References
- Akintunde, I.B., Lindsay, E.E., Olakanmi, E.O., Prasad, R.V.S., Matshediso, B.I., Motimedi, T., Botes, A., Pityana, S.L., 2023. Performance evaluation and failure analysis of conical picks used in a Botswana (Ngwato) mine. Engineering Failure Analysis 143B, 106872. DOI: 10.1016/j.engfailanal.2022.106872
- Biały, W., 2024. Assessment of the technical state of mining machinery and devices with the use of diagnostic methods. Production Engineering Archives 30, 266–272. DOI: 10.30657/pea.2024.30.26
- Biały, W., 2015. Innovative solutions applied in tools for determining coal mechanical proprerties. Management Systems in Production Engineering 202–209. DOI: 10.12914/MSPE-02-04-2015
- Biały, W., 2005. Empiryczne prognozowanie mocy ścianowych kombajnów bębnowych, P.3351. Wydawnictwo Politechniki Śląskiej.
- Biały, W., Fries, J., Galecki, G., 2021. Determination of Coal Cutting Forces Using the Cutting Head of POU-BW/01-WAP Device. Multidisciplinary Aspects of Production Engineering 4, 281–289. DOI: 10.2478/mape-2021-0025
- Bołoz, Ł., 2025. Narzędzia organów urabiających skały. Dobór i projektowanie, badania i eksploatacja. Wydawnictwa AGH, Kraków.
- Bołoz, Ł., 2019. Directions for increasing conical picks’ durability. New Trends in Production Engineering 2, 277–286. DOI: 10.2478/ntpe-2019-0029
- Bołoz, Ł. 2023. Influence of the drill bit tip geometry on the rotary drilling process performed with a hand-held hydraulic drill. Production Engineering Archives, 29(3), 2023. 304-310. DOI: 10.30657/pea.2023.29.35
- Bołoz, Ł., Biały, W., 2023. Methods and Test Benches for Cutting Tools Testing – A Review. Energies 16, 1–17. DOI: 10.3390/en16010445
- Bołoz, Ł., Midor, K., 2019. The procedure of choosing an optimal offer for a conical pick as an element of realizing the sustainable development concept in mining enterprises. AMS 24, 140–150.
- Choudhary, B., Sharma, D., Das, M., 2017. A Study to Investigate the Influence of Coal Properties on Bit Wear-ability of Roadheader. MMC_B 86, 727–739. DOI: 10.18280/mmc_b.860308
- Dewangan, S., Chattopadhyaya, S., Hloch, S., 2015. Wear Assessment of Conical Pick used in Coal Cutting Operation. Rock Mech Rock Eng 48, 2129–2139. DOI: 10.1007/s00603-014-0680-z
- Dewangan, S., Ponsingh Jomy, A., Ashwin Nethran, G., 2022. Modelling and simulation of stress generation and temperature distribution in conical picks during linear coal-cutting process. Materials Today: Proceedings 62, 1458–1464. DOI: 10.1016/j.matpr.2022.01.472
- Fu, L., Du, C., Li, J., Zheng, K., 2015. Influence of pick working angle on cutting performance of auger miner’s aiguille. Advances in Mechanical Engineering 7, 168781401558542. DOI: 10.1177/1687814015585427
- Ingaldi, M., Ulewicz, R., 2025. Sustainable Development and Technological Advancements in Industry 4.0: Overcoming Barriers in SME Sector Integration. Management Systems in Production Engineering 33, 144–162. DOI: 10.2478/mspe-2025-0015
- Jonak, J., 2002. Urabianie skał głowicami wielonarzędziowymi. Wydawnictwo Naukowe “Śląsk,” Katowice.
- Jonak, J., 1998. Teoretyczne podstawy urabiania skał stożkowymi nożami obrotowymi. Wydawnictwa Uczelniane Politechniki Lubelskiej, Lublin.
- Kotwica, K., 2012. Zastosowanie wspomagania wodnego w procesie urabiania skał narzędziami górniczymi. Wydawnictwa AGH, Kraków.
- Kotwica, K., Klich, A., 2011. Maszyny i urządzenia do drążenia wyrobisk korytarzowych i tunelowych. Instytut Techniki Górniczej KOMAG, Gliwice.
- Krauze, K., 2000. Urabianie skał kombajnami ścianowymi. Wydawnictwo Naukowe “Śląsk,” Katowice.
- Krauze, K., Bołoz, Ł., Wydro, T., 2015. Parametric Factors for the Tangential-Rotary Picks Quality Assessment. Archives of Mining Sciences 60, 265–281. DOI: 10.1515/amsc-2015-0018
- Krauze, K., Bołoz, Ł., Wydro, T., Mucha, K., 2017. Durability testing of tangential-rotary picks made of different materials. miag 1 (529), 68. DOI: 10.7494/miag.2017.1.529.68
- Li, H.S., Liu, S.Y., Xu, P.P., 2019. Numerical simulation on interaction stress analysis of rock with conical picks. Tunnelling and Underground Space Technology 85, 231–242. DOI: 10.1016/j.tust.2018.12.014
- Li, X., Lv, Y., Zeng, Q., Wang, J., 2015. Research on Strength of Roadheader Conical Picks Based on Finite Element Analysis. TOMEJ 9, 521–526. DOI: 10.2174/1874155X01509010521
- Liu, S., Ji, H., Liu, X., Jiang, H., 2017. Experimental research on wear of conical pick interacting with coal-rock. Engineering Failure Analysis 74, 172–187. DOI: 10.1016/j.engfailanal.2017.01.013
- Liu, X., Liu, S., Tang, P., 2015. Coal fragment size model in cutting process. Powder Technology 272, 282–289. DOI: 10.1016/j.powtec.2014.12.015
- Midor, K., 2017. Innovation in coal mining management as an intelligent specialization. Production Engineering Archives 15, 41–44. DOI: 10.30657/pea.2017.15.10
- Midor, K., Žarnovský, J., 2016. Innovative Use of Quality Management Methods for Product Improvement. Management Systems in Production Engineering 24, 264–267. DOI: 10.2478/mspe-08-04-2016
- Nikolić, R.R., Marković, S., Arsić, D., Lazić, V., Hadzima, B., Ulewicz, R., 2021. Influence of different hard-facing procedures on quality of surfaces of regenerated gears. Production Engineering Archives 27, 257–264. DOI: 10.30657/pea.2021.27.34
- Podgórski, J., Jonak, J., 2006. Numeryczne badania procesu skrawania skał anizotropowych. Lubelskie Towarzystwo Naukowe, Lublin.
- Prokopenko, S., Li, A., Kurzina, I., Sushko, A., 2016. Improved Operating Performance of Mining Machine Picks. IOP Conf. Ser.: Mater. Sci. Eng. 142, 012115. DOI: 10.1088/1757-899X/142/1/012115
- Sikora, W., Cheluszka, P., Giza, T., Sobota, P., Mann, R., Osadnik, J., 2000. Określenie sił i energochłonności urabiania nożami stożkowymi, ISBN 83-88000-58-6. Wydawnictwo Politechniki Śląskiej, Gliwice.
- Skotnicka-Zasadzien, B., Biały, W., 2011. An analysis of possibilities to use apareto chart for evaluating mining machines’ failure frequency. Eksploatacja i Niezawodnosc - Maintenance and Reliability 51, 51–55.
- Slouka, S., Brune, J., Rostami, J., Tsai, C., Sidrow, E., 2022. Characterization of Respirable Dust Generated from Full Scale Cutting Tests in Limestone with Conical Picks at Three Stages of Wear. Minerals 12, 930. DOI: 10.3390/min12080930
- Vargová, M., Bołoz, Ł., Ťavodová, M., Hnilica, R., 2023. Increasing the Durability of Tools for Forest Road Maintenance. AgriEngineering 5, 566–580. DOI: 10.3390/agriengineering5010036
- Vicen, M., Bokůvka, O., Trško, L., Drbul, M., Nikolić, R., Nový, F., 2022. Influence of Shot Peening on the Wear Behaviour of Medium Carbon Steel. Production Engineering Archives 28, 241–245. DOI: 10.30657/pea.2022.28.29
- Wang, Shaofeng, Sun, L., Li, X., Zhou, J., Du, K., Wang, Shanyong, Khandelwal, M., 2022. Experimental investigation and theoretical analysis of indentations on cuboid hard rock using a conical pick under uniaxial lateral stress. Geomechanics and Geophysics for Geo-Energy and Geo-Resources 8, 34. DOI: 10.1007/s40948-022-00345-x