Quality control of a metallic dental bur with a diamond coating

Strzelczak, Katarzyna

doi:10.30657/pea.2018.19.06

Abstract

During operation, sterilization and disinfection, the surface working part of dental burs deteriorates. In this study a commercial metallic dental bur with extra coarse gradation (177-250 μ of ceramic embankment), made of a stainless steel were covered with a nickel-diamond composite was examined. The working part of the tool is round-end taper shaped and is intended for crown and bridge preparation. Analysis of microstructure was carried out using Jeol JSM-6610 LV scanning electron microscope with EDX analyzer. After 3 months of operation, the bur can be used for further work in the dental surgery.

References

Ahmed, W., Rego, C.A., Cherry, R., Afzal, A., Ali, N., Hassan, I.U. CVD diamond: controlling structure and morphology, Vacuum, Volume 56, 153-158.10.1016/S0042-207X(99)00147-5
Search in Google Scholar Back to article
Ahmed, W., Sein, H., Jackson, M., Polini, R. 2004. Chemical vapour deposition of diamond films onto tungsten carbide dental burs, Tribology International, Volume 37, 957-964.10.1016/j.triboint.2004.07.013
Search in Google Scholar Back to article
Biel-Gołaska, M., Kalemba, I. 2008. Odporność na zużycie oraz biozgodność narzędzi stomatologicznych ulepszanych różnymi powłokami, Prace Instytutu Odlewnictwa, Tom XLVIII, Zeszyt 1, 29-38.
Search in Google Scholar Back to article
Borges, C.F.M., Magne, P., Pfender, E., Heberlein, J. 1999. Dental diamond burs made with a new technology, The Journal of Prosthetic Dentistry, Volume 82, 73-79.10.1016/S0022-3913(99)70130-7
Open DOI Search in Google Scholar Back to article
Gwoździk, M. Nitkiewicz, Z. Stradomski, Z. Basiaga, M. 2014. Wear resistance of dental burs with a diamond coating, Inżynieria Materiałowa, Volume 2, 143-146.
Search in Google Scholar Back to article
Milewski, G., Hille, A. 2012. Experimental strength analysis of orthodontic extrusion of human anterior teeth, Acta of Bioengineering and Biomechanics, Volume 14 (1), 15-21.
Search in Google Scholar Back to article
Paszenda, Z., Tyrlik-Held, J. 2003. Instrumentarium chirurgiczne, Wydawnictwo Politechniki Śląskiej, Gliwice.
Search in Google Scholar Back to article
Pieniak, D., Niewczas, A.M. 2012. Phenomenological evaluation of fatigue cracking of dental restorations under conditions of cyclic mechanical loads, Acta of Bioengineering and Biomechanics, Volume 14 (2), 9-17.
Search in Google Scholar Back to article
Sein, H., Ahmed, W., Jackson, M., Woodwards, R., Polini, R. 2004. Performance and characterisation of CVD diamond coated, sintered diamond and WC–Co cutting tools for dental and micromachining applications, Thin Solid Films, Volume 447-448, 455-461.10.1016/j.tsf.2003.08.044
Search in Google Scholar Back to article
Song, X., Yin, L. 2012. Surface morphology and fracture in handpiece adjusting of a leucite-reinforced glass ceramic with coarse diamond burs, Materials Science and Engineering A, Volume 534, 193-202.10.1016/j.msea.2011.11.058
Search in Google Scholar Back to article
Stein, H., Ahmed, W., Rego, C. 2002. Application of diamond coatings onto small dental tools, Diamond and Related Materials, Volume 11, 731-735.10.1016/S0925-9635(01)00579-9
Open DOI Search in Google Scholar Back to article

Quality control of a metallic dental bur with a diamond coating

Abstract

Paradigm

My account