References
- Christensen D.W. and Bonaquist R.: Use of Strength Tests for Evaluating the Rut Resistance of Asphalt Concrete, Journal of the Association of Asphalt Paving Technologists, 71, (2002), 697–711.
- Nizamuddin S., Boom Y.J., and Giustozzi F.: Sustainable Polymers from Recycled Waste Plastics and Their Virgin Counterparts as Bitumen Modifiers: A Comprehensive Review, Polymers, 13 (19), (2021), Art. nr 19, doi: 10.3390/polym13193242.
- Pszczola M., Rys D., and Jaczewski M.: Field Evaluation of High Modulus Asphalt Concrete Resistance to Low-Temperature Cracking, Materials, 15 (1), (2022), 369, doi: 10.3390/ma15010369.
- Dong F. et al.: Influence of SBS and asphalt on SBS dispersion and the performance of modified asphalt, Construction and Building Materials, 62, (2014), 1–7, doi: 10.1016/j.conbuildmat.2014.03.018.
- Airey G.: Rheological properties of styrene butadiene styrene polymer modified road bitumens, Fuel, 82 (14), (2003), Art. nr 14, doi: 10.1016/S0016-2361(03)00146-7.
- Nizamuddin S., Boom Y.J., Giustozzi F.: Sustainable Polymers from Recycled Waste Plastics and Their Virgin Counterparts as Bitumen Modifiers: A Comprehensive Review, Polymers, 13 (19), (2021), 3242, doi: 10.3390/polym13193242.
- Zhu J., Birgisson B., Kringos N.: Polymer modification of bitumen: Advances and challenges, European Polymer Journal, 54, (2014), 18–38, doi: 10.1016/j.eurpolymj.2014.02.005.
- Navarro F., García-Morales M.: The use of waste polymers to modify bitumen, Polymer Modified Bitumen, (2011), 98–135.
- Imanbayev Y. et al.: Modification of Bitumen with Recycled PET Plastics from Waste Materials, Polymers, 14 (21), (2022), 4719, doi: 10.3390/polym14214719.
- Majka T.M., Ostrowski K.A., Piechaczek M.: Research on the Development of a Way to Modify Asphalt Mixtures with PET Recyclates, Materials, 16 (18), (2023), 6258, doi: 10.3390/ma16186258.
- McNally T.: Introduction to polymer modified bitumen (PmB), Polymer Modified Bitumen, Elsevier, 2011, 1–21. doi: 10.1533/9780857093721.1.
- Polacco G., Filippi S., Merusi F., Stastna G.: A review of the fundamentals of polymer-modified asphalts: Asphalt/polymer interactions and principles of compatibility, Advances in Colloid and Interface Science, 224, (2015), 72–112, doi: 10.1016/j.cis.2015.07.010.
- Hamad K., Kaseem M., Deri F.: Recycling of waste from polymer materials: An overview of the recent works, Polymer Degradation and Stability, 98 (12), (2013), Art. nr 12, doi: 10.1016/j.polymdegradstab.2013.09.025.
- Khakimullin Y.N.: Properties of Bitumens Modified by Thermoplastic Elastomers, Mechanics of Composite Materials, 36 (5), (2000), 417–422, doi: 10.1023/A:1026659520096.
- Mazurek G., Buczyński P., Iwański M., Podsiadło M., Pypeć P., Kowalczyk A.: Effects of the Mixing Process on the Rheological Properties of Waste PET-Modified Bitumen, Materials, 16 (23), (2023), Art. nr 23, doi: 10.3390/ma16237271.
- Merkel D.R. et al.: Waste PET Chemical Processing to Terephthalic Amides and Their Effect on Asphalt Performance, ACS Sustainable Chem. Eng., 8 (14), (2020), 5615–5625, doi: 10.1021/acssuschemeng.0c00036.
- Usman I.U., Kunlin M.: Influence of Polyethylene Terephthalate (PET) utilization on the engineering properties of asphalt mixtures: A review, Construction and Building Materials, 411, (2024), 134439, doi: 10.1016/j. conbuildmat.2023.134439.
- Spychaj T., Fabrycy E., Spychaj S., Kacperski M.: Aminolysis and aminoglycolysis of waste poly(ethylene terephthalate), Journal of Material Cycles and Waste Management, 3 (1), (2001), 24–31, doi: 10.1007/s10163-000-0036-5.
- Zalewska A. (red.): I Konferencja Naukowo-Techniczna „Innowacje w przemyśle chemicznym”: monografia, 2nd ed.. Warszawa: Polska Izba Przemysłu Chemicznego, 2018.
- EN 1426: Bitumen and bituminous binders – Determination of needle penetration. 2015.
- EN 1427: Bitumen and bituminous binders – Determination of the softening point – Ring and Ball method. 2015.
- EN 12593: Bitumen and bituminous binders – determination of the Fraass breaking point. 2015.
- EN 13703: Bitumen and bituminous binders – Determination of deformation energy.
- ASTM D4402: Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer. 2015.
- Li R. et al.: Innovative application of waste polyethylene terephthalate (PET) derived additive as an antistripping agent for asphalt mixture: Experimental investigation and molecular dynamics simulation, Fuel, 300, (2021), 121015, doi: 10.1016/j.fuel.2021.121015.
- Ganesan V., Rastogi P.K., Gupta R., Meredith M.T., Minteer S.D.: Ion exchange voltammetry at branched polyethylenimine cross-linked with ethylene glycol diglycidyl ether and sensitive determination of ascorbic acid, Electrochimica Acta, 105, (2013), 31–39, doi: 10.1016/j.electacta.2013.04.178.
- Hoang C.N., Dang Y.H.: Aminolysis of poly(ethylene terephthalate) waste with ethylenediamine and characterization of α,ω-diamine products, Polymer Degradation and Stability, 98 (3), (2013), 697–708, doi: 10.1016/j. polymdegradstab.2012.12.026.
- EN 16659:2015: Bitumen and Bituminous Binders – Multiple Stress Creep and Recovery Test (MSCRT).
- Nielsen L.E., Landel R. F.: Mechanical properties of polymers and composites, 2nd ed., rev. Expanded. New York: M. Dekker, 1994.
- Marques S.P.C., Creus G.J.: Computational viscoelasticity. Heidelberg; New York: Springer, 2012.
- Veryst: MCalibration software from Veryst Engineering. 47 Kearney Road, Needham, MA, USA, 2020.
- Mazurek G.: Analysis of selected properties of asphalt concrete with synthetic wax, Bulletin of the Polish Academy of Sciences Technical Sciences, 66 (2), (2018), Art. nr 2, doi: 10.24425/122102.
- Bernier A., Zofka A., Yut I.: Laboratory evaluation of rutting susceptibility of polymer-modified asphalt mixtures containing recycled pavements, Construction and Building Materials, 31, (2012), 58–66, doi: 10.1016/j.conbuildmat. 2011.12.094.