Buildings 2021, 11, 179. https://doi.org/10.3390/buildings11050179
- Borek, K., Czapik, P., Dachowski, R., 2023. Cement Bypass Dust as an Ecological Binder Substitute in Autoclaved Silica-Lime Products, Materials, 16, 316. DOI: 10.3390/ma16010316
- Buczynski, P., Iwanski, M., 2017 The influence of hydrated lime, portland cement and cement dust on rheological properties of recycled cold mixes with foamed bitumen, [in] Proceedings of the “Environmental Engineering” 10th International Conference, Vilnius, Lithuania, 27–28.
- Collivignarelli, M.C., Cillari, G., Ricciardi, P., Miino, M. C., Torretta, V., Rada, E. C., Abbà, A., 2020. The production of sustainable concrete with the use of alternative aggregates: a review, Sustainability, 12(19), 7903, DOI: 10.3390/su12197903
- Czajkowska, A., Raczkiewicz, W., Ingaldi, M., 2023. Determination of the linear correlation coefficient between Young’s modulus and the compressive strength in fibre-reinforced concrete based on experimental studies, Production Engineering Archives, 29(3), 288-297. DOI: 10.30657/pea.2023.29.33
- DIRECTIVE (EU) 2018/851 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 30 May 2018 amending Directive 2008/98/EC on waste
- Ebubekir, M., Hakan G., Süleyman. K., 2020. The effect of gradation and grain-size properties of fine aggregate on the building mortars. Production Engineering Archives, 26(3), 3920, 121-126. DOI: 10.30657/pea.2020.26.23
- Didamony H. El,. Helmy I.M., Amer A.A, 1992. Utilization of cement dust in blended cement, Pakistan Journal of Scientific and Industrial Research, 35(7-8), 304-308.
- Eurostat on https://ec.europa.eu/eurostat/statistics-explained/index.php?title=Municipal_waste_statistics (access 05.11.2025)
- Hanein, T., Hayashi, Y., Utton, C., Nyberg, M., Martinez, J.C., Quintero-Mora, N.I., Kinoshita, H., Pyro processing cement kiln bypass dust: Enhancing clinker phase formation, Construction and Building Materials, 259, 2020, 120420, https://doi.org/10.1016/j.conbuildmat.2020.120420
- Helbrych, P., 2019. Recycling of sulfur polymers derived from the purification process of copper and other non-ferrous metals in concrete composites, Construction of Optimized Energy Potential, 8(1), 131-136. DOI: 10.17512/bozpe.2019.1.14
- Jura, J., Ulewicz, M., 2021. Assessment of the possibility of using fly ash from biomass combustion for concrete, Materials, 14(21), 6708, DOI: 10.3390/ma14216708
- Kalak, T., Szypura, P., Cierpiszewski. R., Ulewicz, M., 2023. Modification of concrete composition doped by sewage sludge fly ash and its effect on compressive strength, Materials, 16(11), 4043. DOI: 10.3390/ma16114043
- Kalinowska-Wichrowska, K., Pawluczuk, E., Bołtryk, M., Jimenez, J.R., Fernandez-Rodriguez, J.M., Suescum Morales, D., 2022. The performance of concrete made with secondary products -recycled coarse aggregates, recycled cement mortar, and fly ash–slag mix, Materials, 15, 1438, DOI: 10.3390/ma15041438
- Keerthi, Y., Divya Kanthi, P., Tejaswi, N., Shyam Chamberlin, K., Satyanarayana, B., 2013. Stabilization of clayey soil using cement kiln waste, International Journal of Advanced Structures and Geotechnical Engineering, 2, 2319–5347
- Lis, T., Nowacki, K., 2022. Pro-ecological possibilities of using metallurgical waste in the production of aggregates, Production Engineering Archives, 28(3), 3922, 252-256, DOI: 10.30657/pea.2022.28.31
- Malaiškienė, J.; Spudulis, E.; Stonys, R. The Effect of Milled Municipal Solid Waste Incineration Bottom Ash on Cement Hydration and Mortar Properties. Materials 2023, 16, 2528. https://doi.org/10.3390/ma16062528
- Nocuń-Wczelik, W., Stolarska, K., 2019. Calorimetry in the studies of bypass cement kiln dust as an additive to the calcium aluminate cement, J. Therm. Anal. Calorim., 138, 4561–4569. DOI: 10.1007/s10973-019-08913-2
- Owsiak Z., Czapik P., Zapała-Sławeta J., 2020. Testing the cement, hydrated lime and cement by-pass dust mixtures hydration, Roads and Bridges, 19, 135-147. DOI: 10.7409/rabdim.020.009
- Peethamparan, S., Olek, J., 2008. Lovell, J. Influence of chemical and physical characteristics of cement kiln dusts (CKDs) on their hydration behavior and potential suitability for soil stabilization, Cem. Concr. Res., 38, 803–815. DOI: 10.1016/j.cemconres.2008.01.011
- Pietrzak, A., Ulewicz, M., 2023. Influence of post-consumer waste thermoplastic elastomers obtained from used car floor mats on concrete properties, Materials, 16(6) 2231, DOI: 10.3390/ma16062231
- Pietrzak, A., Ulewicz, M., Kozien, E., Pietraszek, J., 2025. Application of a mixture of fly ash and solid waste from gas treatment from municipal solid waste incineration in cement mortar, Materials, 18, 481. DOI: 10.3390/ma18030481
- Pietrzak, A., Ulewicz, M., 2025. The mechanical strength of ecological cement mortars based on fly ash from combustion of municipal waste and cement kiln dust, Applied Sciences, 15, 3215. DOI: 10.3390/app15063215
- Popławski, J., 2020. Influence of biomass fly-ash blended with bituminous coal fly-ash on properties of concrete, Construction of Optimized Energy Potential, 9(1), 89-96, DOI: 10.17512/bozpe.2020.1.11
- Rashad, A.M., 2016. A comprehensive overview about recycling rubber as fine aggregate replacement in traditional cementitious materials, International Journal of Sustainable Built Environment, 5, 46–82, DOI: 10.1016/j.ijsbe.2015.11.003
- Ray, S., Haque, M., Sakib, M. N., Mita, A.F., 2021. Rahman, M.D.M., Tanmoy B.B. Use of ceramic wastes as aggregates in concrete production. A review, Journal of Building Engineering, 43, 102567, DOI: 10.1016/j.jobe.2021.102567
- Saikia, N., Mertens, G., Van Balen, K., Elsen, J., Van Gerven, T., Vandecasteele, C., 2015. Pre-treatment of municipal solid waste incineration (MSWI) bottom ash for utilisation in cement mortar, Construction and Building Materials, 96, 76–85. DOI: 10.1016/j.conbuildmat.2015.07.185
- Statista, 2026, on https://www.statista.com/statistics/1087115/global-cementproduction-volume/
- Šadzevičius, R., Gurskis, V., Ramukevičius, D., 2023. Research on the properties of concrete with hemp shives, Construction of Optimized Energy Potential, 12, 25-32, DOI: 10.17512/bozpe.2023.12
- Sharma, R., Bansal, P.P., 2016. Use of different forms of waste plastic in concrete — A review, Journal of Cleaner Production, 112, 473–482. DOI: 10.1016/j.jclepro.2015.08.042
- Tkaczewska, E., 2019. The influence of cement bypass dust on the properties of cement curing under normal and autoclave conditions. Struct. Environ., 11, 5–22. DOI : 10.30540/sae-2019-001
- Tavakoli, D., Hashempour, M., Heidari, A., 2018. Use of Waste Materials in Concrete: A review, Pertanika Journal of Science & Technology, 26(2), 499–522. ISSN: 0128-768
- Udoeyo, F.F., Hyee, A., 2002. Strengths of cement kiln dust concrete, J. Mater. Civ. Eng., 14, 524–526. DOI: 10.1061/(ASCE)0899-1561(2002)14:6(524)
- Ulewicz, M., Halbiniak, J., 2016. Application of waste from utilitarian ceramics for production of cement mortar and concrete, Physicochemical Problems of Mineral Processing, 52(2), 1002−1010. DOI: 10.5277/ppmp160237
- Ulewicz, M., Pietrzak, A., 2021. Properties and structure of concretes doped with production waste of thermoplastic elastomers from the production of car floor mats. Materials, 14(4), 872. DOI: 10.3390/ma14040872
- Ulewicz, M., Jura, J., Zieliński, A., Pietraszek, J., 2024a. The application of converter sludge and slag to produce ecological cement mortars. Materials, 17, 4295. DOI: 10.3390/ma17174295
- Ulewicz, M., Jura, J., Gnatowski, A., 2024. Cement Mortars Based on Polyamide Waste Modified with Fly Ash from Biomass Combustion—A New Material for Sustainable Construction. Sustainability, 16, 3079. DOI: 10.3390/su16073079
- Wojtacha-Rychter, K., Król, M., Gołaszewska, M., Całus-Moszko, J., Magdziarczyk, M., Smolinski, A., 2022. Dust from chlorine bypass installation as cementitious materials replacement in concrete making, J. Build. Eng., 51. DOI: 10.1016/j.jobe.2022.104309
- Yoobanpot, N., Jamsawang, P., Horpibulsuk, S., 2017. Strength behavior and microstructural characteristics of soft clay stabilized with cement kiln dust and fly ash residue. Appl. Clay Sci., 141, 146–156. DOI: 10.1016/j.clay.2017.02.028
- 2000/532/EC: Commission Decision of 3 May 2000 replacing Decision 94/3/EC establishing a list of wastes pursuant to Article 1(a) of Council Directive 75/442/EEC on waste and Council Decision 94/904/EC establishing a list of hazardous waste pursuant to Article 1(4) of Council Directive 91/689/EEC on hazardous waste (notified under document number C(2000) 1147) (Text with EEA relevance)
- PN-EN 197-1:2012 Cement - Cement - Part 1. Composition, requirements and compliance criteria for common-use cements.
- PN-EN 196-1:2016 Cement test methods - Part 1: Determination of strength
- PN-EN 1008:2004 Mixing water for concrete - Specification for sampling, testing and assessment of suitability of mixing water for concrete, including water recovered from concrete production processes
- PN-EN 196-6:2019-01 Cement testing methods - Part 6: Determination of fineness of grinding
- PN-B-04500:1985 Building mortars - Testing of physical and strength properties
- PN-EN 1015-3:2000 Test methods for mortars for walls - Determination of the consistency of fresh mortar (using a flow table)
- PN-EN 1015-6:2000 Testing the bulk density of cement mortar in a dry state in accordance with the standard