References
- Yang Y., Bi J., Liu H., Li Y., Li M., Ao S., Luo Z.: Research progress on the microstructure and mechanical properties of friction stir welded Al–Li alloy joints, Journal of Manufacturing Processes, 82 (2022), 230-244.
- Lambiase F., Derazkola H.A., Simchi A.: Friction stir welding and friction spot stir welding processes of polymers-state of the art, Materials, 13 (2020), 2291.
- Çam G., Javaheri V., Heidarzadeh A.: Advances in FSW and FSSW of dissimilar Al-alloy plates, Journal of Adhesion Science and Technology, 37(2) (2023), 162-194.
- Mishra R.S., Ma Z.Y.: Friction stir welding and processing, Materials Science and Engineering: R: Reports, 50 (2005), 1-78.
- He X., Gu F., Ball A.: A review of numerical analysis of friction stir welding, Progress in Materials Science, 65 (2014), 1-66.
- Li K., Liu X., Zhao Y.: Research status and prospect of friction stir processing technology, Coatings, 9(2) (2019), 129.
- Rhodes C.G., Mahoney M.W., Bingel W.H., Spurling R.A., Bampton C.C.: Effects of friction stir welding on microstructure of 7075 aluminum, Scripta Materialia, 36 (1997), 69-75.
- Morisada Y., Fujii H., Nagaoka T., Nogi K., Fukusumi M.: Fullerene/A5083 composites fabricated by material flow during friction stir processing, Composites Part A, 38 (2007), 2097-2101.
- Meng X., Huang Y., Cao J., Shen J., dos Santos J.F.: Recent progress on control strategies for inherent issues in friction stir welding, Progress in Materials Science, 115 (2021), 100706.
- Jemioło S., Gajewski M.: Symulacja MES obróbki cieplnej wyrobów stalowych z uwzględnieniem zjawisk termometalurgicznych, Część 1. Nieustalony przepływ ciepła z uwzględnieniem przejść fazowych, Zeszyty Naukowe, Budownictwo, z. 143, Oficyna Wydawnicza PW, Warszawa 2005.
- Jemioło S., Gajewski M.: Symulacja MES obróbki cieplnej wyrobów stalowych z uwzględnieniem zjawisk termometalurgicznych, Część 2. Przykłady numeryczne z zastosowaniem programu SYSWELD, Zeszyty Naukowe, Budownictwo, z. 143, Oficyna Wydawnicza PW, Warszawa 2005.
- Jemioło S., Gajewski M.: Zastosowanie programu SYSWELD w modelowaniu resztkowych naprężeń pospawalniczych, Zeszyty Naukowe, Budownictwo, z. 143, Oficyna Wydawnicza PW, Warszawa 2005.
- Kossakowski P.G., Wciślik W., Bakalarz M.: Effect of selected friction stir welding parameters on mechanical properties of joints, Archives of Civil Engineering, 65(4) (2019), 51-62.
- Jacquin D., Guillemot G.: A review of microstructural changes occurring during FSW in aluminium alloys and their model-ling, Journal of Materials Processing Technology, 288 (2021), 116706.
- Hamilton C., Dymek S., Dryzek E., Kopyściański M., Pietras A., Węglowska A., Wróbel M.: Application of positron lifetime annihilation spectroscopy for characterization of friction stir welded dissimilar aluminum alloys, Materials Characterization, 132 (2017), 431-436.
- Patel V., Li W., Vairis A., Badheka V.: Recent development in friction stir processing as a solid-state grain refinement technique: microstructural evolution and property enhancement, Critical Reviews in Solid State and Materials Sciences, 5 (2019), 378-426.
- Reynolds A.P.: Visualisation of material flow in autogenous friction stir welds, Science and Technology of Welding and Joining, 5(2) (2000), 120-124;
- Seidel T.U., Reynolds A.P.: Visualization of the material flow in AA2195 friction-stir welds using a marker insert technique, Metallurgical and Materials Transactions A, 32 (2001), 2879-2884.
- Colligan K.: Material flow behavior during friction stir welding of aluminum, Welding Journal, 78 (1999), 229-s-237-s.
- Schmidt H.N.B., Dickerson T.L., Hattel J.H.: Material flow in butt friction stir welds in AA2024-T3, Acta Materialia, 54 (2006), 1199-209.
- Ouyang J.H., Kovacevic R.: Material flow and microstructure in the friction stir butt welds of the same and dissimilar aluminum alloys, Journal of Materials Science, 11 (2002), 51-63.
- Li Y., Murr L.E., McClure J.C.: Solid-state flow visualization in the friction-stir welding of 2024 Al to 6061 Al, Scripta Materialia, 40(9) 1999, 1041-1046.
- Colegrove P.A., Shercliff H.R.: 3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile, Journal of Materials Science, 169 (2005), 320-327.
- Nandan R., DebRoy T., Bhadeshia H.K.D.H.: Recent advances in friction-stir welding – Process, weldment structure and properties, Progress in Materials Science, 53 (2008), 980-1023.
- El-Sayed M.M., Shash A.Y., Mahmoud T.S., Abd-Rabbou M.: Effect of friction stir welding parameters on the peak tem-perature and the mechanical properties of aluminum alloy 5083-O, Advanced Structured Materials, 72 (2018), 11-25.
- El-Sayed M.M., Shash A.Y., Abd-Rabou M., ElSherbiny M.G.: Welding and processing of metallic materials by using friction stir technique: A review, Journal of Advanced Joining Processes, 3 (2021), 100059.
- Cho J.H., Boyce D.E., Dawson P.R.: Modeling strain hardening and texture evolution in friction stir welding of stainless steel, Materials Science and Engineering: A, 398 (2005), 146-163.
- Ma Z.Y.: Friction stir processing technology: A review, Metallurgical and Materials Transactions A, 39 (2008), 642-658.
- Prakash P., Jha S.K., Lal S.P.: Numerical investigation of stirred zone shape and its effect on mechanical properties in friction stir welding process, Welding World, 63 (2019), 1531-1546.
- Chen K., Liu X., Ni J.: A review of friction stir–based processes for joining dissimilar materials, The International Journal of Advanced Manufacturing Technology, 104 (2019), 1709-1731.
- Gallais C., Denquin A., Bréchet Y., Lapasset G.: Precipitation microstructures in an AA6056 aluminium alloy after friction stir welding: characterisation and modelling, Materials Science and Engineering: A, 496 (2008), 77-89.
- Hattel J.H., Schmidt H.N.B., Tutum C.: Thermomechanical modelling of friction stir welding. The 8th International Conference Trends in Welding Research, Pine Mountain, Georgia, USA, 2008.
- Imam M., Biswas K., Racherla V.: On use of weld zone temperatures for online monitoring of weld quality in friction stir welding of naturally aged aluminium alloys, Materials & Design, 52 (2013), 730-739.
- Jacquin D., De Meester B., Simar A., Deloison D., Montheillet F., Desrayaud C.: A simple Eulerian thermomechanical modelling of friction stir welding, Journal of Materials Processing Technology, 211(1) (2011), 57-65.
- Tang W., Guo X., McClure J.C., Murr L.E.: Heat input and temperature distribution in friction stir welding, Journal of Materials Processing and Manufacturing Science, 7(2) (1998), 163-172.
- Sharma V., Prakash U., Kumar B.V.M.: Surface composites by friction stir processing: A review, Journal of Materials Processing Technology, 224 (2015), 117-134.
- Rodrigues D.M., Loureiro A., Leitao C., Leal R.M., Chaparro B.M., Vilaça P.: Influence of friction stir welding parameters on the microstructural and mechanical properties of AA 6016-T4 thin welds, Materials & Design, 30 (2009), 1913-1921.
- Węglowski M.S.: Friction stir processing – State of the art, Archives of Civil and Mechanical Engineering, 18 (2018), 114-129.
- Givi M.K.B., Asadi P.: Advances in friction stir welding and processing. Woodhead Publishing, Amsterdam, 2014.
- Kassner M.E., Barrabes S.: New developments in geometric dynamic recrystallization, Materials Science and Engineering: A, 410 (2005), 152-155.
- Heidarzadeh A., Mironov S., Kaibyshev R., Çam G., Simar A., Gerlich A., Khodabakhshi F., Mostafaei A., Field D.P., Robson J.D., Deschamps A., Withers P.J.: Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution, Progress in Materials Science, 117 (2021), 100752.
- Dudova N., Belyakov A., Sakai T., Kaibyshev R.: Dynamic recrystallization mechanisms operating in a Ni–20% Cr alloy under hot-to-warm working, Acta Materialia, 58 (2010), 3624-3632.
- Liu H., Fujii H.: Microstructural and mechanical properties of a beta-type titanium alloy joint fabricated by friction stir welding, Materials Science and Engineering: A, 711 (2018), 140-148.
- Humphreys F.J., Hatherly M.: Recrystallization and related annealing phenomena, Elsevier, 2004.
- Prabhu S.R.B., Shettigar A.K., Herbet M.A., Rao S.S.: Microstructure evolution and mechanical properties of friction stir welded AA6061/Rutile composite, Materials Research Express, 6(8) (2019), 0865i7.
- Padmanaban G., Balasubramanian V., Sarin Sundar J.K.: Influences of welding processes on microstructure, hardness, and tensile properties of AZ31B magnesium alloy, Journal of Materials Engineering and Performance, 19 (2010), 155-165.
- Wciślik W.: Experimental determination of critical void volume fraction fF for the Gurson Tvergaard Needleman (GTN) model, Procedia Structural Integrity, 2 (2016), 1676-1683.
- Wciślik W., Pała R.: Some microstructural aspects of ductile fracture of metals, Materials, 14(15) (2021), 4321.
- Wciślik W., Lipiec S.: Void-induced ductile fracture of metals: experimental observations, Materials, 15(18) (2022), 6473.
- Dixit S., Mahata A., Mahapatra D.R., Kailas S.V., Chattopadhyay K.: Multi-layer graphene reinforced aluminum – Manufacturing of high strength composite by friction stir alloying, Composites Part B: Engineering, (136) (2018), 63-71.
- Merah N., Azeem M.A., Abubaker H.M., Al-Badour F., Albinmousa J., Sorour A.A.: Friction stir processing influence on microstructure, mechanical, and corrosion behavior of steels: a review, Materials, (14) (2021), 5023.
- Sato Y.S., Nelson T.W., Sterling C.J., Steel R.J., Pettersson C.O.: Microstructure and mechanical properties of friction stir welded SAF 2507 super duplex stainless steel, Materials Science and Engineering: A, (397) (2005), 376-384.
- Kwon Y.J., Saito N., Shigematsu I.: Friction stir process as a new manufacturing technique of ultrafine grained aluminium alloy, Journal of Materials Science, (21) (2002), 1473-1476.
- Saeid T., Abdollah-zadeh A., Assadi H., Malek Ghaini F.: Effect of friction stir welding speed on the microstructure and mechanical properties of a duplex stainless steel, Materials Science and Engineering: A, (496) (2008), 262-268.
- Ma Z.Y., Mishra R.S., Mahoney M.W.: Superplastic deformation behaviour of friction stir processed 7075Al alloy, Acta Materialia, 50(17) (2002), 4419-4430.
- Johnson P., Murugan N.: Microstructure and mechanical properties of friction stir welded AISI321 stainless steel, Journal of Materials Research and Technology, 9(3) (2020), 3967-3976.
- Gain S., Das S.K., Sanyal D., Acharyya S.K.: Exploring friction stir welding for joining 316L steel pipes for industrial applications: Mechanical and metallurgical characterization of the joint and analysis of failure, Engineering Failure Analysis, 150 (2023), 107331.
- Li H., Yang S., Zhang S., Zhang B., Jiang Z., Feng H., Han P., Li J.: Microstructure evolution and mechanical properties of friction stir welding super-austenitic stainless steel S32654, Materials and Design, 118 (2017), 207-217.
- Ahmed M.M.Z., Hajlaoui K., El-Sayed Seleman M.M., Elkady M.F., Ataya S., Latief F.H., Habba M.I.A.: Microstructure and mechanical properties of friction stir welded 2205 duplex stainless steel butt joints, Materials, 14 (2021), 6640.
- Liu F.C., Nelson T.W.: In-situ grain structure and texture evolution during friction stir welding of austenite stainless steel, Materials and Design, 115 (2017), 467-478.
- Salih O.S., Ou H., Sun W., McCartney D.G.: A review of friction stir welding of aluminium matrix composites, Materials & Design, (86) (2015), 61-71.
- Zhang Z., Xiao B.L., Ma Z.Y.: Effect of welding parameters on microstructure and mechanical properties of friction stir welded 2219Al-T6 joints, Journal of Materials Science, (47) (2012), 4075-4086.
- Huang K., Marthinsen K., Zhao Q., Logé R.E.: The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials, Progress in Materials Science, (92) (2018), 284-359.
- Kloc L., Spigarelli S., Cerri E., Evangelista E., Langdon T.G.: Creep behavior of an aluminum 2024 alloy produced by powder metallurgy, Acta Materialia, (45) (1997), 529-540.
- Deschamps A., Fribourg G., Bréchet Y., Chemin J.L., Hutchinson C.R.: In situ evaluation of dynamic precipitation during plastic straining of an Al-Zn-Mg-Cu alloy, Acta Materialia, (60) (2012), 1905-1916.
- Sugimoto I., Park S.H.C., Hirano S., Saito H., Hata S.: Microscopic observation of precipitation behavior at friction stirring zone of super duplex stainless steel, Materials Transactions, 60(9) (2019), 2003-2007.
- Manugula V.L., Rajulapati K.V., Reddy G.M., Mythili R., Bhanu Sankara Rao K.: Influence of tool rotational speed and post-weld heat treatments on friction stir welded reduced activation ferritic-martensitic steel, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 48(8) (2017), 3702-3720.
- Farneze H.N., Tavares S.S.M., Pardal J.M., Londoño A.J.R., Pereira V.F., Barbosa C.: Effects of thermal aging on microstructure and corrosion resistance of AISI 317L steel weld metal in the FSW process, Materials Research, 18(2) (2015), 98-103.
- He B., Cui L., Wang D.P., Li H.J., Liu C.X.: Microstructure and mechanical properties of RAFM-316L dissimilar joints by friction stir welding with different butt joining modes, Acta Metallurgica Sinica (English Letters), 33 (2020), 135-146.
- Ma Z.Y., Sharma S.R., Mishra R.S., Mahoney M.W.: Unpublished results.
- Dumont M., Steuwer A., Deschamps A., Peel M., Withers P.J.: Microstructure mapping in friction stir welds of 7449 alu-minium alloy using SAXS, Acta Materialia, (54) (2006), 4793-4801.
- Genevois C., Deschamps A., Denquin A., Doisneau-Cottignies B.: Quantitative investigation of precipitation and mechanical behaviour for AA2024 friction stir welds, Acta Materialia, (53) (2005), 2447-2458.
- Bastow T.J., Hill A.: Guinier-Preston and Guinier-Preston-Bagaryatsky zone reversion in Al-Cu-Mg alloys studied by NMR, Materials Science Forum, (519-521) (2006), 1385-1390.
- Morozova I., Królicka A., Obrosov A., Yang Y., Doynov N., Weiß S., Michailov V.: Precipitation phenomena in impulse friction stir welded 2024 aluminium alloy, Materials Science and Engineering A, (852) (2022), 143617.
- Ehrich J., Staron P., Karkar A., Roos A., Hanke S.: Precipitation evolution in the heat-affected zone and coating material of AA2024 processed by friction surfacing, Advanced Engineering Materials, (24) (2022), 2201019.
- Ostermann F.: Anwendungstechnologie aluminium. Springer-Verlag, Berlin, 2014.
- Sauvage X., Dédé A., Cabello Muñoz A., Huneau B.: Precipitate stability and recrystallisation in the weld nuggets of friction stir welded Al-Mg-Si and Al-Mg-Sc alloys, Materials Science and Engineering A, (491) (2008), 364-371.
- Hamilton C., Dymek S., Kopyściański M., Węglowska A., Pietras A.: Numerically based phase transformation maps for dissimilar aluminum alloys joined by friction stir-welding, Metals, 8(5) (2018), 324.
- Santos T.G., Miranda R.M., Vilaça P., Teixeira J.P., dos Santos J.: Microstructural mapping of friction stir welded AA 7075-T6 and AlMgSc alloys using electrical conductivity, Science and Technology of Welding and Joining, 16(7) (2011), 630-635.
- Hou J.C., Liu H.J., Zhao Y.Q.: Influences of rotation speed on microstructures and mechanical properties of 6061–T6 aluminum alloy joints fabricated by selfreacting friction stir welding tool, International Journal of Advanced Manufacturing Technology, (73) (2014), 1073-1079.
- Zhao Y., Wang C., Dong C.: Microstructural characteristics and mechanical properties of water cooling bobbin-tool friction stir welded 6063-T6 aluminum, MATEC Web of Conferences, (206) (2018), 03002.