References
- 1. Ashtari P. et al. 2003. Influence of Sr and Mn additions on intermetallic compound morphologies in Al-Si-Cu-Fe cast alloys. Materials Transactions, Vol. 44, 12, pp. 2611-2616.
- 2. Bolibruchová D., Žihalová M. 2013. Possibilities of iron elimination in aluminium alloys by vanadium. Manufacturing Technology, Vol. 13, 3, pp. 289-296.
- 3. Bolibruchová D., Žihalová M. 2014. Vanadium influence on iron based intermetallic phases in AlSi6Cu4 alloy. Archives of metallurgy and materials, Vol. 59, 3, pp. 1029-1032.
- 4. Borko K. et al. 2016. The Impact of Sr content on Fe- intermetallic phase´s morphology changes in alloy AlSi10MgMn. Manufacturing Technology, Vol.16, 1, pp. 20-26.
- 5. Darvish A. et al. 2010. The mutual effect of iron and manganese on microstructure and mechanical properties of aluminium-silicon alloy. MjoM, Vol.16, 1, pp. 11-24.
- 6. Hernandez-Rodriguez A. et al. 2014. Effect of the Fe/Mn weight ratio and cooling rate on the area fraction of α-AlFeSi and β-AlFeSi phases in Al-7.5Si-3.75Cu-0.5Mg-0.55Fe-xMn alluminium alloy. Metalurgija, Vol. 53, 3, pp. 314-316.
- 7. Ji S. et al. 2013. Effect of iron on the microstructure and mechanical property of Al–Mg–Si–Mn and Al–Mg–Si diecast alloys. Materials Science and Engineering A, Vol. 564, pp. 130-139.
- 8. Kuchariková L. et al. 2016. Recycling and properties of recycled aluminium alloys used in the transportation industry. Transport problems, Vol. 11, 2, pp. 117-122.
- 9. Petrík J., Horvath M. 2011. The iron correctors in Al-Si alloy. Annals of Faculty Engineering Hunedoara - International Journal of Engineering. Vol. 9, 3, pp.401-405.
- 10. Rana R.S. et al. 2012. Reviews on the Influences of Alloying elements on the microstructure and mechanical properties of aluminum alloys and aluminum alloy composites. International Journal of Scientific and Research Publications, Vol. 2, 6, pp.1-7.
- 11. Švecová I. et al. 2017. Štruktúrna analýza železitých fáz v zliatine AlSi6Cu4. SEMDOK, Terchová, pp. 163-166. (in Slovak)
- 12. Taylor J. A. 2012. Iron-containing intermetallic phases in Al-Si based casting alloys. Procedia Materials Science, 1, pp. 19-33.
- 13. Tillová E. et al. 2011. Quality control of microstructure in recycled Al-Si cast alloys. Manufacturing Technology, vol. 11, pp. 70-76.
- 14. Tillová E., Chalupová M. 2009. Structural analysis (Štruktúrna analýza). EDIS ZU (in Slovak).
- 15. Žihalová M., Bolibruchová D. 2016. Evaluation of V influence in AlSi10MgMn Alloy with increased iron level. Manufacturing Technology, Vol.16, 2, pp. 471-475.