References
- Al-Zubiedy, A., Kreem, N., 2013. Studying the effect of injection pressure on some mechanical properties for polypropylene material (PP), International journal of multidisciplinary research (IJMR), Jai Hind Education Society, II(6), 09.
- Bahrololoom, M. E., Younesi M., 2009. Effect of temperature and pressure o pressing on mechanical properties of PP-HA bio-composite, Material and design, 30, 3482-3488.
- Charles A. Harper., 2006. Handbook of plastic technologies”, technology seminars, Inc. Maryland, Edition in chief.
- Crawford, R.J., 1987. Plastic engineering, The Queen’s University of Belfast, 2nd Edition.
- Crawford, R.J., 1998. Plastic engineering, The Queen’s University of Belfast, 3rd Edition.
- Flizikowski, J., Al-Zubiedy, A., 2000. Effect of the injection moulding parameters of toothed wheels and type of polyamide material on the kinematic gear ratio of a belt transmission with these wheels, 14th ICCPE, Praga.
- H. Li., 1998. Rheological Behavior of Vinyl Ester Resins, chapter three.
- Hattotuwa, G., Premalal, B., Ismail, H., Baharin, A., 2002. Comparison of the mechanical properties of rice husk powder filled polypropylene composites with talc filled polypropylene composite Polymer Testing, 21, 833-839
- Jaruga, T., Bociga E., 2007. Structure of polypropylene parts result from multicavity injection mold, Journal of Archives of materials Science and Engineering, 28(7), 429-432.
- Koszkul, J, Suberlak, O., 2001, Physical chemistry and polymer properties base, Czestochowa University of Technology Edition, (in Polish).
- Kwiatkowski, D., Nabiałek, J., Postawa, P., 2006. Influence of injection moulding parameters on resistance for cracking on example of PP, Journal of Achievements in Materials and Manufacturing Engineering, 17, 1-2.
- Manas Canada & Salil K. Roy., 2007. Plastic Technology Handbook, 4th Edition, CRC Press, United states of America.
- Nairn, J.A., 2001. Fracture mechanics of composites with residual stresses, imperfect interfaces, and traction-loaded cracks. Composites Science and Technology, 61, 2159-2167.
- Peter Jones, 2008. The Mould Design Guide, Shawbury, Shrewsbury, Shrop-shire, SY4, 4NR, United Kingdom.
- Rahim, N.A.A., Ariff, Z.M., Ariffin, A. and Jikan, S. S., 2011. A study on the effect of filler loading on flow and viscoelastic behavior of polypropylene/kaolin composites, J. Appl. Polym. Sci., 119, 73-83.
- Senol, S., Pasa, Y., 2005. Effects of testing parameters on the mechanical properties of polypropylene random copolymer, Polymer Testing, 24 613–619.
- Sikora, R., Flizikowski, J., Al-Zubiedy, A., 1993. Effect of injection moulding parameters of toothed wheels and type of polyamide material on the kinematic gear ratio of a belt transmission with these wheels. International Polymer Science and Technology, 20(4).
- Strong, A. Brent, 2000. Plastics material and processing, 2nd Edition, Prentice Hall, Upper Saddel River, New Jersy, Columbus Ohio.