Technical Aspects of Measurements Using the Pull-Off Method

Skowera, Karol; Foksa, Anna

doi:10.30540/sae-2021-009

Abstract

The article presents an analysis of the technical use aspects of the pull-off method for testing the repair layers applied to concrete elements, based on the standards requirements. The use of non-destructive testing methods is the only option in some cases. However, it is very important to pay attention to their proper use or even preparation for research. The pull-off method requires just such diligence to be able to properly interpret the obtained results. The article compares the results of the research in which the pull-off method was used in various configurations. The obtained measurement results were compared with each other and analyzed in terms of their usefulness.

References

[1] Detailed technical specification for the execution and acceptance of construction works - Repair of concrete and reinforced concrete structures, type PCC I (surfaces on which traffic takes place, dynamically loaded) and type PCC II (surfaces on which there is no traffic, dynamically loaded), code: 4526330 Works in concrete repair – in Polish.
Search in Google Scholar Back to article
[2] http://home.agh.edu.pl/~dhajto/materialy/podst-4b.pdf (access on 09/12/2021).
Search in Google Scholar Back to article
[3] Dziewiecki A., Technologies for testing concrete elements with particular emphasis on non-destructive methods of compressive strength estimation with the use of N-type Schmidt hammer, Construction Survey Center, Warsaw, 2016 – in Polish.
Search in Google Scholar Back to article
[4] Śledziewski K., Non-destructive testing of concrete strength in bridge structures – sclerometric method, Lublin University of Technology, 2012 – in Polish.
Search in Google Scholar Back to article
[5] Brunarski L., Runkiewicz L., Basics and examples of the use of non-destructive methods in the testing of concrete structures, Scientific Work of the Building Research Institute, Series of monographs, Vol. 38, Warsaw 1983 – in Polish.
Search in Google Scholar Back to article
[6] Ramos N.M.M., Simoes M.L., Delgado J.M.P.Q., de Freitas V.P., Reliability of the pull-off test for in-situ evaluation of adhesion strength, Construction and Building Materials, 2012, Vol. 31, pp. 86-93.10.1016/j.conbuildmat.2011.12.097
Search in Google Scholar Back to article
[7] Sadowski Ł., Non-destructive identification of pull-off adhesion between concreto layers, Automation in Construction, 2015, Vol. 57, pp. 146-155.10.1016/j.autcon.2015.06.004
Search in Google Scholar Back to article
[8] Cleland D.J., Long A.E., The pull-off test for concreto patch repairs, Structures and Buildings, 1997 Vol. 122, issue: 4, pp.: 451-460.10.1680/istbu.1997.29833
Search in Google Scholar Back to article
[9] Bungey J.H., Madandoust R., Factors influencing pull-off tests on concrete, Magazine of Concrete Research, 1992 Vol. 44, issue: 158, pp. 21-30.10.1680/macr.1992.44.158.21
Search in Google Scholar Back to article
[10] Bonaldo E., Barros J.A.O., Lourenco P.B., Bond characterization between concreto substrate and repairing SFRC using pull-off testing, International Journal of Adhesion and Adhesives, 2005 Vol. 25, issue: 6, pp. 463-474.10.1016/j.ijadhadh.2005.01.002
Search in Google Scholar Back to article
[11] Małolepszy J., Concrete technology: test methods, AGH University of Science and Technology Publications, Cracow 2000 – in Polish.
Search in Google Scholar Back to article
[12] Drobiec Ł., Jasiński R., Piekarczyk A., Diagnostics of reinforced concrete structures, Methodology, field tests, laboratory tests of concrete and steel, Scientific Publisher PWN, Vol. 1, Warsaw 2010 – in Polish.
Search in Google Scholar Back to article
[13] Chmielewska B., Assessment of adhesion of repair materials to the base – laboratory and construction site methods, Building Materials, Vol. 6, 2006 – in Polish.
Search in Google Scholar Back to article
[14] http://korbet.pl/ocena-jakosci-i-wytrzymalosci-betonu-w-konstrukcji/pull_off (access on 09/12/2021)
Search in Google Scholar Back to article
[15] PN-EN 1542:2000 Products and systems for the protection and repair of concrete structures. Test methods. Measurement of adhesion by tearing off – in Polish.
Search in Google Scholar Back to article
[16] PN-EN 1348:2008 Tile adhesives – Adhesion determination for cementitious adhesives – in Polish.
Search in Google Scholar Back to article

Technical Aspects of Measurements Using the Pull-Off Method

Abstract

Paradigm

My account