References
- ASCE:7-05, Minimum Design Loads for Buildings and other Structures, Structural Engineering Institute of the American Society of Civil Engineers, Reston, VA, USA, 2002.
- Amin J.A., Ahuja A.K. (2013): Effects of side ratio on wind-induced pressure distribution on rectangular buildings. Journal of Structures.
- Bangladesh National Building Code. (2020): Dhaka, Bangladesh: Housing and Building Research Institute.
- Baskaran A., Stathopoulos T. (1993): Numerical computation of wind pressures on buildings. Computers &structures, 46(6), 1029-1039; doi.org/10.1016/0045-7949(93)90089-V.
- Baskaran A., Stathopoulos T. (1989): Computational evaluation of wind effects on buildings. Building and Environment, 24(4), 325-333; doi.org/10.1016/0360-1323(89)90027-9.
- Blocken B. (2014): 50 years of computational wind engineering: past, present and future. Journal of Wind Engineering and Industrial Aerodynamics, 129, 69-102; doi.org/10.1016/j.jweia.2014.03.008.
- Franke J., Hirsch C., Jensen A., Krüs H., Schatzmann M., Westbury P., Wright, N.G. (2004): Recommendations on the use of CFD in wind engineering, COST Action C14: Impact of Wind and Storm on City Life and Built Environment, von Karman Institute for Fluid Dynamics.
- Jóźwiak R., Kacprzyk J., Zurańsk J.A. (1995): Wind tunnel investigations of interference effects on pressure distribution on a building. Journal of wind engineering and industrial aerodynamics, 57(2-3), 159-166; doi.org/10.1016/0167-6105(95)00004-B.
- Kareem A. (1990): Measurements of pressure and force fields on building models in simulated atmospheric flows. Journal of Wind Engineering and Industrial Aerodynamics, 36, 589-599; doi.org/10.1016/0167-6105(90)90341-9.
- Kareem A., Cermak J.E. (1984): Pressure fluctuations on a square building model in boundary-layer flows. Journal of Wind Engineering and Industrial Aerodynamics, 16(1), 17-41; doi.org/10.1016/0167-6105(84)90047-3.
- Kwon D.K., Kareem A. (2013): Comparative study of major international wind codes and standards for wind effects on tall buildings. Engineering Structures, 51, 23-35; doi.org/10.1016/j.engstruct.2013.01.008.
- Kim W.W., Menon S. (1997): Application of the localized dynamic subgrid-scale model to turbulent wall-bounded flows. Technical report AIAA-97-0210. Reno (NV): American Institute of Aeronautics and Astronautics, 35th Aerospace Sciences Meeting.
- Lee B.E. (1975): The effect of turbulence on the surface pressure field of a square prism. Journal of Fluid Mechanics, 69(2), 263-282; doi.org/10.1017/S0022112075001437.
- Miyata T., Miyazaki M. (1980): Turbulence effects on aerodynamic response of rectangular bluff cylinders. In Wind Engineering (pp. 631-642). Pergamon.
- Murakami S., Mochida A., Hibi K. (1987): Three-dimensional numerical simulation of air flow around a cubic model by means of large eddy simulation. Journal of Wind Engineering and Industrial Aerodynamics, 25(3), 291-305; doi.org/10.1016/0167-6105(87)90023-7.
- Murakami S., Mochida A. (1988): 3-D numerical simulation of airflow around a cubic model by means of the k-ϵ model. Journal of Wind Engineering and Industrial Aerodynamics, 31(2-3), 283-303.
- Standards Australia. (2011). AS/NZS 1170.2 Structural Design Actions, Part 2 Wind Actions; doi.org/10.1016/0167-6105(88)90009-8.
- Saathoff P.J., Melbourne W.H. (1989): The generation of peak pressures in separated/reattaching flows. Journal of Wind Engineering and Industrial Aerodynamics, 32(1-2), 121-134; doi.org/10.1016/0167-6105(89)90023-8.
- Stathopoulos T., Baskaran B.A. (1996): Computer simulation of wind environmental conditions around buildings. Engineering structures, 18(11), 876-885; doi.org/10.1016/0141-0296(95)00155-7.
- Vickery B.J. (1966): Fluctuating lift and drag on a long cylinder of square cross-section in a smooth and in a turbulent stream. Journal of Fluid Mechanics, 25(3), 481-494; doi.org/10.1017/S002211206600020X.