A Study of Optimum Conditions for the Production of a Prototype of Nakhon Si Thammarat’s Niello with 3D Printing
References
- Akhoundi, B., & Behravesh, A.H., 2019. Effect of filling pattern on the tensile and flexural mechanical properties of FDM 3D printed products. Experimental Mechanics, 59(6), 883-897. DOI: 10.1007/s11340-018-00467-y.
- Akpakpavi, M.K., Sackey, S.M., & Asante-Afrifa, M.K., 2023. Optimisation of process parameters on tensile strength of 3D printed polylactic acid (PLA) parts: ASTM D638 type–IV. African Journal of Applied Research, 9(2), 104-123. DOI: 10.26437/ajar.v9i2.564.
- Aliheidari, N., Tripuraneni, R., Ameli A., & Nadimpalli, S., 2017. Fracture resistance measurement of fused deposition modeling 3D printed polymers. Polymer Testing, 60, 94-101. DOI: 10.1016/j.polymertesting.2017.03.016.
- ASTM: American Society for Testing and Materials., 2014. ASTM D638: standard test method for tensile properties of plastics. West Conshohocken: ASTM.
- Dave, H.K., Prajapati, A.R., Rajpurohit, S.R., Patadiya, N.H., & Raval, H.K., 2022. Investigation on tensile strength and failure modes of FDM printed part using in-house fabricated PLA filament. Advances in materials and processing technologies, 8(1), 576-597. DOI: 10.1080/2374068X.2020.1829951.
- Dogru, A., Sozen, A., Neser, G., & Ozgur Seydibeyoglu M., 2021. Effects of aging and infill pattern on mechanical properties of hemp reinforced PLA composite produced by fused filament fabrication (FFF). Applied Science and Engineering Progress, 14(4), 651-660. DOI: 10.14416/j.asep.2021.08.007.
- Dong, G., Wijaya, G., Tang, Y., & Zhao, Y. F., 2018. Optimizing process parameters of fused deposition modeling by Taguchi method for the fabrication of lattice structures. Additive Manufacturing, 19, 62-72. DOI: 10.1016/j.addma.2017.11.004.
- Fadillah, F., Suryanto, H., & Suprayitno, S., 2023. Study on effect of 3D printing parameters on surface roughness and tensile strength using analysis of variance. Mechanical Engineering, 7(2), 96-105. DOI: 10.17977/um016v7i22023p096.
- Garg, A., & Bhattacharya, A., 2017. An insight to the failure of FDM parts under tensile loading: finite element analysis and experimental study. International Journal of Mechanical Sciences, 120, 225-236. DOI: 10.1016/j.ijmecsci.2016.11.032.
- Guduru, K.K., & Srinivasu, G., 2020. Effect of post treatment on tensile properties of carbon reinforced PLA composite by 3D printing. Materials Today: Proceedings, 33, 5403-5407. DOI : 10.1016/j.matpr.2020.03.128.
- Hanon, M.M., & Zsidai, L., 2023. Investigation on the accuracy, hardness, and surface roughness of photopolymerization 3D printing technique objects, Proceedings of the 36th Conference of the polymer processing society (PPS)36, 2607(1). DOI: 10.1063/5.0135763.
- Hsueh, M. H., Lai, C. J., Wang, S. H., Zeng, Y. S., Hsieh, C. H., Pan, C. Y., & Huang, W. C. (2021). Effect of printing parameters on the thermal and mechanical properties of 3d-printed pla and petg, using fused deposition modeling. Polymers, 13(11), 1758. DOI: 10.3390/polym13111758.
- Huynh, H.N., Huynh, Q.T., & Bui, T.H., 2025. Improve the surface roughness of resin 3D printed products using RSM Method. Journal of Physics: Conference Series, 2949(1). DOI: 10.1088/1742-6596/2949/1/012031.
- Ismail, K.I., Pang, R., Ahmed R., & Yap, T.C., 2023. Tensile properties of in situ 3D printed glass fiber-reinforced PLA. Polymers, 15(16), 3436. DOI: 10.3390/polym15163436.
- Janmanee, P., & Ratchapakdee, P., 2024. Comparison of artificial neural network and response surface methodology in predicting the tensile strength and optimization of 3D printed objects. Engineering and Applied Science Research, 51(6), 704-715. URL: https://ph01.tcithaijo.org/index.php/easr/article/view/255880.
- Jannet, S., Soundararajan, R., Kandavalli, S. R., & Raja, R., 2024. Wear and friction behavior on extrusion-based 3D printed short carbon fiber reinforced PETG composites with annealing and laser treated effects. Journal of The Institution of Engineers (India): Series D, 1-10. DOI: 10.1007/s40033-024-00794-6.
- Jawad, H.H., Kordani, N., Bagheri, A., & Derazkola, H.A., 2025. Optimization of 3D printing parameters for enhanced mechanical strength: effects of glass fiber reinforcement and fill ratio using RSM and ANOVA. Journal of Composites Science, 9(2), 63. DOI: 10.3390/jcs9020063.
- Liu, J., Gaynor, A.T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C.C.L., Cheng, L., Liang, X., & To, A.C., 2018. Current and future trends in topology optimization for additive manufacturing. Structural and Multidisciplinary Optimization, 57(6), 2457-2483. DOI: 10.1007/s00158-018-1994-3.
- Novakova-Marcincinova, L., Novak-Marcincin, J., & Janak, M., 2014. Precision manufacturing process of parts realized by FDM rapid proto-typing. In Key Engineering Materials, 581, 292–297. DOI: 10.4028/www.scientific.net/kem.581.292.
- Moradi, M., Aminzadeh, A., Rahmatabadi, D., & Hakimi, A., 2021. Experimental investigation on mechanical characterization of 3D printed PLA produced by fused deposition modeling (FDM). Materials Research Express, 8(3), 035304. DOI : 10.1088/2053-1591/abe8f3.
- Myers, R.H., Montgomery, D.C., 1996. Response surface methodology, 1031-1032. DOI:10.1080/15458830.1996.11770760.
- Markiz, N., Horváth, E., & Ficzere, P., 2020. Influence of printing direction on 3D printed ABS specimens. Production Engineering Archives, 26(3), 127-130. DOI:10.30657/pea.2020.26.24.
- Naveed, N., 2021. Investigate the effects of process parameters on material properties and microstructural changes of 3D-printed specimens using fused deposition modelling (FDM). Materials Technology, 36(5), 317-330. DOI :10.1080/10667857.2020.1758475.
- Prater, T., Werkheiser, N., Ledbetter, F., Timucin, D., Wheeler, K., & Snyder, M., 2019. 3D printing in zero g technology demonstration mission: Complete experimental results and summary of related material modeling efforts. The International Journal of Advanced Manufacturing Technology, 101(1), 391-417. DOI:10.1007/s00170-018-2827-7.
- Ranganathan, S., Thangaraj, H.N.R.S., Vasudevan, A.K., & Shanmugan, D.K., 2019. Analogy of thermal properties of Polyamide 6 reinforced with glass fiber and glass beads through FDM process (No. 2019-28-0137). SAE Technical Paper. DOI: 10.4271/2019-28-0137.
- Ranganathan, S., Kumar K, S., Gopal, S., & Palanivelu, R., 2020. Enhancing the tribological properties PETG and CFPETG composites fabricated by FDM via various infill density and annealing (No. 2020-28-0429). SAE Technical Paper. DOI:10.4271/2020-28-0429.
- Ravindrababu, S., Govdeli, Y., Wong, Z. W., & Kayacan, E., 2018. Evaluation of the influence of build and print orientations of unmanned aerial vehicle parts fabricated using fused deposition modeling process. Journal of Manufacturing Processes, 34, 659-666. DOI:10.1016/j.jmapro.2018.07.007.
- Sangkharat, T., & Techawinyutham, L., 2024. Development of screw-based 3D printing machine and process experiments for short fiber reinforced polymer composites. Applied Science and Engineering Progress, 17(2), 7184-7184. DOI: 10.14416/j.asep.2023.11.005.
- Selvam, A., Mayilswamy, S., Whenish, R., Naresh, K., Shanmugam, V., & Das, O., 2022. Multi-objective optimization and prediction of surface roughness and printing time in FFF printed ABS polymer. Scientific Reports, 12(1),16887. DOI: 10.1038/s41598-022-20782-8.
- Shahrubudin, N., Lee, T. C., & Ramlan, R. J. P. M., 2019. An overview on 3D printing technology: Technological, materials, and applications. Procedia Manufacturing, 35, 1286-1296. DOI: 10.1016/j.promfg.2019.06.089.
- Shunmugam, M.N., Sankaranarayanan, S., Pandiarajan, N., Parrthipan, B.K., & Pandiarajan, B., 2024. Enhancing mechanical properties of PLA filaments through orange peel powder reinforcement: Optimization of 3D printing parameters. Applied Science and Engineering Progress, 17(4), 7536. DOI: 10.14416/j.asep.2024.08.011.
- Srinidhi, M.S., Soundararajan, R., Satishkumar, K.S., & Suresh, S., 2021. Enhancing the FDM infill pattern outcomes of mechanical behavior for as-built and annealed PETG and CFPETG composites parts. Materials Today: Proceedings, 45,7208–7212, DOI: 10.1016/j.matpr.2021.02.417.
- Srivabut, C., Ratanawilai, T., & Hiziroglu, S., 2022. Response surface optimization and statistical analysis of composites made from calcium carbonate filler-added recycled polypropylene and rubberwood fiber. Journal of Thermoplastic Composite Materials, 35(3), 391-415. DOI: 10.1177/0892705719889988.
- Sukindar, N. A., Khata, M. T. A. H. M., Yasir, A. S. H. M., Zawawi, M. F., Kamaruddin, S., & Ab Aziz, A. A., 2024. Effect of the printing parameters on the tensile strength and surface roughness of a photopolymer resin using DLP 3D printing. Malaysian Journal of Microscopy, 20(1), 189-200.
- Yuan, L., Ding, S., & Wen, C., 2019. Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: A review. Bioactive Materials, 4, 56-70. DOI :10.1016/j.bioactmat.2018.12.003.
- Zaldivar, R.J., Witkin, D.B., McLouth, T., Patel, D.N., Schmitt, K., & Nokes, J.P., 2017. Influence of processing and orientation print effects on the mechanical and thermal behavior of 3D-printed ULTEM® 9085 material. Additive Manufacturing, 13, 71-80. DOI: 10.1016/j.addma.2016.11.007.
- Zhang, P., Liu, J., & To, A. C., 2017. Role of anisotropic properties on topology optimization of additive manufactured load bearing structures. Scripta Materialia, 135, 148-152. DOI: 10.1016/j.scrip-tamat.2016.10.021
Language: English
Page range: 371 - 380
Submitted on: Dec 29, 2025
Accepted on: May 11, 2026
Published on: Jun 23, 2026
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2026 Pongpun Ratchapakdee, Rungrote Jeendoung, Kamonpong Jamkamon, Chatpon Phimpha, Banthita Poosabmee Ponatong, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution 4.0 License.