References
- Liu S., Mo L., Wang K., Xie Y., Woldekidan M.F.: Preparation, Microstructure and Rheological Properties of Asphalt Sealants for Bridge Expansion Joints. Constr. Build. Mater. 2016, 105, 1-13, doi:10.1016/j.conbuildmat.2015.12.017.
- Flexible Asphaltic PluG Expansion Joints for Road Bridges; EAD 120093; European assessment documents and European technical assessments, 2019.
- Yu T., Li C., Wu S.: Performance of Polymer Modified Asphalt Bridge Expansion Joints in Low-Temperature Regions. J. Perform. Constr. Facil. 2009, 23, 227-233, doi:10.1061/(ASCE)0887-3828(2009)23:4(227).
- Tan X., Zhang J., Guo D., Sun G., Zhou Y., Zhang W., Guan Y.: Preparation, Characterization and Repeated Repair Ability Evaluation of Asphalt-Based Crack Sealant Containing Microencapsulated Epoxy Resin and Curing Agent. Constr. Build. Mater. 2020, 256, 119433, doi:10.1016/j.conbuildmat.2020.119433.
- Masson J.-F., Collins P., Bundalo-Perc S., Woods J.R., Al-Qadi I.: Variations in Composition and Rheology of Bituminous Crack Sealants for Pavement Maintenance. Transp. Res. Rec. J. Transp. Res. Board 2005, 1933, 107-112, doi:10.1177/0361198105193300112.
- Ghabchi R., Arshadi A., Zaman M., March F.: Technical Challenges of Utilizing Ground Tire Rubber in Asphalt Pavements in the United States. Materials (Basel). 2021, 14, 4482, doi:10.3390/ma14164482.
- Flexible Asphaltic PluG Expansion Joints for Road Bridges; EAD 120093; European assessment documents and European technical assessments, 2019.
- Di Mascio P., Loprencipe G., Moretti L., Puzzo L., Zoccali P.: Bridge Expansion Joint in Road Transition Curve: Effects Assessment on Heavy Vehicles. Appl. Sci. 2017, 7, 599, doi:10.3390/app7060599.
- Lima J.M., Brito J.: Inspection Survey of 150 Expansion Joints in Road Bridges. Eng. Struct. 2009, 31, 1077-1084, doi: https://doi.org/10.1016/j.engstruct.2009.01.011.
- EN 14188-1; Joint Fillers and Sealants – Part 1: Specifications for Hot Applied Sealants. In: Comité Européen de Normalisation (CEN): Brussels, Belgium, 2004.
- ASTM D6690. Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements, 2001.
- Wang S., Xu Y., Liu M., Gao Y., Jia Y., Li Y., Chen Z., Wei Z.: Dynamic Behavior of Crack Sealant Bonding Interface in the Asphalt Pavement Crack Repair Structure under Moving Vehicle Load. Case Stud. Constr. Mater. 2023, 18, e01821, doi:10.1016/j.cscm.2022.e01821.
- Cao L., Yang C., Dong Z., Nonde L.: Evaluation of Crack Sealant Adhesion Properties under Complex Service Ambient Conditions Based on the Weak Boundary Layer (WBL) Theory. Constr. Build. Mater. 2019, 200, 293-300, doi:10.1016/j.conbuildmat.2018.12.159.
- Cao L., Yang C., Dong Z., Wang W., Yin H.: Aging Mechanism of Hot-Poured Sealants for Asphalt Pavement under Natural Environmental Exposure. Int. J. Pavement Eng. 2022, 23, 197-206, doi:10.1080/10298436.2020.1736296.
- Lamarre A., Fini E.H., Abu-Lebdeh T.M.: Investigating Effects of Water Conditioning on the Adhesion Properties of Crack Sealant. Am. J. Eng. Appl. Sci. 2016, 9, 178-186, doi:10.3844/ajeassp.2016.178.186.
- Iwanski M.M., Chomicz-Kowalska A., Maciejewski K.: Impact of Additives on the Foamability of a Road Paving Bitumen. In: Proceedings of the IOP Conference Series: Materials Science and Engineering; 2019; Vol. 603.
- Iwański M., Mazurek G., Buczyński P., Iwański M.M.: Effects of Hydraulic Binder Composition on the Rheological Characteristics of Recycled Mixtures with Foamed Bitumen for Full Depth Reclamation. Constr. Build. Mater. 2022, 330, 127274, doi:10.1016/j.conbuildmat.2022.127274.
- Iwański M., Chomicz-Kowalska A., Mazurek G., Buczyński P., Cholewińska M., Iwański M.M., Maciejewski K., Ramiączek P.: Effects of the Water-Based Foaming Process on the Basic and Rheological Properties of Bitumen 70/100. Materials (Basel). 2021, 14, 2803, doi:10.3390/ma14112803.
- Stępień J., Maciejewski K.: Using Reclaimed Cement Concrete in Pavement Base Mixes with Foamed Bitumen Produced in Cold Recycling Technology. Materials (Basel). 2022, 15, 5175, doi:10.3390/ma15155175.
- Chomicz-Kowalska A., Bartos J., Maciejewski K., Remisova E., Komacka J., Holy M.: The Effect of WMA Additive on Basic Properties of 35/50 and 50/70 Foamed Road Bitumen. Struct. Environ. 2019, 11, 126-138.
- Gong Y., Pang Y., He F., Bi H.: Investigation on Preparation and Properties of Crack Sealants Based on CNTs/SBS Composite-Modified Asphalt. Materials (Basel). 2021, 14, 4569, doi:10.3390/ma14164569.
- Smith K.L., Romine R.A.: Materials and Procedures for Sealing and Filling Cracks in Asphalt-Surfaced Pavements. FHWA-RD-99-147. 2001, 85 p.
- Wang X.L., Yu J.Y., Cheng S.B., Kuang D.L.: Preparation and Properties of MAH-g-SBS Modified Asphalt Crack Filling Material. Wuhan Ligong Daxue Xuebao/Journal Wuhan Univ. Technol. 2007, 29, 59-61.
- Zhang H., Sheng X., Wang S., Xu T.: Efects of Diferent Modifers on Thermal Stability, Constituents and Microstructures of Asphalt-based Sealant. J. Therm. Anal. Calorim. 2020, 142, 1183-1192.
- Maciejewski K., Ramiaczek P., Chomicz-Kowalska A.: The Impact of EBA and ECB Polymer Modification of 50/70 Bitumen. Struct. Environ. 2013, 5, 15-20.
- Gong Y., Wu S., Zhang Y., Pang Y., Ma Y.: Investigation of the High-Temperature and Rheological Properties for Asphalt Sealant Modified by SBS and Rubber Crumb. Polymers (Basel). 2022, 14, 2558, doi:10.3390/polym14132558.
- Gnatenko R., Tsyrkunova K., Zhdanyuk V.: Technological Sides of Crack Sealing in Asphalt Pavements. Transp. Res. Procedia 2016, 14, 804-810, doi:10.1016/j.trpro.2016.05.028.
- Holý M., Remišová E.: Analysis of Influence of Bitumen Composition on the Properties Represented by Empirical and Viscosity Test. Transp. Res. Procedia 2019, 40, 34-41, doi:10.1016/j.trpro.2019.07.007.
- Remisova E., Briliak D., Holy M.: Evaluation of Thermo-Viscous Properties of Bitumen Concerning the Chemical Composition. Materials (Basel). 2023, 16, 1379, doi:10.3390/ma16041379.
- Di Mascio P., Loprencipe G., Moretti L., Puzzo L., Zoccali P.: Bridge Expansion Joint in Road Transition Curve: Effects Assessment on Heavy Vehicles. Appl. Sci. 2017, 7, 599, doi:10.3390/app7060599.
- https://danlab.pl/ (access: 29 November, 2023).
- EN 13880-1: Hot Applied Joint Sealants Test Method for the Determination of Density at 25°C; Comité Européen de Normalisation (CEN): Brussels, Belgium.
- EN 1427: Bitumen and Bituminous Binders – Determination of the Softening Point – Ring and Ball Method; Comité Européen de Normalisation (CEN): Brussels, Belgium.
- EN 13880-2: Hot Applied Joint Sealants – Part 2: Test Method for the Determination of Cone Penetration at 25°C; Comité Européen de Normalisation (CEN): Brussels, Belgium.
- EN 13880-3: Hot Applied Joint Sealants Test Method for the Determination of Penetration and Recovery (Resilience); Comité Européen de Normalisation (CEN): Brussels, Belgium.
- Stępień J., Remišová E.: Characterization of Hot-Applied Joint Sealants and Their Components in Terms of Their Chemical Composition and Basic Performance Properties. Materials (Basel). 2023, 16, 1-23, doi: https://doi.org/10.3390/ma16196490https://doi.org/10.3390/ma16196490.
- Putman B.J., Amirkhanian S.N.: Characterization of the Interaction Effect of Crumb Rubber Modified Binders Using HP-GPC. J. Mater. Civ. Eng. 2010, 22, 153-159, doi:10.1061/(ASCE)0899-1561(2010)22:2(153).
- PN-EN 14023:2011/Ap1:2014-04: Asfalty i lepiszcza asfaltowe. Zasady klasyfikacji asfaltów modyfikowanych polimerami; PKN, P.K.N., Ed.; Warsaw, Poland.
- EN 1426: Bitumen and Bituminous Binders – Determination of Needle Penetration; Comité Européen de Normalisation (CEN): Brussels, Belgium.
- EN 12593: Bitumen and Bituminous Binders – Determination of the Fraass Breaking Point; Comité Européen de Normalisation (CEN): Brussels, Belgium.
- EN 13398: Bitumen and Bituminous Binders – Determination of the Elastic Recovery of Modified Bitumen; Comité Européen de Normalisation (CEN): Brussels, Belgium.
- EN 12591: Bitumen and Bituminous Binders – Specifications for Paving Grade Bitumens; Comité Européen de Normalisation (CEN): Brussels, Belgium.
- Gong Y., Wu S., Zhang Y., Pang Y., Ma Y.: Investigation of the High-Temperature and Rheological Properties for Asphalt Sealant Modified by SBS and Rubber Crumb. Polymers (Basel). 2022, 14, 2558, doi:10.3390/polym14132558.
- Alfaqawi R.M., Fareed A., Zaidi S.B.A., Airey G.D., Rahim A.: Effect of Hydrated Lime and Other Mineral Fillers on Stiffening and Oxidative Ageing in Bitumen Mastic. Constr. Build. Mater. 2022, 315, 125789, doi:10.1016/j. conbuildmat.2021.125789.
- Iwański M., Chomicz-Kowalska A., Iwański M.M.: Influence of Hydrated Lime on Durability of SMA Asphalt Pavement with Quartzite Aggregate. Struct. Environ. 2013, 5, 5-11.