References
- Abdi D.S., Bitsuamlak, G.T., (2016), Wind flow simulations in idealized and real built environments with models of various level of complexity. Wind and Structures, 22(4), 503-524. https://doi.org/10.12989/was.2016.22.4.503.
- Abdullah F., Islam Z., Asif M.A.T., Ali S., (2021), A Comparative Study of Lateral Load Analysis Considering Two BNBC Codes Using ETABS Software, American Journal of Civil Engineering, 9(4), 118-126, https://doi.org/10.11648/j.ajce.20210904.13.
- Allegrini J., Dorer V., Carmeliet J., (2014), Buoyant flows in street canyons: Validation of CFD simulations with wind tunnel measurements, Building and Environment, 72, 63-74. https://doi.org/10.1016/j.buildenv.2013.10.021.
- ASCE/SEI 7-10. (2010), Minimum design loads for buildings and other structures. In American Society of Civil Engineers.
- Bangladesh National Building Code, BNBC, 2006, Housing and Building Research Institute and Bangladesh Standard and Testing Institute, Bangladesh.
- Bangladesh National Building Code, BNBC, 2020, Housing and Building Research Institute and Bangladesh Standard and Testing Institute, Bangladesh.
- Barlow J.B., Rae W.H., Pope A., (1999), Low-speed wind tunnel testing. John Wiley & Sons.
- Bendjebbas H., Abdellah-ElHadj A., Abbas M., (2016), Full-scale, wind tunnel and CFD analysis methods of wind loads on heliostats: A review. Renewable and Sustainable Energy Reviews, 54, 452-472, https://doi.org/10.1016/j.rser.2015.10.031.
- Braun A.L., Awruch A.M., (2009), Aerodynamic and aeroelastic analyses on the CAARC standard tall building model using numerical simulation, Computers & Structures, 87(9-10), 564-581, https://doi.org/10.1016/j.compstruc.2009.02.002.
- Charisi S., Thiis T.K., Aurlien T., (2019), Full-scale measurements of wind-pressure coefficients in twin medium-rise buildings, Buildings, 9(3), 63, https://doi.org/10.3390/buildings9030063.
- Computers and Structures Inc., (2022). ETABS Integrated Software for Structural Analysis and Design. [Online] Available: https://www.csiamerica.com/products/etabs. [10 January 2022].
- Costola D., Blocken B., Hensen J.L.M., (2009), Overview of pressure coefficient data in building energy simulation and airflow network programs, Building and Environment, 44(10), 2027-2036, https://doi.org/10.1016/j.buildenv.2009.02.006.
- Dlubal Software GmbH, (2022), RWIND Simulation, Wind Simulation (Wind Tunnel), [Online] Available: https://www.dlubal.com/en/products/stand-alone-structural-analysis-software/rwind-simulation. [6 March 2022].
- Douvi C.E., Tsavalos I.A., Margaris P.D., (2012), Evaluation of the turbulence models for the simulation of the flow over a National Advisory Committee for Aeronautics (NACA) 0012 airfoil. Journal of Mechanical Engineering Research, 4(3), 100-111. https://doi.org/10.5897/jmer11.074.
- El-Behery S.M., Hamed M.H., (2011), A comparative study of turbulence models performance for separating flow in a planar asymmetric diffuser. Computers & Fluids, 44(1), 248-257, https://doi.org/10.1016/j.compfluid.2011.01.009.
- Flay R.G., Carpenter P., Revell, M., Cenek, P., Turner, R., King, A., (2013), Full-scale wind engineering measurements in New Zealand, In The 8th Asia-Pacific conference on wind engineering, (pp. 10-14), https://doi.org/10.3850/978-981-07-8012-8_key-09.
- Fouad N.S., Mahmoud G.H., Nasr N.E., (2018), Comparative study of international codes wind loads and CFD results for low rise buildings. Alexandria Engineering Journal, 57(4), 3623-3639, https://doi.org/10.1016/j.aej.2017.11.023
- Hasan M., Debnath S., Akther A., (2022), Comparative Study of Lateral Loads and Its Cost Effect on RC Moment Frame and Wall-frame Building According to BNBC 2020 in Different Zones of Bangladesh.
- Irtaza H., Beale R.G., Godley M.H.R., Jameel A., (2013), Comparison of wind pressure measurements on Silsoe experimental building from full-scale observation, wind-tunnel experiments and various CFD techniques. International Journal of Engineering, Science and Technology, 5(1), 28-41, https://doi.org/10.4314/ijest.v5i1.3.
- Juretić F., Kozmar H., (2013), Computational modeling of the neutrally stratified atmospheric boundary layer flow using the standard k–ε turbulence model, Journal of Wind Engineering and Industrial Aerodynamics, 115, 112-120, https://doi.org/10.1016/j.jweia.2013.01.011.
- Liu Z., Chen J., Xia Y., Zheng Y., (2021), Automatic sizing functions for unstructured mesh generation revisited. Engineering Computations, https://doi.org/10.1108/ec-12-2020-0700.
- Tan H., Pillai K.M., (2009), Finite element implementation of stress-jump and stress-continuity conditions at porous-medium, clear-fluid interface. Computers & Fluids, 38(6), 1118-1131, https://doi.org/10.1016/j.compfluid.2008.11.006.
- Vino G., Watkins S., Mousley P., Watmuff J., Prasad S., (2005), Flow structures in the near-wake of the Ahmed model. Journal of Fluids and Structures, 20(5), 673-695, https://doi.org/10.1016/j.jfluidstructs.2005.03.006.